Your cart is empty.
Your cart is empty.OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs. Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity. Maximum reach - 3-1/4 inches. Maximum spread - 4 inches. Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch. Upper jaw width - 1/4 inch, lower jaw width - 1/2 inch. Center screw size - 3/8-24 x 4-7/8 inches long. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.
Lawrence
2025-09-04 17:07:45
well made. a tool to last a lifetime.
Stevo!
2025-09-01 20:42:03
This was the puller that finally allowed me to remove a stuck axle from my car. Tried a 12 ton hydraulic puller from HF, and it was too big. Then I went back to get their next smallest (5 ton), which didn't do a darn thing. Finally I ordered this guy, and along with a combination of some penetrating oil, an 8# sledge, and many tears, managed to get the job done. Great tool, can withstand repeated smashings with a heavy sledge, and still works like a charm.
Marian douthit
2025-08-24 15:27:26
I bought this tool thinking it was bigger, the size got me at first. The more I used it though I found out just how versatile this little puller really is. It can fit in very tight places and grab a lot. I especially like using this tool for any stuck ball joint. I bought the 7 ton version for bigger jobs and together they make a good team. With this puller I haven’t used power tools on it and I’ve had no problems. Good tool for a good price.
Tim Long
2025-07-16 16:23:46
I used this to pull the bearings off of my Farmall Cud differential. It worked great but just. It is very small.
Edward J. Mcdonnell
2025-06-19 13:29:27
It got the old blade adapter off with ease
mullinc22
2025-06-03 14:11:43
Used to try and pull pitman arm on 2005 Dodge Ram. The teeth on the arm snapped off, I then swapped the arms around and tried again, snapped again, now it is garbage. Maybe it took more than 2 tons of force. Onto the 5 ton puller...
Timoteo
2025-04-03 12:09:51
Powerful when pulling of a hub that was splined to a Hydrostatic drive shaft. Make sure you are out of the way with a lever to avoid being hit by the object you are pulling comes off.
Dave
2025-03-27 11:51:12
A lot of pullers on the market do not list their jaw thickness and such and it is difficult to tell how large they really are until after you've spent an arm and a leg on one only to find out it won't do the job. I was trying to remove a counter gear bearing on my manual transmission which sat 2mm from another gear. Other gear pullers that I tried were just too big or too small and flimsy or had too thick of jaws to get a grasp on the bearing. This one was able to grab hold of it and pull it off. It seems solid and well built too!
Customer
2025-03-15 10:13:52
Worked great on my alternator bearings! OTC Tools are excellent tools! Recommended!
Randy Frattinger
2025-01-11 14:25:13
The puller is much smaller then expected, but made made very nice.
Customer
2024-12-01 18:17:56
Exactly what I wanted.Good product!!
Recommended Products
