Your cart is empty.
Your cart is empty.
Do not use tinted shield at night or during low visibility.
Heavy duty nickel snaps and they will not drop easily. Please press hard to hear the "click" sound before the installation is completed. If it is not installed completely, it will blow out of the helmet while riding.
"Male snaps system" for our different styles "female snaps" use, so you can decorate the male snaps of shield as you like. We will gift extra 3 piece female snaps (Randomly Color) for you to decorate your helmet or shield!
High quality made in Taiwan.
* Helmet Not Included.
jfab
2025-08-28 14:52:25
I took the visor out of the package and snapped it right into my Bell Custom carbon 500 3/4 helmet and it took less than a minute to do. I then snapped the three button caps onto the outside snaps. Took the helmet out for a ride today and it worked great. Great sun blocking and stays firmly attached while riding at higher speeds. My only complaint is that when the wind hits the shield the button caps rattle like crazy. I am either going to take them off or put a few drops of super glue to stop the rattle.
J Barnes
2025-07-27 12:43:51
Was an easy fit on My David Clark aviation Helmet. I also tried it on a motorcycle helmet with the three standard snaps and it worked as well. nice product at a great price
Christian Kustomz
2025-07-23 10:45:40
I’m a fan. It clipped on perfectly to the snaps of my Torc helmet. I do wish the visor had my range to lift upwards but other that, it works great for what I’m needing. I’ve testing it out for almost a few months and so for it has not popped or broken off. Seems to be durable. Good value for the price
Joel
2025-07-08 17:50:17
I really wanted to like this, but as others have said, it does not pivot down nearly far enough. To be fair, it probably depends a lot on the location of the snaps on your helmet, but on my Shoei, it just did not work. Looked good otherwise.
Bill
2025-05-02 13:46:46
I got this for my BILT Falcon Helmet. Attaching to the helmet was difficult. The center snap went right on but I had a heck of a time getting the two end snaps to line up. Eventually I was able to get it to attach and took it for a test ride. So far so good. At first I didn't think the shield would be able to raise and lower, however I was pleasantly surprised that I can raise it all the way up out of the way.P.S. it comes with some red ruby things to attached to the snaps. I tried them and quickly tossed them. Not my thing.
Bob W
2025-04-09 18:09:21
I bought this so I could attach a visor over the face shield (that is why I assume it has snaps on the outside).As another reviewer noted, the snaps do not accommodate a visor over the face shield. The snaps do not align up correctly with the standard 3 snaps on a visor.
Big Dave
2025-04-07 16:34:00
Great price and built fairly well. Visor is nice and cuts the sun quite well!
IdahoRyder
2025-03-24 19:54:11
Visor snapped into place with a LOT of muscle, fit not quite perfect. Limited ability to raise out of field of view and sits high when down. Not very dark but inexpensive.
Mrs. S. Macdonald
2025-01-29 11:16:47
Disappointed with this did not fit good enough to helmet a gap so rain could run through it
Natalie Hartford
2025-01-22 11:19:19
Fits perfect. Slides up smooth. Exactly what I wanted. Thank you!!!!!
ã¹ãƒ¼
2025-01-16 16:46:22
余り期待ã›ãšã«è³¼å…¥ã—ã¾ã—ãŸãŒã€æ€ã£ã¦ã„ãŸä»¥ä¸Šã«ã—ã£ã‹ã‚Šã—ãŸä½œã‚Šã®ã‚‚ã®ã§ã—ãŸã€‚真å¤ã®ã‚µãƒ³ã‚°ãƒ©ã‚¹ã¯ä¸è¦ã§ã€ãƒã‚¤ã‚¶ãƒ¼ã¨ãƒ˜ãƒ«ãƒ¡ãƒƒãƒˆæœ¬ä½“ã®éš™é–“ã«ã‚‚ã¡ã‚ƒã‚“ã¨ã‚¯ãƒƒã‚·ãƒ§ãƒ³ãŒä»˜ã„ã¦ã‚°ãƒ©ã¤ãも雨水æ¼ã‚Œã‚‚皆無ã§ã™ã€‚ã¾ã•ã«ã€å¬‰ã—ã„誤算ã§ã—ãŸã€‚
ケンオウ
2024-12-13 17:06:44
シールドã¨ãƒ˜ãƒ«ãƒ¡ãƒƒãƒˆã®éš™é–“ã‹ã‚‰é¢¨ãŒå…¥ã£ã¦ãã¦é€Ÿåº¦ã‚’上ã’ã‚‹ã¨å‰ã‚’見ã¦ã‚‰ã‚Œãªã„
rinrin
2024-11-26 09:18:31
ムラã®ãªã„クリアーãªã‚·ãƒ¼ãƒ«ãƒ‰ã€‚普段ã®è¡—ä¹—ã‚Šã§ã®ã‚¹ãƒ”ードã§ã¯é¢¨ã®å·»ãè¾¼ã¿ã‚‚ãªãã€æš‘ã„å¤ã«ã¯å¿…需å“。残念ãªã®ã¯ãƒã‚¤ã‚¶ãƒ¼ã‚’付ã‘よã†ã¨ã—ãŸã‚‰ãƒœã‚¿ãƒ³ã®ä½ç½®ãŒåˆã‚ãªã„・・・サイズを確èªã—ãªã‹ã£ãŸãƒŸã‚¹ðŸ˜
Recommended Products
$34.99
$ 16 .99 $16.99
$14.50
$ 7 .99 $7.99