Your cart is empty.
Your cart is empty.Product Description
High output 3014 LED chip
The 3014 LED chips this bulb use is a high brightness model, low thermal resistance and light degradation, small size but high bightness (up to 13-14LM per chip), it delivers high efficacy and high flux density from a uniform source with tight correlated color temperature control.
Phinlion 3157 4157 LED Amber Bulb
The Phinlion 72-SMD 3157 amber LED bulb uses constant current IC technology and 72 pieces high power 3014 LED chips, it generates less heat but brighter light compared to other bulbs use normal LEDs and has advantages of high brightness, non-polarity, compatible for both standard 3157 and CK/SRCK socket, wide operating voltage, low temperature, low power consumption and long lifespan.
Optional Colors: 6000K xenon white / Amber Yellow / Red
- High output LEDs
- Superior quality
- Non-polarity
- Constant current IC
- Wide operating voltage
- Compatible with CK/SRCK socket
Constant Current IC
Wide operating voltage technology makes the bulb more reliable and stable when used on vehicles that have voltage fluctuations, compatible for both CK and standard 3157 socket
360° Lighting Angle
Intense and vibrant amber, 60 LEDs on the side and 12 on the top, 360 degree lighting angle, nice and uniform light
Super Bright
1000 lumens per bulb, much brighter than oem 3157 3156 halogen lamp, makes your vehicle more visible to other drivers
How to find correct bulb size for your vehicle?
- The most recommended way: Check your vehicle user manual or original bulb's part number to see if the part number is the same as the cross reference number listed above
- Check Amazon fitment system on product page where it says "amazonconfirmedfit | Make sure this fits", enter your car Make, Model and Year and see "Note" to comfirm the position these bulbs would fit. (Amazon fitment system may not be 100% accurate)
And
2025-09-02 11:12:53
If you have an older vehicle, you might need to change the blinker relay, because the wattage is so low that the relay things the bulb is blown.I had this problem on my 1993 ford E350. I got a new relay from napa for 30$ and it works great.
Anthony spelts
2025-07-08 17:35:50
Perfect replacement for my front marker lights on my 05 Silverado. Direct replacement, nice and bright
Jonathan Park
2025-06-29 13:32:52
The 3757A/NA bulb is designed with a small change in the side tab to prevent installation of a non-amber 3157, so most aftermarket 3157 LEDs won't fit in a 3757 socket. These do. Their tabs are JUST narrow enough to clear the socket openings, and they fit solidly in my 2020 Explorer Limited's rear turn signal sockets.I used FORSCAN to stop the instrument cluster fast-flash, which is the only hyperflash you'll see on newer Fords...the exterior lights still flash normally, so you may not even feel the need to fix it. But if you have FORSCAN, you can change the BCM code 726-44-02 (2020 Explorer only) so that the second digit of the code content (x*xx xxxx xx) is a ZERO. Other Fords have different codes...don't change these unless you're sure you have the right codes for your car/truck.Also, Ford uses PWM to pulse the rear turn signals in low-light conditions, so that they're slightly less blinding. Some other LEDs don't like PWM on the on-cycle, where you'll see rapid/violent flickering instead of solid-on. These bulbs are solid-on.As for the brightness, they're just a bit brighter than the standard incandescent bulbs, and a deeper amber color than some of the other LEDs I've seen. I'd say 25-33% brighter than stock.I'm not sure how warm they'd get with the parking-lamp (low) connection running continuously, since my rear turn signals are flash-only and I didn't have a chance to test that (the 2020 Explorer's front turn signals are LED).VERY happy with these bulbs so far. The instant on-off and the higher brightness are big improvements.PROS:- solid-on, even with pulsed (PWM) input- deep amber color, really noticeably better than some other yellow/amber LEDs- slightly brighter than OEM bulbs, but only by about 25-33%, I didn't have time to grab a side-by-side video- fits 3757 sockets with no modifications- top-mounted LEDs light up nicely for direct rear-facing illumination- LEDs don't seem overdriven, so no parts of the "bulb" get even warm in turn-signal-only use- no polarity issuesCONS:- they'll probably hyperflash in most installations, but luckily, most Fords can be fixed without resistors- they're not insanely bright- they're slightly tall, so they may not fit and/or they may change the beam spreadNone of these cons were deal-breakers for me. I'll update if something changes.
R. Griffin
2025-05-24 11:07:07
Works for my 2008 F150 Lariat 4x4. I will say that the signal lights are blinking faster but I am fine with that. Hope they last a long time
Frank Montijo
2025-05-20 12:28:14
They work very well really bright and you need resistors
Gregg
2025-03-09 18:01:25
Bright lights but may not draw enough amps for OEM flasher units.
Dad Doing Stuff
2025-03-04 14:41:37
Installed on a 2016 Toyota Tundra as the front turn signal bulbs.This bulb is bright and plugs in great, no issues there. However, the bulb does not provide the needed resistance like a stock bulb. When it is being used as a turn signal, this is very problematic. The resistance on the circuit needs to be a certain level in order for the flasher to flash at the appropriate interval. These bulbs don't provide the needed resistance and the result is that your blinkers will flash at about 2-3x their normal speed. This is the same speed that they will flash when a bulb is burnt out entirely (which is one of the best indicators that your turn signal bulb is out). So while these are bright, look cool, and were definitely plug-n-play, they should not be used as a turn signal bulb.
Sky
2025-01-30 16:29:57
Lights are bright as expected for LED. They fit the housing for my Tacoma. The yellow coloring of the base is more prominent than I would like. These definitely cause hyperflash. I had to order another $20 part to fix that. I would have rather spent more on LEDs that wouldn't cause hyperflash.
Chris Latiff
2025-01-08 17:13:48
Easy peasy install and nice and bright
Kevin Atkinson
2025-01-03 15:39:34
Great product and easy change out.
Dave
2025-01-02 14:34:11
My turn signals now blink at a faster rate. Not the end of the world but would prefer if they would blink at a slower rate.
Rick Friedt
2024-12-18 18:08:11
easy to install,nice and bright...
Paul S
2024-12-02 10:15:26
The colour is amber and they are fairly bright. I would buy them again.
Recommended Products