Your cart is empty.
Your cart is empty.Product Description
NineLeaf Junction Box Waterproof IP66
- Sturdy and Durable, IP66 Waterproof: Specially designed for outdoor use. It is made of durable ABS plastic and has a waterproof level of IP66. The cover interface of the waterproof box has a transparent sealing strip to ensure a better sealing effect. It is good for protection against sun exposure, dust, corrosion, and splashing water.
- 2 Colors for Choose: Grey/White
- 3 Mode of Size for Choose,More Details:
Large Model:Outer Size:7 1/8" x 4 1/2 "x 4" (181*111*100mm) ,Inner Size(Approx): 6.73"*3.94"*3.54" (172*100*90mm),
Medium Model:Outer Size: 4 7/8"* 3 1/4"* 2 1/4" (125x86x62mm), Inner Size(Approx): 4 5/8"*3"*1 1/2" (117x 76x 38mm)
Small Model:Outer Size:3 1/4" x 2 3/4" x 2 1/4" (86x74x62mm), Inner Size(Approx): 3" x 2 5/8" x 1 1/2" (76x67x38mm).
- Mounted Type: Surface Mounted
This Extension Cord Connection Box need to be used with Nineleaf Cable Glands, Please search" B077QMB3MG" "B08DR3N6XF" on Amazon to find it.
- WATERPROOF
- FIREROOF
- UV RESISTANT
- DUSTPROOF
Use Scenarios
ip66 Exterior Electrical Box Waterproof
Outdoor Electrical Junction Box Waterproof
CCTV Camera Weatherproof Junction Box
Recommended: Use electric screwdrivers and drill bits for DIY precise hole drilling to improve efficiency!!!
Step 1
Prepare an electric screwdriver and the appropriate drill bit. The drill bit has a diameter marking, so choose according to the size needed for your DIY hole drilling.
Step 2
Align the electric screwdriver with the drilling position and start it at a slow and steady speed. Keep the waterproof box stable during the drilling process to improve hole accuracy.
Step 3
Check and test the hole size to ensure it meets the requirements and that the position is correct. If the hole is for installing cable glands or other accessories, ensure they fit smoothly.
Matthew
2025-09-04 14:21:07
Its a very solid waterproof box, will do exactly what you need it for. The right color to match other boxes etc.
CLB
2025-08-31 16:54:24
This is a great little box and is well constructed and heavy duty. However, that being said, there is one thing to note. It mentions the knockouts being both 1/2 inch and 3/4 inch and gives a nice drawing of that. However, that is only for the side knockouts. The end knockouts are only 1/2 inch. I was disappointed in that because I needed the ends to be 3/4. There is however a justifiable reason for that. The screw mounts for the box are too close to the knockouts to allow for a 3/4 hole there. It just wouldn't fit. So, while I was disappointed in that feature, I understood after seeing it. Just be aware when you purchase. I would suggest that they consider moving the mounting holes enough to allow for 3/4 on the ends, if that would be possible.
Bob vO
2025-08-22 15:49:05
This plastic junction box is sold as a weather/water tight box and has a well-sealing lid; however, it is very thin-walled. The body is scored for removing "slugs" to attach gasketed connectors for passing wire into the box. The thin walls cannot stand up to "punching" out the slugs nor drilling. My box cracked and pieces broke out with each attempt, leaving gaping holes. I did not intend to use it outdoors but in my attic, so glued it back together sufficiently to use indoors. I would not use a junction box like this one, even indoors, ever again.UPDATE - Aug 19, 2022Seller offered and did replace the box. The Seller supplied some good advice on how best to open the scored holes, which is: 1) keep the lid on to maintain integrity of the box; 2) drill out the hole carefully. As you can see from the pictures, this worked out much better. Also of note, I used a Forstner bit the first time; that resulted in the wall breakage. This time, I used a small holesaw at low speed with the lid attached and with the box fully supported in my bench's end vice. I drilled holes at both ends, installed water-tight ferrules. As already said above, the box is a nice option for wire connections and now that I can easily apply the holes without breaking the walls, I've upped my rating to 4 stars.
DAVID A.
2025-07-22 17:40:19
Good kit with plenty of liquid tight connectors.
Buy it try it
2025-07-17 16:56:08
Perfect for what I needed to do
Real Consumer
2025-07-15 17:26:43
The shape of the box is nice, it seals out water nice, I’d probably buy another one of these but I did have some complaints. The plastic is thin to the point it feels fragile, it’s walls should be twice the thickness it is. The so called knockout holes were my biggest complaint. I wish they would have just left those out of the design completely because of how they did it. They don’t just knockout like anyone who has ever installed wiring before would expect them to. Even with the cover tightly installed, as recommended, you likely aren’t going to just knock those out with a screw driver. I ended up drilling my 1/2†Liquid Tight connector holes with a 7/8†hole saw, thus making the built in shaped knockout holes useless. Had they of just not attempted to put them on there at all I could have still just drilled the hole but could have put it where ever I wanted instead of being limited by the worthless indentations they made into this.As the saying goes, if you’re going to do it then do it right. The plastic of the box is too thin to feel solid/sturdy. The plastic around the knockout holes is too thick to be able to just knock them out.If you need this in a location you just need to keep your wiring connections dry but aren’t at risk of it being bumped or banged into, and you have a 7/8†hole saw or knockout punch then this will work fine for you.
SMichael
2025-07-14 12:54:36
I purchased this box to weather seal a power line pass through into an outdoor shed. It was a quick and easy install. The only challenge I had was getting the connector from the conduit I used to screw into one of the punch-outs. It took a minute to get the threads to catch evenly. Finished, it looks clean and unobtrusive. Very satisfied.
J. Abshire
2025-06-26 17:21:15
I bought these for junction boxes for my landscape lighting working great with for 12 gauge wires coming in with wire nuts plenty of space inside. Are use the 20 mm glands and had no problem with fit. I did notice a little bit of moisture inside after a hard rain, this is probably because there is no gasket that runs around the outside of the lid. I won’t be submerging this so I’ll drill a little hole in the drain section of the lower box to accommodate any moisture gets in there, overall pretty good box for the price!
Muchsin Mohdar
2025-01-30 18:53:29
Excellent
Rick
2025-01-19 16:52:42
Box itself looks reasonable. Not sure on the IP rating as theres no gasket on lid. That aside its solid. I would say though that if you have to use a hole saw to remove the knockout holes.. maybe its not so much of a knockout. OTherwise good. I used it for camera install with POE and conduit.
Steve
2025-01-14 12:18:34
perfect for connecting cables outdoors and were delivered promptly.
N. B.
2025-01-06 10:53:28
Der Artikel ist Super, saubere Verarbeitung. Es fehlte eine Kabeldurchführung, deswegen nur 4 Sterne.
Recommended Products