Your cart is empty.
Your cart is empty.Product Description
A great accessory to put a second microphone where you need it The most. Acoustic players and studios will love the many different applications that the TM01 fulfills. The onstage TM01 features a c-clamp design that allows horizontal or Vertical mounting, on round or flat surfaces. Features 5/8 inch 27 threaded end.
From the Manufacturer
The clever design of the TM01 allows it to be mounted horizontally or vertically, on round or flat surfaces. The C-clamp mounting bracket quickly and securely attaches to microphone stands, cymbal stands, boom arms, and tables. Fits industry standard 5/8" - 27 thread mic clips. The removable mic clip adapter can be placed in 3 hole locations. Removable mounting block features a flat side to clamp to flat surfaces and a v-groove side to clamp to mic stands. Durable metal construction, yet lightweight for easy handling.
john soldano
2025-08-27 10:07:03
Picture shows it clamping to a camera tripod leg.Holding microphone. Works fantastic, it goes really small, to really big.
Thomas H. Desouches
2025-08-15 11:42:25
This is a simple item, but it's thoughtfully designed, well made and works as intended. I am happy to have purchased this clamp, using to mount a pair of condenser mics to the ceiling for recording the room.
Rich Bumar
2025-07-28 09:53:19
This is a nice little item. I am going to order a few more. I was going to use it to clamp my tablet holder to my mic stand (which would have worked just fine) but instead I decided to use it to mount a laser lighting effects unit to a PA speaker stand. The mic stand is 5/8" diameter and the speaker stand upright is (I believe) inch and half. It works on both of them equally well.I give it 4 stars because the bolt that tightens down to hold the threaded adapter has a plastic knob on it that will rotate when you bottom it rather than just stop turning. So you can only torque it down a little. That will be fixed by a quick trip to the hardware store. It's just a regular sized bolt and I am sure I can get one that has a knob on the end for hand tightening. If the knob/bolt combo was better, I'd give it 5 stars.
Arlin L.
2025-07-24 12:08:02
I put it on my mic stand to hold a second mic for playing ukulele or guitar. Impressive that you can move it up or down anywhere on the stand. Very versatile. Good quality as well.
Lee Ann Sullivan
2025-06-25 18:12:23
I bought this clamp to mic an acoustic guitar. I use it with a 13" goose neck. It is easy to install and remove, and the position is stable. The alternative to this clamp are really expensive, and I think this clamp does a great job. I trust it with my Shure SM81. If I were using a $2000 mic, I might buy better hardware, but I think this great for a local gigging musician or a project studio.
Tonya L
2025-06-16 14:13:31
Needed a clamp to attach the 13" mic gooseneck to a presentation stand. Easy to tighten and remove and doesn't leave a mark. Perfect addition for times when a mic is needed in this particular room.
MarkInSJC
2025-05-25 12:47:45
Mounted to my mic stand to hold my Shure wireless mic. It's universal fit, not too bulky, great quality, does the job - all at a very decent price. I really like it and would buy it again.
Customer
2025-04-12 16:09:26
It gets the job done, and has a flexible, useful design. I use it to add an OnStage Posilock telescoping boom to another mic stand, so I can position two mics on a guitar amp speaker without adding another stand. The Multi Clamp grips surprisingly well, and the multiple position threaded mount is terrific, permitting all sorts of orientations and placements. I am not impressed, however, with the handle that you use to tighten the clamp into place. It is just a bar of metal, and it can be uncomfortable to really tighten. Work gloves are not really necessary, but completely solve this issue. Still, at this price this is a real problem solver
G. P. Shedden
2025-04-04 13:30:31
Having researched this is a great detail before buying I was not expecting to be disappointed and I wasn't.We already have several wired Shure SM58's in our Band so they were the benchmark. Dead easy to setup, no interference and even keeps receiving when walking in to different rooms (did a walk test). The mic is perhaps not as pretty as the Shure but feels good to hold. The lower half unscrews to reveal the battery housing in which you'll need 2 AA's. Also in there is the pair button and a sort of gain/volume dial. On the outside and at the bottom is the on/off and mute button. If you switch it off to save battery for eg the intermission then when switching it back on again it has kept the channel link to the receiver. After a bit of setting up (shouldn't need to fiddle again) there's no feedback or distortion to mention. Not used it in earnest yet on stage so can't comment on battery life or interference with other Audio Technica's but in a studio I'm really pleased.
