Your cart is empty.
Your cart is empty.Product Description
Fishing Rod Repair Kit and Supplies
OJY&DOIIIY fishing rod repair kit and supplies contains all necessary supplies for repairing the broken rods or building a new rods. (Fishing rod parts not included in this kit)
Detailed supplies list goes here:
1 Fishing rod epoxy A+B: 2fl.oz
2 Sand paper x 6
3 Black wrapping thread of 300d, 1 roll
4 Thread clipper
5 Rod building finish mixing cup x 1
6 Brushes x 4
Ken B
2025-07-25 15:58:22
I had to replace an eye on one of my rods. This kit contained everything I needed, except directions and the eyes, which I purchased seperatley. You have to cut off your original eye, remove the residue with included sandpaper, then use the tape to hold the eye temporarily. Start wrapping the tape from the eye back toward the rod, I also used the tape to hold my tag end out of the way while I wrapped. Finish by tying it off. I used the 2 part epoxy mixed very well in the provided cup (a little goes a long way) applied with the brush in the kit and let it sit overnight. I did apply a second coat the next day after trimming off all the tag ends. Worked great. Note that this has a clear epoxy, my original is black, so color doesn't match my other eyes.
Skip C Walnut Creek CA
2025-07-20 12:37:52
If you are a fly fisherman, or a "bank" fisherman (gear head). This is a must for the money. Can fix a rod on the fly...forgive the pun.
Dennis E
2025-07-07 10:57:30
This kit gave me the extra hand I needed to repair a fly rod. The only problem I had with it was the components wouldn't stay aligned when holding the rod during eye wrapping. I built a track to resolve this out of scrap wood to keep the components aligned and it worked great. The epoxy and wrapping thread gave the repaired fly rod a good durable finish, considering it was my first repair.
J. L.
2025-06-10 12:28:02
The media could not be loaded.
Bee K.
2025-04-08 12:11:55
Bought it to do a guide on my rod. Looks nice when dried and done. The dry time take a few hours and the rod will need to be rotated constantly to prevent the glue from sagging from gravity.
chuck marcinko
2025-02-07 16:37:17
Works just as described!
PJG55
2025-01-15 09:46:21
This was just right to replace damaged guides on several rods with plenty left over for future repairs. All the materials and tools needed were included with very clear instructions. Epoxy was easy to work with and dried smooth and clear. Definitely recommend.
John D
2024-12-24 18:30:01
The tools in this kit are good for the price, but the epoxy dries so slowly that unless you have a motorized rig to rotate the rod you will sit there for a long time rotating by hand to keep it from dripping.
Recommended Products