Your cart is empty.
Your cart is empty.
Pegboard mounting kit, includes screws, spacers and washers for 1/8 inch and 1/4 inch pegboard
Features:
Easy to use:
The accessories required to mount a pegboard to the wall is included in one package, can be applied to mount pegboard on wood stud, hollow and concrete walls.
Suitable for most pegboards:
The pegboard mounting kit is applicable to most standard sizes of pegboards, including 1/4 inch and 1/8 inch pegboard (thickness not exceeding 1/4 inch).
Specification:
Material: steel and rubber
Color: as pictures shown
Size: as pictures shown
Package includes:
24 x Screws
24 x Spacers
24 x Washers
Note:
Please allow a little error on the size due to manual measurement.
Please check the size carefully before purchasing.
BB
2025-07-31 17:43:14
These spacers worked out perfectly for the Nerf wall in my boys' room. Only one screw head was defective, but we had more than enough to complete the job.
K. S. T.
2025-07-21 19:08:32
This kit was sufficient for hanging up two large pegboards in my garage. Install was simple. Highly recommend.
Kyle Kniepkamp
2025-06-02 16:39:23
Spaced my pegboard nicely from the wall.
Lucy
2025-05-12 11:19:03
Be careful with the screws, they are a little weak - I rounded off a couple of screws and broke one head off. The hard part is keep screws and spacers in place as you mount the board. I ended up using masking tape to keep the spacers attached to the board. But the end result was great.
Steve C
2025-03-13 14:19:38
These were perfect. Shipped fast and had everything I needed.
Andreas Herczeg
2025-03-08 18:17:49
While this set did the trick of mounting the set of peg boards I bought in my garage, the quality of the Philips screws that it came with were abysmal. Not only did most of the screws strip, but a handful of the screws’ head completely broke off when tightening.
Sniffles
2025-02-26 11:59:59
I really do try to buy local but then I go and can't bring myself to pay $1.19 per spacer. So value for the money? Spot on. I also couldn't buy all the spacers I needed in the size I needed so I had to mix and match, this solved that problem. Screws are screws, they didn't bench so I'm good. I usually over install for weight compensation since I'm in a plaster and drywall situation with slats I sometimes go through and studs sometimes showing up at non-standard spaces (old houses are gems), and this let me go nuts. I have two pegboards in a room corner and I was able to install these around cabinets. My walls are irritating. This package is not. You'll be happy with the quality and durability.
Chris
2025-02-24 19:59:22
The standoffs make it easy to place hangers without scratching the wall behind. The screws are long enough to pass through drywall and imbed in studs.
Smith comma John
2025-01-21 13:33:03
Didn't expect anything to go wrong with screws, spacers, and washers but here we are. I had 4 heads out of 30 come off when screwing into a stud. Also a few different bits didn't stay in the heads and ended up stripping.
Recommended Products