Robert Powell
2025-03-22 14:17:07
This little tool sure saves the need to lug around a mic stand for my hi hats..... Very secure, holds the mic right where I need it
ã‹ã‚‰ã‹ã‚‰
2025-01-25 11:56:33
パソコンã®ãƒ¢ãƒ‹ã‚¿ãƒ¼ã‚¢ãƒ¼ãƒ （40mm）ã«ãƒžã‚¤ã‚¯ç”¨ã®ã‚¢ãƒ¼ãƒ ã‚’å–り付ã‘ãŸãã¦è³¼å…¥ã—ã¾ã—ãŸã€‚・フレームã¯é‡‘属ã§ã—ã£ã‹ã‚Šã—ã¦ã„ã¾ã™ã€‚・マイクã®ã‚¢ãƒ¼ãƒ ãªã©ã‚’å–り付ã‘ã‚‹ãŸã‚ã®ãƒã‚¸éƒ¨ã¯ï¼“æ–¹å‘ã«ä»˜ã‘替ãˆã‚‹äº‹ãŒã§ãã¾ã™ã€‚注æ„点・マイクã®ã‚¢ãƒ¼ãƒ ãªã©ã‚’å–り付ã‘る為ã®ãƒã‚¸éƒ¨ã¯ãƒ•ãƒªãƒ¼ã§å›žè»¢ã™ã‚‹ã‚ˆã†ã«ãªã£ã¦ã„ã¾ã™ã€‚　ãã®ç‚ºã€æœ¬ä½“å–り付ã‘ã®éš›ã«ã€ãƒã‚¸ãŒæ¨ªå‘ããªã‚‹ã‚ˆã†ã«ã™ã‚‹ã¨ãƒžã‚¤ã‚¯ãªã©ã®é‡ã•ã§ã‚¯ãƒ«ãƒªã¨å›žè»¢ã—ã¦ã—ã¾ã†ã§ã—ょã†ã€‚　３方å‘ã¸ã®ä»˜ã‘替ãˆã¯ã‚ãã¾ã§ã‚‚ã€æœ¬ä½“ã‚’å–り付ã‘ã‚‹å ´æ‰€ã«ã‚ˆã£ã¦ãƒã‚¸ãŒä¸Šã«æ¥ã‚‹ã‚ˆã†ã«ã™ã‚‹ãŸã‚ã®ã¨å‰²ã‚Šåˆ‡ã£ãŸæ–¹ãŒè‰¯ã„ã¨æ€ã„ã¾ã™ã€‚ã¨ã«ã‹ãã“ã®ã‚³ã‚¹ãƒˆã§ã¯å分満足行ã製å“ã ã¨æ€ã„ã¾ã™ã€‚
Kindleユーザー
2025-01-12 11:47:34
マイクスタンド一本ã«ã€ã“ã®ã‚¯ãƒ©ãƒ³ãƒ—マイクホルダーã§ã‚®ã‚¿ãƒ¼ãƒžã‚¤ã‚¯ã‚’å–り付ã‘ãŸã€‚ボーカルã¨ã‚®ã‚¿ãƒ¼ãƒžã‚¤ã‚¯ãŒã‚¹ã‚¿ãƒ³ãƒ‰ä¸€æœ¬ã§æ¸ˆã‚€ã®ã§ã€å ´æ‰€ã‚’ã¨ã‚‰ãªã„ã®ã§è‰¯ã„。
MAD
2024-12-03 16:34:43
Parfait pour attacher un gooseneck sur mon rack de drum électro afin d'y installer mon petit mixer.
Recommended Products
