Your cart is empty.
Your cart is empty.Product Description
Specially designed, phone cap
Specific design
Unlike other camera covers, this one is designed for user privacy, providing privacy protection
while protecting the camera from wear and tear without affecting the appearance and operation of the device.
The best protection is prevention
Mobile phones have become a necessity in life, in the process of using it, it gradually has a very deep understanding of our environment.
If this balance is broken, our privacy will be exposed on the Internet without reservation. So cover the camera when not in use is the best protection.
Compatible for series
It is only compatible for iPhone X, iPhone XS, iPhone XR, iPhone XS Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, and iPhone 12,
iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 mini.
Please pay attention to your mobile phone model before purchasing, helping you keep the cost down.
Slippable and lightweight
The camera cover is switched under your control, easily stop web hackers from spying on your life.
Thin and durable, attractive and practical.
SFM
2025-09-06 15:23:12
EDIT: It’s great!! It came unstuck once and was stuck underneath where the camera is. I figured it was done because of all the complaints about them coming unstuck. I placed it back over the camera till I ordered another. It hasn’t come off yet!I would probably change it out after a while, but it’s been several months and is holding strong.When you first put it on, pocket lint will stick to it, but it’s easy to remove and hasn’t been a problem over time. I figure the sticky edges of it have been blocked by tiny lint and dust and no longer stick to bigger lint pieces.It will slide open on its own semi regularly. It’s no big deal to slide it back over when noticed. It wants to stay in the covered position, but can be knocked out of its resting closed position when rubbing up against stuff in my pocket.I figure if they made it stronger my enough to stay in place with a lot of rubbing, it’d either break off or force the whole thing off the face of the phone.I think these things are great.——3–———•I had a screen protector that had the notch at the top carved out. The lense cap didn’t fit in there perfectly. It blocked the camera, which is great, but it interfered with the thing that does Face ID.I went ahead and bought a screen protector that only has the ear speaker carved out. I put my second lense cap over it. Success!! It now blocks my camera lense and the Face ID work’s perfectly.I bought a screen protector called Spigen. It’s a good one. I’m sure others like it would be fine.I’m totally worried about it coming unstuck soon, but if it does I promise to edit this review. So far so good!
A
2025-09-03 21:32:58
These work really well. They're easy to apply, and once on, don't come off. The adhesive doesn't really stick at first, so it's easy to precisely line it up before applying pressure to hold it in place.The trick to making sure the adhesive bonds with the glass is to clean the screen with soap and water first. Wet your finger and rub the screen. Then put a drop of dish detergent on your finger and rub it around. Then more water on your finger to rinse it. Then dry it with a paper towel.Doing it that way ensures the cover won't come off. At least for a while. Mine has been on my screen for a month and shows no sign of coming off any time soon. The front camera cover and holes for everything else all work as expected.
D. Watsn
2025-08-12 13:07:32
Damaged in a month.I purchased this lens cover for my iPhone Xr front camera on 3/12/22. The return window closed on 4/13/22. Today is 5/4/22 and I just realized that the little black circle that you slide to cover the camera lens in my phone was missing.All that was left on my phone was the black frame for the lens cover. While I had it on my phone I did like it, but I think sliding it over and back for about a month, which I probably did about 10 times since I don’t use my camera that often, is a lot of wear and tear on it.It’s a pretty fragile piece of thin plastic. So now I’m looking for a different replacement to see what will work instead of this product. Bummer.UPDATE: The company contacted me shortly after I shared my review, apologized for the experience I had and offered to send me a replacement, which they did.They did advise some possible causes of the defect such as pushing/pulling my phone in my pocket in/out of a pocket could be a cause of it breaking and thinking back I may have don that a few times which may have caused it.The company was kind enough to promptly send me replacements plus a couple extra. I have not had the issue send but I also have not put my phone in my pocket.The replacements have a new shiny metal lens cover and seems to fit better on my phone.It’s been about 3 months now and no issues. I would suggest using this product.So far so good and I am happy with the replacements.
RareReviewer
2025-08-04 11:00:01
I love the adhesive and the design of this lens cover, and have ordered three now in last year, because the sliding lens cover keeps popping off. This last one only lasted 3 weeks—or it was that long until I noticed the round little cover was missing. I am not even doing much with my phone. I wish the sliding cover would not come off, but since there’s nothing else like it, I keep buying it.
