Shopping Cart

Your cart is empty.

Your cart is empty.

PCIE SATA 10 Ports Card PCIE to SATA 3.0 6Gbps SATA Controller PCI Express Expansion Card with 10 SATA Cable Compatible with WIN8 / WIN10 / Ubuntu

4.3 (13) Write Review
Free shipping on orders over $29.99

$44.99

$ 22 .99 $22.99

In Stock

1.Color:Pce 10st


About this item

  • PCIE X1 INTERFACE: This 10 port SATA expansion card is compatible with PCIE X1, X4, X8, X16, not compatible with PCI slots
  • POWERFUL CHIP: Integrated ASM1166 and JMB575 chips, the stability and compatibility of this PCIe to SATA card have been improved; This PCIe SATA card does not support hardware RAID
  • CAMPATIBILITY: Supports Windows 8/10/MAC/NAS/Ubuntu not recommended for Win 7 use, may be blocked With the YBBOTT 10 port PCIE SATA card, you can add 10 SATA III 6Gb/s drives for your desktop; Lenovo and Dell computers block the BIOS interface of any third party SATA controller, unpredictable compatibility problems may occur or the SATA card cannot be read
  • 10 PORT SATA CARD: With the 10 port SATA PCIe card, you can add 10 SATA III 6Gb/s drives for your desktop; Lenovo and Dell computers block the BIOS interface of any third party SATA controller, unpredictable compatibility problems may occur or the SATA card cannot be read
  • SPECIFICATION: Compliant with PCI Express v2.0 specification and backward compatible with PCI Express v1.0. If higher speed is required, the motherboard must be PCIe 2.0 or higher; Insert a 10 port SATA PCIe card into the x16 slot; The actual speed depends on the PCIe bandwidth of the motherboard; If all ports are used at the same time, the speed will slow down


System Requirements:

Applicable Slots: PCIExpress X1, can be used on PCIe slots X4 / X8 / X16

System: Support for Windows 8/10 32/64 bit / MAC 10.14 / NAS / Linux

Not recommended for use with Win 7, may be blocked

-Multiple hard drives require sufficient power to prevent "drop channels" "not working" and so on

-Using multiple operating systems supports only Windows

-You must turn off the power before connecting the SATA PCIe card to the motherboard or remove it

-The PCIe X1 10 port SATA 3.0 PCIe controller card provides a simple connection between a host computer and SATA 3.0 devices (SATA hard drive or SATA device), enabling 10 SATA devices at speeds up to 6 Gbps

Product Features:

Chipset: Asmedia ASM1166 and JMB5XX

Supports 10 SATA 3.0 6 Gbps devices

Complies with PCIExpress v2.0, v3.0 specification, backward compatible with PCIe1.0; Complies with Serial ATA 3.0 specification, backward compatible with Serial ATA2.0, Serial ATA1.0

Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps

Supports FIS based port multiplier and Plug and play command based switching, supports Hot Plug and Hot Swap

Package Contents:

