Your cart is empty.
Your cart is empty.Will D
2025-09-04 10:44:12
So... they took away your trusty ACH and issued you helmet for LARPing for airsoft because you're not "special" enough to justify supplying a legit Ops-Core helmet with real peltors. So now you and your meager salary have to figure out if this is what you need to mount your Walker Razors to your high cut helmet. The answer is... kinda. I rated this 5 stars because if you had the peltors that it's designed for then i believe it would work perfectly and easily. Your razors or howard leights (i tried both) will likely be more complicated and require some modification as you can see in my photos. These mounting arms are solid construction and easily attachbto arc rails and swing 360â° for storage. The fitment is tight and makes your whole helmet feel more stable and secure.
Carol Weldt
2025-08-31 13:35:24
works perfect, easy install
Nathanael
2025-08-27 17:05:59
I'm using these to mount some budget ear pro on my helmet. They work very well. These mounts keep the ear pro out of the way for quickly removing and/or mounting the helmet. When snapped into place over your ears, they push the muffs close to form a great protective seal around your ears.I've used this helmet in several range trips and in an active firearms class and haven't noticed any degradation in performance or rigidity.Look forward to using these for years to come.
Nick
2025-08-20 16:47:26
I was issued ( an upgrade?) To a safariland (TCI) headset and hangers with our new helmets from my old reliable under the helmet peltor comtac. The new headset was awful but that was besides the point of this review. The TCI hangers would not stay secure from the helmet to your ears without modification. I watch a video from flannel daddy garand thumb on yt, who recommended these hangers, and they work great.I switched back to my reliable comtac headset with these helmet hangers and they work like the tci's wished...and at half the price, weight, and size. They stay on my ears when i want them to and click off for circulation or doffing my helmet when i want them to.They appear as if they will also work with other peltor, HL, or walker head sets, without permanent modification, but i havent tested it.Be careful bc there are a bunch of airsoft knockoffs on amazon, but these were authentic and worth it. I recomend.
J
2025-08-15 11:55:46
So as far as arc rail attachments don't bother with any others. Yes the cheap ones look identical, but trust me they aren't the same quality. These are tough and do exactly what they're designed to do, and they do it well.Now the negative. That peltor attachment is proprietary. That means that you're stuck with earpro that is either insanely expensive or total garbage. When I bought these I bought a set of peltor 100s. Compared to the (cheaper walkers) the 100s suck! Now I probably could have paid 2-6 hundred to get the high quality peltor com-tacs, but I'm gonna level with you I need these for airsoft and I don't run comms.However fret not, because you can just pull the peltor attachment points off and replace them with the attachment points that come on your walkers and you're good!
Mr. Nobody
2025-08-09 17:23:31
I paired the adapters with some older walkers. I was unable to use the attachments from the adapters, however I did use the factory adapters for the walkers. Everything works as it should. Snug fit on the arc rails and the adapters fold up and down. A little loud, but as I keep using them the pop isn't as bad. Great product overall.
Brandon W.
2025-07-05 14:36:46
Snug perfect fit.
ivan.ayala
2025-06-20 17:04:10
Bought these to adapt a set of Peltor Range Guard ear pro to my helmet. Pretty easy. Just cut the head band pad to release the cable and unclip the cups and remove the retaining clips. Installation is straight forward. The ARC rail adapters are tight so it will take some elbow grease to get them on but once on they will not move. Install the clips with the range guards a clip in the cups. Done! Two settings allow you to pull the cups away from your face and rotate them out of the way. Second position applys pressure to the face to create a seal. If you plan to use a set of range guards you can't use the clips that come with the Peltor ARC adaptors but the ones that came with the Range Guards work perfectly. Great product but I will admit they are a little high in price for what they are. That being said, I suggest getting these and foregoing any knock offs.
Philip
2025-04-04 14:30:02
Amazing product, fits perfectly and they hold the earcups tight to the ear. The clip on/off feature is perfect for drying the ear when not firing. You totally get what you pay for! Had eararmor ones and they wouldnt even go high enough to close on my ears. Very glad I went with the real thing!
Awesome
2025-04-01 12:59:48
Great
Dylan S.
2025-03-27 16:08:18
Glad I spent the money on the real thing. Don't waste your time and money on the cheap knock offs! Get the real thing and you won't regret it!
luke
2025-03-26 11:03:10
I have zero complaints with these adaptors used them with Howard Leights for an 18 hour milsim and they held up just fine.They are very hard to install but do not move at all on my helmet(airsoft helmet). I wouldn't cheap out just get these ones they work great.
Kurt
2025-02-17 14:37:29
Product works as advertised.
Recommended Products