Leviticus Elisaia
2025-08-01 18:46:23
Works good my only issue with it was it’s a tiny bit too big to fit with my screen protector on i ended up having to cut some off to get it to fit
F. Nutter
2025-07-26 15:15:58
This is a good product and I would purchase it again.
Astrid Rach
2025-07-23 14:49:09
It doesn’t stay stuck, cool idea, I’d pay more for one that stuck longer but I’m not gonna spend 10 bucks a week on these things. I went thru 2 in a week and they just don’t stay stuck. It’s basically a sticker with a slider thing and it sucks not the price but cuz it doesn’t stay on. I’m gonna use a regular sticker probably cuz I don’t really do selfies anyways but I promise u it’s cheap crap and u should find another option
BD
2025-07-15 13:34:39
This fit my iphone perfectly and works very well. It is easy to slide when I want to use the camera without obstructing the picture taking abilities.It is best to open a white page or white background or adjust the brightness of the phone screen to help with initial placement. This way, when adhering it to the phone it is easy to see where it should be placed.
Jude
2025-07-11 15:00:34
I don't even see it and I've forgotten it's there. But I love the automatic peace of mind that comes with this simple little sticker.
DavidMicho
2025-06-27 16:27:25
Bot worth it, breaks as soon as you pocket your phone. Not worth for the price. If the flue gets hot it moves around. And still the phone can recognize your face.
dino
2025-06-19 14:56:56
Funciona a la perfeccion, lo unico es que si le pones una mica protectora a la pantalla tienes que recortarla para que asiente bien la mica y lo otro es que el precio es muy caro para lo que es.
ALVOY
2025-06-09 18:16:52
Does the truck sticks very well
Mariuz!!!
2025-06-06 17:33:31
Lo volvà a comprar con toda la intención de lograr fijarlo... en resumen, ni con kola loka pego...Yo recomiendo no comprarlo hasta que resuelvan el problema de adhesión.Sigo pensando que la idea es brillanteEl diseño e idea es formidable.Lástima que duro exactamente 20 dias adherido al teléfono.La plantilla es casi exacta al iphone 12 pro, diferencia de micrómetros muy aceptables.Seguà las indicaciones de montaje al pie de la letra. Supongo mis costumbres de uso no son compatibles con las facultades del protector de cámara frontal.PodrÃa volver a comprarlo si encontrara un pegamento no corrosivo.Disfruten mientras les dure.
SFM
2025-06-02 10:14:58
EDIT: It’s great!! It came unstuck once and was stuck underneath where the camera is. I figured it was done because of all the complaints about them coming unstuck. I placed it back over the camera till I ordered another. It hasn’t come off yet!I would probably change it out after a while, but it’s been several months and is holding strong.When you first put it on, pocket lint will stick to it, but it’s easy to remove and hasn’t been a problem over time. I figure the sticky edges of it have been blocked by tiny lint and dust and no longer stick to bigger lint pieces.It will slide open on its own semi regularly. It’s no big deal to slide it back over when noticed. It wants to stay in the covered position, but can be knocked out of its resting closed position when rubbing up against stuff in my pocket.I figure if they made it stronger my enough to stay in place with a lot of rubbing, it’d either break off or force the whole thing off the face of the phone.I think these things are great.——3–———•I had a screen protector that had the notch at the top carved out. The lense cap didn’t fit in there perfectly. It blocked the camera, which is great, but it interfered with the thing that does Face ID.I went ahead and bought a screen protector that only has the ear speaker carved out. I put my second lense cap over it. Success!! It now blocks my camera lense and the Face ID work’s perfectly.I bought a screen protector called Spigen. It’s a good one. I’m sure others like it would be fine.I’m totally worried about it coming unstuck soon, but if it does I promise to edit this review. So far so good!
A
2025-05-28 12:13:47
These work really well. They're easy to apply, and once on, don't come off. The adhesive doesn't really stick at first, so it's easy to precisely line it up before applying pressure to hold it in place.The trick to making sure the adhesive bonds with the glass is to clean the screen with soap and water first. Wet your finger and rub the screen. Then put a drop of dish detergent on your finger and rub it around. Then more water on your finger to rinse it. Then dry it with a paper towel.Doing it that way ensures the cover won't come off. At least for a while. Mine has been on my screen for a month and shows no sign of coming off any time soon. The front camera cover and holes for everything else all work as expected.