10 x SATA cables

1 x PCIe X1 to 10 SATA 3.0 controller card

1 x Low profile bracket

1 x SATA splitter adapter cables


M. Dillon
2025-08-22 12:18:46
Works just fine on linux (Fedora) without needing drivers or config. I'm running 13 HDD in a ZFS software raid without issues.
Alfred Arnold
2025-08-10 14:39:13
Fired up with no difficulty. Expanded my hard drive capacity with ease. Recommended.
J F Seattle
2025-07-28 18:58:14
This 8 port SATA expansion PCIE card from Ybbott works great. The broadly supported ASM1064 chipset worked fine with my Ubuntu system. I don't quite have use for all 8 ports just yet, but I have options. This kit includes the card, outfitted with a full height PCIE slot cover. The Ybbott 8 port kit also provide a half-height slot cover, a 1 to 4 SATA Power splitter, and 8 SATA cables (latching, linear). A small CD driver disc is provided and it appears to have been created in mid 2023 for many different products from SATA controllers to USB add-on cards. I did notice none of the drivers provided appear to support windows 7 or 11 (also not appearing on the product listing) should you need to calibrate your expectations. That could be because many of the driver files seem to be from around 2020 or earlier.I added the card to my Ubuntu system with a few smaller (120-256 GB) SSDs and had transfer speeds around 200 MB/s. Some slowdown is to be expected from small SSDs but I expected a bit faster. It's possible this expansion card is more suited for mechanical hard drive use. I noticed the 8 activity LEDs lit only when a drive was connected and blinked indicating which of the 8 ports were actively transferring data. The heatsink is in contact with the most important chips on the card but it didn't even feel warm (or might require prolonged transfers). That is a big contrast to my SAS2008 HBA card which pretty much needs some active cooling on the heatsink.I was initially a little concerned about how little solder was visible in the vias for the SATA ports but every port worked just fine when I tested them so things worked out. The only other negative might be including a mini CD for drivers in 2025 and it being sort of odd to have only one SATA power expansion cable (supporting 4 drives) but 8 SATA data cables/ports.
AZ Kid
2025-07-01 16:58:34
I used this in my HP Pavilion desktop to add another SATA disk drive. It was plug and play, no driver required (although one was provided).
magicmoose
2025-06-14 18:45:55
I always worry that cheaper SATA controller cards will cause system corruption and so far this card is working decently. The card I received has only two SATA ports and they work to connect two more drives to a system that lacks more SATA ports natively. Highly recommend this!
Grumpy Spud
2025-06-10 17:29:43
If you’ve ever felt like your computer was missing that special something, like a ton of hard drives, then look no further! The PCIE SATA 10 Ports Card is here to save the day, and possibly your sanity.First off, let’s talk about the sheer number of ports. Ten. That’s right, ten! It’s like the card is saying, “Why stop at one or two when you can have a whole party?” I mean, who needs that many hard drives? Are you secretly running a data center out of your basement? No judgment here, just pure admiration.Installation was a breeze. Well, if by “breeze” you mean a hurricane of cables and a minor existential crisis about whether you really need this many SATA ports. But once you get past that, it’s smooth sailing. Just make sure you have a map handy to navigate the labyrinth of cables.Performance-wise, this card is a sloth. It’s like strapping glue to your data transfer speeds. Your files will be flying around faster than you can read aloud War and Peace. Just be prepared for your computer to start demanding more snacks to keep up with the workload.Compatibility? Oh, it’s got that covered. Windows 8, Windows 10, Ubuntu - it’s like the card is a social butterfly, mingling with all the operating systems at the party. Just don’t invite Windows XP; it’s still stuck in the early 2000s and doesn’t know how to handle all this modern technology.In conclusion, if you’re looking to turn your computer into a hard drive hoarder’s paradise, the PCIE SATA 10 Ports Card is your new best friend. Just be prepared for your computer to start asking for a raise - it’s going to be working overtime!
Kyle
2025-06-04 12:39:32
This SATA 3.0 Controller Expansion Card is a fantastic solution for adding a bunch of extra SATA ports to your computer. I was able to easily install it in a PCIe x1 slot on my motherboard, and it was instantly recognized by Windows 11 without needing to install any drivers. The 8 additional ports provide ample connectivity for hard drives, SSDs, or optical drives. It's a great way to expand your storage capacity or add more devices to your system.
Kairi
2025-04-12 14:44:01
Works for older systems with fewer SATAslots but is non bootable .
Q.L.
2025-04-06 14:55:22
Esta tarjeta de expansión SATA III con 2 puertos SATA para conectar en zócalo PCI-Express, llegó bien protegida, con una placa extra para cajas de perfil bajo.La construcción tiene muy buena pinta. Pone que es compatible con Windows y Linux, yo la he puesto en un PC con Windows 11, no he necesitado drivers ("plug and play"), aún así trae un mini CD con los drivers necesarios.He realizado un test con el software CrystalDiskMark, que nos mide la velocidad de lectura y escritura de una unidad de disco duro. Testeado el mismo disco HDD, conectado primero a la placa base directamente, y después conectado a la tarjeta, el resultado son unas velocidades totalmente iguales.Por tanto, creo que es una buena compra, si necesitamos añadir discos a nuestro equipo y no nos quedan puertos libres.
NeZ
2025-03-29 17:51:17
オンボードのSATA以上にHDD/SSDなどを積みたい場合に便利なカードです。純粋なSATAのI/Fですので、BOOTが出来たりRAIDが組めたりといった機能は当然ありません。（RAIDが欲しい場合はソフトRAIDを使うか、ハードウェアのRAIDカードを買いましょう）PCIeがGen3 x1ですので、コントローラの処理能力を抜きにしてもソコが速度の限界です。つまり、HDDやSSDを6発フル満載で同時にフル稼働させた場合は本来の速度は出ませんのでその様な使い方をされる方は別の物を選んだ方が良いでしょう。
Georges
2025-02-22 12:33:11
J'ai mis 7 disques et ca fonctionne bien.RAS pour le moment.Le prix est bon par rapport a d'autres offre amazon.+1
Wylli
2025-02-18 10:23:43
Ottimo
カス夕マー
2025-02-11 10:05:36
６ポートがかなり使い勝手が良いです。SSDも容量が少ない昔のものが余っていると思いますのでこちらで増設して活用しましょう。MLCの128GBなんて余っていたら一時ファイル置き場に良いです