Your cart is empty.
Your cart is empty.Product Description
BNC Male Plug to 2X 4mm Dual Banana Female Jack Socket Binding Post
BNC Male to Binding Post Banana Female Jack
Used for adapting single BNC Plug to Dual Banana Jack and Provides isolation for a four terminal network
Binding posts facilitate connections of test leads or additional components
Connections can be made to the binding posts by spade lugs, banana plugs or wire leads
Omega Man
2025-08-31 09:10:23
If you have an oscilloscope or signal/function/waveform generator, or similar equipment, you need these for really short probe wires to minimize LCR, or connect multimeter probes for anything that doesn’t need proper compensated and balanced oscilloscope probes. And if you have a radio with a BNC antenna connector then this works for makeshift wire antennas and connecting up baluns and feed lines that aren’t coax.These seem pretty solid. Have both axial and transverse banana plug holes, and the usual screw type binding posts with plastic encased metal nuts and a little (transverse, that is cross drilled) hole in the posts to help hold the wire while screwing it down. They are NOT the crappy binding posts with purely plastic nuts.Also seem solid in general. These are the lowest price I found at the time for reasonable quality (but always check prices because on Amazon especially they change constantly).I got 5 even though two would do at the moment because I always end up needing more of a particular adapter than I initially think I will need.
Chris Griffith
2025-07-10 13:58:30
With this some feed line and some speaker wire you can make a quick mobile ham radio dipole antenna on the cheap. Works well and is extremely easy to use. Run the red side to the driven element and the black side to ground and attach radials and it can be used for a fishing pole vertical mobile in place of a 1-1 balun
Minimalist Engineer
2025-06-06 10:39:35
These are perfect for adding special termination to BNC connections, when used in conjunction with a BNC-Tee.
f8ldzz
2025-05-11 18:29:06
Used mostly for automotive diagnostics, I usually use regular DMM leads with banana plug leads.This adapter allows me to use those leads with my Hantek oscope.This BNC port in the Hantek is recessed - it's tight on the twist-lock, but it's still a great value for the cost.
William Johnson
2025-05-09 10:04:40
The plugs work as advertised.
Bill
2025-04-12 13:37:03
Bought these for my SHTF radios to give me flexibility in using different antennas.
Timothy Boggs
2025-03-30 21:44:13
Works well
Rich
2025-03-22 13:12:54
Nice for measuring DC voltage off a BNC connector on outdoor microwave radios.
Lewis
2025-03-11 13:22:59
Handy for those field day dipoles.
Vincent J. Curtis
2025-02-19 10:50:26
The item arrived promptly, in good order, and worked perfectly as described, and as intended.
Graeme N.
2025-02-15 12:33:43
Was admittedly surprised by the quality. Well made of a very hard synthetic, almost like Bakelite.Well worth the few bucks for a pair. :)
Drewman902
2024-12-25 10:52:18
The material and build quality is a little on the cheap side. It'll work but it wouldn't take daily wear and tear.
VE4GKS
2024-12-03 13:13:05
Bought these for use in amateur radio antenna applications. There is only so much you can say about something this simple. They do the job properly, so they get a 5.
Recommended Products