Your cart is empty.
Your cart is empty.Product Description
Othmro M10 Thread 80mm/3.15" Handle Length 70mm/2.76" Screw Length Black Aluminum Alloy Adjustable Lever Handle Clamping 1pcs
Specifications:
product name：Ratchet Level Adjustable Handle
Thread Diameter: M10
Finish: Matte Black
Main material: Plated Steel
Handle Material: Zinc Alloy; Screw Material: Carbon Steel
Just lift the handle of these push button ratchet levers to disengage gear teeth and rotate freely for quick adjustment.
These handles are perfect to be used in application requiring frequent and quick adjustments and when working in confined areas.
Features:
Just lift the handle of these push button ratchet levers to disengage gear teeth and rotate freely for quick adjustment. Release the handle to reengage and tighten.
These handles are perfect to be used in application requiring frequent and quick adjustments and when working in confined areas.
Placeholder
2025-08-23 17:14:37
These were used in place of the cheap plastic knobs that came with my beach cart. Work great and should not rust and feel solid.
EN187
2025-08-15 16:04:19
used these to replace the horrible knobs on the neewer rgb 660 pro led panel lights, they work perfect and give you the adjustability and added handle length to tighten and loosen, they also fit the light case!
Ksozay
2025-08-08 18:05:33
Most people won't likely realize this tool exists, but once you do, you won't live without it.I have a number of items around the house that typically require a set of Allen wrenches/keys to adjust. And it can be a pain to deal with from time to time until I finally found these clamps.I just leave the clamp in place and whenever I need to adjust, I can, without dragging out the wrench set. It's brilliant.I'm going to add about 20 to our tool set, and still wonder if that's enough.Great tool for any house.
DBM
2025-07-27 14:48:51
This has some 'beef' to it. The handle is able to take quite a bit of pressure as well as the bolt that it controls. The finish is nicely uniform with an industrial aesthetic. The finish is far from polished, appearing like black bolts on a car engine.As the bolt was threaded through a nut, I found the thread to be quite uniform, with no difference in resistance with smooth rotation as well.If I needed to keep a spare, I would get one with a long threaded shaft since I could make it shorter by cutting the end off, shaping (grinding) it appropriately, and perhaps using a die to restore threads.
James E.
2025-07-26 15:24:45
Poor quality! All five pieces had a chunk missing on the edge (where threads should lay flat against a washer). See photo. I've bought these before so I know this isn't right. I can't believe they would even send these out.
Zev Weis
2025-07-22 14:05:25
I bought this lever to replace the stripped one on my WEN bench sander. Perfect replacement and much more solid.
Perla lizeth cortez Morales
2025-07-03 16:50:03
Fácil de instalar y buena presentación
Customer
2025-06-24 11:29:48
The media could not be loaded.
Placeholder
2025-06-09 14:46:23
These were used in place of the cheap plastic knobs that came with my beach cart. Work great and should not rust and feel solid.
EN187
2025-05-24 11:02:29
used these to replace the horrible knobs on the neewer rgb 660 pro led panel lights, they work perfect and give you the adjustability and added handle length to tighten and loosen, they also fit the light case!
Ksozay
2025-04-24 16:30:02
Most people won't likely realize this tool exists, but once you do, you won't live without it.I have a number of items around the house that typically require a set of Allen wrenches/keys to adjust. And it can be a pain to deal with from time to time until I finally found these clamps.I just leave the clamp in place and whenever I need to adjust, I can, without dragging out the wrench set. It's brilliant.I'm going to add about 20 to our tool set, and still wonder if that's enough.Great tool for any house.
DBM
2025-04-19 18:52:32
This has some 'beef' to it. The handle is able to take quite a bit of pressure as well as the bolt that it controls. The finish is nicely uniform with an industrial aesthetic. The finish is far from polished, appearing like black bolts on a car engine.As the bolt was threaded through a nut, I found the thread to be quite uniform, with no difference in resistance with smooth rotation as well.If I needed to keep a spare, I would get one with a long threaded shaft since I could make it shorter by cutting the end off, shaping (grinding) it appropriately, and perhaps using a die to restore threads.
James E.
2025-04-08 14:09:40
Poor quality! All five pieces had a chunk missing on the edge (where threads should lay flat against a washer). See photo. I've bought these before so I know this isn't right. I can't believe they would even send these out.
Zev Weis
2025-03-27 14:55:39
I bought this lever to replace the stripped one on my WEN bench sander. Perfect replacement and much more solid.
Perla lizeth cortez Morales
2025-02-12 13:50:20
Fácil de instalar y buena presentación
Customer
2025-02-04 21:17:44
The media could not be loaded.
Recommended Products