Your cart is empty.
Your cart is empty.Product Description
Please pay attention to Gapless connector to dc female head the positive and negative poles (the positive pole to the positive pole can be connected successfully)
The white wire is the positive pole and the black wire is the negative pole
COB connectors(8mm)
Specification
- - Compatible strip light type: 0.39inch (8mm) COB LED strip light
- - Wire length of PCB board to board jumpers: 6.7 inches
- - Wire length of PCB board to DC Female Head connector : 7.9 inches
Package Includes:
- 4 x Middle connectors
- 4 x PCB Board to board jumpers
- 1 x PCB Board to DC Female connector
- 2 x L-shaped/corner connectors
- 1 x T-shaped connector
The led strip connector kit provides some of the accessories required for your LED strips
The gapless led connector helps connect two single color flexible LED tape light and strip segments without soldering.
LED jumper connector is used for connecting led strip segments around the corner.
DC connector use 8mm strips ，Works with dimmable strip lights.
Internal Width: 8 mm
Cut the mark
Please cut the light strip along the middle of the copper sheet
Peel off the glue
Note that when removing the tape, tear off the outermost layer of the tape
Insert connector
Please note that the positive and negative poles of the COB strips at both ends of the connector must be the same
Close the cap
Please note that the positive and negative poles of the COB strips at both ends of the connector must be the same
Mike
2025-09-02 13:38:15
2nd ReviewPautix contacted me about my issue (see 1st review below) and provided customer service one rarely sees today. They went above and beyond and exceeded my expectations. They were thorough and timely in their responses. They even sent me an entire new set with diagrams on how to install. They sent me an updated design of the 'L' connectors which solved my problem. There was no heat being generated anymore and the lights work perfectly. Generally speaking, I prefer COB above LED as COB is a cleaner look, it looks like a solid bar of light as opposed to seeing the individual diodes on LED strips. HIGHLY recommend Pautix, not only for great products but for their spectacular customer service and taking care of consumers. I'd give more than 5 stars if it were possible.1st ReviewSo I installed COB lights on the back of my 75 inch. Lights (by the same company: Pautix) look great honestly. Really pleased with the overall look. I used 3 of the 'L' connectors. 2 of the 3 are fine, generates no heat. Odd thing is, of the 1 'L' connector that is generating heat, it's only on 1 side and it is BURNING hot, to the point, it's painful to touch. Given the set came with 4 'L' connectors, I decided to swap it out with another 'L' connector to see if the problem persists and it STILL generates a ton of heat. It's a bit concerning cause I think it's gonna burn up or cause a fire. Too bad, b/c I think for the most part it's a great products, just can't seem to understand why 1 side of 1 'L' connector generates a ton of heat.
Anthony Rankin
2025-08-16 14:25:42
Made rewiring my cab clearance lights on my pickup. Muck easier than cutting and splicing a bunch of wires
S James Muller
2025-08-04 12:54:48
Everything you need to build and install LED tape lighting system.
Carol Birtzer
2025-06-21 15:55:53
These do work well, but the first one I tried didn't work. Checked with a voltmeter and had 9 volts up to the connector. but not on the lights.Simple Tips:-Watch the video and note the direction of the black and red wires to the light stripe with the yellow side up. Not sure it makes a difference (positive and neutral sides to stripe???) but once I placed the black on the left side of the light stripe looking down with the black and red wires further from you than the light stripe and have the yellow side of light stripe up. Video is easier to see what I mean. They worked every time.-Cut the light stripe so that you leave more copper tab length on the end. In other words, don't cut in the center but a little off-center to leave a little more copper tab length on the light stripe you are using. This gives more area for the crimp to contact.-Install the crimp connector with the metal crimps facing up, or the same side as the yellow light stripe.-My light stripe did not slide in as easily as in the video. So when you peel back the adhesive cover, I then rubbed some adhesive off on the tip with my fingers and a light alcohol wipe so that it would slide into the connector without the adhesive preventing it from sliding in.-Last I covered the connector with electrical tape to prevent shorting of the 2 metal crimps that are still exposed after you pinch (crimp) them down with plyers. Unlikely but mine was under a kitchen cabinet and water could short it out if the connector gets wet.
GARY CLARK
2025-04-11 16:44:14
Easier to use than the other ones I bought.Much better connection than the other ones.Works the first time.if you don’t mind the wires in between these are the best! Much more “solid “and better than what i bought before.Cheaper too!It took 3 tries to get the right ones but i finally did.Would buy again!
Mert
2025-02-02 14:36:57
Works good for couple hours or days but its not working well after time. Cob leds are very hot and this connector can't handle. Find something else
Customer777
2024-12-07 13:16:44
I used these with the spools of PAUTIX COB led strips to add lights to my closet shelves. Needed to run wire in-between shelves and these worked great to connect them with 22 gauge hookup wire. I recommend taking the time to look into where the teeth bite into the led strip and ensure they land right on a copper pad before crimping them- that'll make sure they'll connect well electrically. They grab the wire and the led strip pretty well, I'm satisfied with them.
wilson
2024-11-28 18:09:45
The packaging is not very good, easy to lose
Recommended Products
$10.32
$ 4 .99 $4.99