D. Watsn
2025-05-12 15:25:30
Damaged in a month.I purchased this lens cover for my iPhone Xr front camera on 3/12/22. The return window closed on 4/13/22. Today is 5/4/22 and I just realized that the little black circle that you slide to cover the camera lens in my phone was missing.All that was left on my phone was the black frame for the lens cover. While I had it on my phone I did like it, but I think sliding it over and back for about a month, which I probably did about 10 times since I don’t use my camera that often, is a lot of wear and tear on it.It’s a pretty fragile piece of thin plastic. So now I’m looking for a different replacement to see what will work instead of this product. Bummer.UPDATE: The company contacted me shortly after I shared my review, apologized for the experience I had and offered to send me a replacement, which they did.They did advise some possible causes of the defect such as pushing/pulling my phone in my pocket in/out of a pocket could be a cause of it breaking and thinking back I may have don that a few times which may have caused it.The company was kind enough to promptly send me replacements plus a couple extra. I have not had the issue send but I also have not put my phone in my pocket.The replacements have a new shiny metal lens cover and seems to fit better on my phone.It’s been about 3 months now and no issues. I would suggest using this product.So far so good and I am happy with the replacements.
RareReviewer
2025-05-07 14:15:06
I love the adhesive and the design of this lens cover, and have ordered three now in last year, because the sliding lens cover keeps popping off. This last one only lasted 3 weeks—or it was that long until I noticed the round little cover was missing. I am not even doing much with my phone. I wish the sliding cover would not come off, but since there’s nothing else like it, I keep buying it.
Leviticus Elisaia
2025-04-12 10:55:39
Works good my only issue with it was it’s a tiny bit too big to fit with my screen protector on i ended up having to cut some off to get it to fit
F. Nutter
2025-04-03 19:57:16
This is a good product and I would purchase it again.
Astrid Rach
2025-03-18 15:24:05
It doesn’t stay stuck, cool idea, I’d pay more for one that stuck longer but I’m not gonna spend 10 bucks a week on these things. I went thru 2 in a week and they just don’t stay stuck. It’s basically a sticker with a slider thing and it sucks not the price but cuz it doesn’t stay on. I’m gonna use a regular sticker probably cuz I don’t really do selfies anyways but I promise u it’s cheap crap and u should find another option
BD
2025-01-27 18:21:44
This fit my iphone perfectly and works very well. It is easy to slide when I want to use the camera without obstructing the picture taking abilities.It is best to open a white page or white background or adjust the brightness of the phone screen to help with initial placement. This way, when adhering it to the phone it is easy to see where it should be placed.
Jude
2025-01-25 14:15:08
I don't even see it and I've forgotten it's there. But I love the automatic peace of mind that comes with this simple little sticker.
DavidMicho
2025-01-12 13:42:33
Bot worth it, breaks as soon as you pocket your phone. Not worth for the price. If the flue gets hot it moves around. And still the phone can recognize your face.
dino
2025-01-02 09:39:13
Funciona a la perfeccion, lo unico es que si le pones una mica protectora a la pantalla tienes que recortarla para que asiente bien la mica y lo otro es que el precio es muy caro para lo que es.
ALVOY
2024-12-18 18:20:48
Does the truck sticks very well
Mariuz!!!
2024-11-22 12:21:28
Lo volvà a comprar con toda la intención de lograr fijarlo... en resumen, ni con kola loka pego...Yo recomiendo no comprarlo hasta que resuelvan el problema de adhesión.Sigo pensando que la idea es brillanteEl diseño e idea es formidable.Lástima que duro exactamente 20 dias adherido al teléfono.La plantilla es casi exacta al iphone 12 pro, diferencia de micrómetros muy aceptables.Seguà las indicaciones de montaje al pie de la letra. Supongo mis costumbres de uso no son compatibles con las facultades del protector de cámara frontal.PodrÃa volver a comprarlo si encontrara un pegamento no corrosivo.Disfruten mientras les dure.
Recommended Products