Your cart is empty.
Your cart is empty.Product Description
Features of the 60926 respirator flter
- Rotating bayonet design makes the connection between the interface and the main body more solid.
- Swept-back design makes the view wider and more comfortable.
- Ergonomic design: large trapezoidal design, the center of gravity shifts back to relieve neck fatigue.
Package Includes
- 2 x 60926 Respirator Cartridges
Note:
- The product cannot produce oxygen, please donot use when the oxygen concentration is lower than19.5%.
- Shelf life under sealed condition: 5 years.
Respirator Cartridge/Filter 60926
Compatibility
This 60926 respirator cartridge is used with 6000, 7000 and FF-400 series respirator masks and can not be used alone. Please make sure this is the model you need before placing your order.
Efficient Filtration
- The respirator cartridge consists of activated carbon and electrostatic filter cotton with a very high content of activated carbon, strong adsorption and a filtration efficiency of 99.97%.
- The 60926 respirator cartridge can be used to filter certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, orhydrogen fluoride, and non-oil and oil particulates.
Widely Used
The respirator filter is properly installed on the respirator mask and can be widely used in cleaning, sanding, painting, agricultural applications, construction work, petrochemicals, graffiti, pharmaceuticals, metal smelting, torch cutting and welding and other work areas.
WN
2025-08-10 11:53:53
Used these while painting with Total Boat Topside and did not smell anything. Not a fan of how the attach to my 3M mask but the function well.
VTdude
2025-07-05 21:50:40
Fit the full face masks of various manufacturers. Currently using them for two part urethane. Work as well as any tried.
bmills
2025-07-03 18:45:25
how do you filters work great on organic vapors, as with the epoxy resin.
Billy Bob Jr
2025-06-24 11:56:13
This package and several others ( shirts, pants, socks ) a Strong Chemical Smell in the product and packaging itself. It was very sickening we both felt ill after opening. Please look into this
Don Pieronek
2025-06-09 10:54:46
I am old school and spray a lot of lacquer, where a filter is clearly needed. Worked fine when spraying with an old HVLP gun.
Patti M
2025-05-06 12:30:58
Easy to install. Used for staining wood, couldn't smell anything. Great price, too!
Your Buddy Chuck
2025-01-18 18:27:25
We had a structural fire in our neighborhood just a few weeks ago. The smoke was really noxious. I bought these filters to have on hand in case this happens again or we have another intense wildfire smoke incident. My understanding is that these filters are supposed to filter certain organic vapors as well as particulates. They are intended to be used with the 3M mask.
SecretDevilYT
2025-01-11 15:42:07
I would recommend changing these filters after each session of doing a full set of dip nails. The filters do absorb the fumes but once they become full they will no longer protect you. If you smell the fumes through the filter, it is too late. It is better to change them more frequently than to try and get your most amount of time out of them. They do work while they are still effective.
Recommended Products