Your cart is empty.
Your cart is empty. PENN-PLAX presents the Cascade 1000 Canister Filter.
Without effort, the Cascade 1000 Canister Filter quietly delivers crystal clear water throughout the tank.
This filter cycles water at 265 Gallons per Hour,
and is recommended for aquariums up to 100 gallons.
It’s compatible for both freshwater and saltwater fish tanks,
and is also great for turtle habitats!
State of the Art Features:
In addition to the push button primer that allows for a simple and quick prime,
this Canister Filter also features two independent valve taps that rotate 360°.
This makes for easy maneuvering, even in the tightest aquarium cabinets!
The 3 stackable, large capacity media baskets give aquarists the ability to customize filtration,
and include built-in handles for utmost convenience.
Furthermore, the included spray bar helps aerate your aquarium
by evenly distributing filtered water over the surface.
Filter Media:
This Canister Filter comes standard with
3 Poly Fiber Floss Pads, 1 Coarse Bio-Sponge, and 1 Bag of Activated Carbon.
In addition to optimizing the colonization of anaerobic bacteria,
this filter traps floating particulate matter, removes harmful chemicals and toxins,
clears up discolorations, and reduces foul odors from your aquarium’s water.
Items Included:
2 Independent Valve Taps, Push Button Primer
Flow Rate Control Cut-Off Valves
Swimming-Pool Style Hose Clamps
4 Easy Lift Alignment Clamps
Sturdy Tip-Proof Base
3 Large Capacity Media Baskets
3 Poly Fiber Floss Pads
1 Coarse Bio-Sponge
1 Bag of Activated Carbon
Measurements and Other Useful Info:
The Cascade 1000 Canister Filter measures 11.5” (W) x 10” (D) x 17” (H)
Additional Info = 110 Volts / 60 Hz / 28.5 W.
Sandy Beach
2025-07-31 10:18:08
I have waited about a year after purchasing this to write a review and I am glad that I did. When I first purchased this filter and set it up, I would have given it a 3 star rating due to my own faults. Now that I have cleaned it out and set it back up several times, I absolutely LOVE this filter.1st it does not need to be manually primed (eeeww) like some other filters out there, which was the main reason I purchased it.2nd it purrs like a kitten. This filter is VERY quiet, I don't hear it running until I open the stand door and even then I have to listen for it.3rd It keeps my water crystal clear (which has more to do with the media than the filter, but more on that later)4th I have had no issues with this filter in the year that I have had it.When I first got this filter and tried to prime it, it didn't fill up right away. It was a pain in the butt. I followed the instructions and I just couldn't get it to work. I almost considered returning it. Other reviews said the same thing. Since then, I have learned a much easier way to get it to run. After I clean it out and put it back together, and all the hoses are connected, I plug the filter in and turn on the valve for the intake hose only. Then I push the prime button 4 to 8 times until I hear the water filling up in the canister at which time I turn the valve for the outtake hose ON. This filter will start filling up on its own and running smoothly immediately. It is so easy.I have been playing around with the types of media I use in this filter and how I pack it. I use this filter in a 55 gallon aquarium for a AST (American snapping turtle) who is a very dirty guy. My aquarium is only half full of water so probably about 25 to 30 gallons of water. I have left over ceramic rings, and instead of tossing them I put a VERY thin layer on the bottom of the canister BEFORE I put the trays in. This keeps most of the muck on the bottom while the cleaner water moves up. I pack the bottom tray with 3 different sponges (coarse, medium and fine on top) the middle try is where I put my coarse media, I found that Matrix Bio Media works better than the white ceramic rings as it is more porous, where the ceramic rings are smooth and don't help keep the water clea. In the top tray I use a mix of Marineland Diamond Blend Ammonia Neutralizing Carbon and Black Diamond Premium Activated Carbon, I also add a cuttel bone to the top tray for added calcium in the water. So far this has worked great for me along with the filter, my turtle tank is crystal clear and I clean it out about once a month.Hope this helps anyone considering purchasing this filter. It is a great price and works great. I would purchase this again in the future.
AKing
2025-05-12 14:40:03
The media could not be loaded.
Matt
2025-05-03 14:52:24
This thing cleared up my turtle tank that was previously using a simple HOB filter in no time, and for the past few months has kept it sparkly clean. Only just last week did I notice some algae building up in the filter, I took it apart in minutes, cleaned it no problem, and had it back set up, all within 30 minutes. Super easy to work with and does an incredible job. And at a much lower price than some bigger brands. Absolutely phenomenal filter.
Melissa
2025-04-21 14:21:53
Powerful
chetan
2025-03-05 11:38:38
ðŸ‘
Dave
2025-02-27 12:48:23
I bought this as a backup filter had another and liked it today I try to install this one. The impeller making this crazy noise and no success getting in going. The first one was good ðŸ‘. What's going on with the new ones
Customer
2025-01-18 16:07:47
For some reason did not notice this was a US product with US voltage. Managed to blow fuses! I know this is a very good product but need to be compatible.
Recommended Products
