Your cart is empty.
Your cart is empty.Product Description
Maura Lillibridge
2025-08-30 16:55:29
GREAT Tool, great price. Took my K3500 Silverado Power Steering Pully right off in seconds. Nice, strong case, I'd buy this tool because the kit is complete, very well engineered and easy to use.
Very Nice, speedy delivery also.
2025-08-09 12:14:24
This tool worked perfectly for my use. Will work on PSC pump. Also MANY others I'm sure. Not going to use it alot. Save yourself sum monies.
TimH
2025-07-28 16:59:51
I needed a tool to remove and reinstall the pulley on my Volvo 240 series steering pump when getting a new pump.Without access to a tool like this these sweated on pulleys are almost impossible to remove or put on without damaging the pulley.This tool is not really a professional quality tool but did the job with a little help.I did not use the provided "cup" to hold the two halves of the puller as the two halves of the puller tended to slide sideways in the cup so the puller was pulling at an angle. Instead somebody who had this issue suggested using a sturdy hose clamp tightened around the two halves. That combined with careful tightening and backing off when needed kept the tool straight. In addition I carefully filed the faces of the two halves so that they were perfectly flat and could tighten together just a little more see picturesYou need a very sturdy and long wrench and a long handled socket drive (i used a long handle 1/2" torque wrench) to apply sufficient torque to get the pulley to first move at all after that it gets easier.
Mr. Smith
2025-07-25 17:24:46
This worked great to remove the old and install a new power steering pump on my 2007 Cadillac Escalade.
Glenn
2025-06-28 21:15:48
Absolutely disappointed with this product. It has already bent out of shape and never got the pulley off. This was on the very first use of this puller.
Gene Downie
2025-06-17 12:28:48
Exactly what I needed
Dmonoid
2025-06-02 14:34:08
Got the job done, but with headaches. Tool is cheaply made. Tool sleeve was too loose and kept falling off the pulley. After adding a couple layers of duct tape the sleeve was tight enough to work. If it was made with better quality, the ease of use and functionality would be better.
Krystaleena
2025-05-25 12:28:07
I used this tool on a power steering pump from a 1995 Plymouth Grand Voyager 3.8L. It worked perfectly. Pulled off the pulley to remove the old pump. Press a new pulley onto a new (remanufactured) powersteering pump. It was very easy, especially with power tools. I greased up the threads like it suggested.
Justin Wills
2025-05-23 20:09:36
Worked just as it should. I made the mistake of getting the cheapest one i could get from amazon prior to this one and it was junk but this one was really good this is a decent brand.
Customer
2025-04-23 13:52:24
Easy to use and with instructions nice case
Customer
2025-04-01 16:58:03
Works like a charm
Annie Parent
2025-03-03 12:47:45
Simple tool and easy install
frankie
2024-12-12 14:50:48
works ok but mine came with a bent bolt and had been used,
Recommended Products