Your cart is empty.
Your cart is empty.Product Description
Kind reminder: Not compatible with Canon R50/200D, thank you.
Kind reminder: Not compatible with Canon R50/200D, thank you.
flash hot shoe adapter enables you to trigger a flash attached on top of the adapter hot shoe as well as triggering another flash connected via the PC sync lead. The accessories of the hot shoe can achieve all functions of the Canon camera in addition to the e-TTL of the flashgun. It fits all Standard ISO 518-2006 hot shoe flashgun including the 580EX, 580EX II, 550EX, 430EX, 430EX II etc. It has a PC sync socket so you can connect an additional studio light or flash via a PC sync cable.
Mainly used for PC port output connection flash
Flash PC interface
Camera set-top hot shoe PC port output
Customer
2025-08-29 13:16:32
Used it on my 5D Mark 3 and my R6 Mark II to trigger my flashes for my photo booth and it worked great. Haven't had a misfire yet.
thewavebb
2025-08-17 12:44:53
I am a professional Wedding photographer and the Canon 6d that I use as a backup camera body doesn't have a PC sync port built into it (i know...shame on canon). I shoot off camera flash and I needed a PC sync port to plug my Cybersync CST trigger into as I like to have 1 speedlight on my camera's hotshoe and then have the CST trigger firing off the remote flashes via the PC sync port. I had my 2nd photographer shoot with this adapter for the past 3 weddings and it has held up really well. It has threads on the port so I can still use my screw lock cables and it locks down extremely well to the hot shoe. No risk of it falling off with a flash attached to the top of it. The plastic seems durable and of solid construction. Glad to see a great work around that didn't cost a lot of money.To those that are looking to use this as an adapter to run a PC sync cable to a flash, ....this isn't the adapter for that. I have yet to find one of those adapters on amazon, but I know that Flash Zebra has a few different ones that work well.
Customer
2025-08-10 10:15:39
Really works great, low profile not an eye sore. Great seller!
Daniel Eichmeier
2025-07-29 17:21:05
These did not work.
Poko
2025-07-15 16:51:38
Ok people, this adapter works great for what's its designed to do,this adapter is for ON THE CAMERA to give you a PC sync trigger signal output, is not to be used as a PC sync input adapter on a remote flash...The way I am using the adapter I have this Adapter directly on the hot shoe of My camera (Canon T3i), then I have an off camera E-TTL extension cord connected to the shoe on top of this adapter and it runs to my Canon Speedlight I use as the key light in a softbox. I then also have a PC Sync cord connected to this adapter which is plugged into my radio transmitter (aperature Trigmaster plus) which Sends out the signal to fire my 2 additional softbox strobes as fill lights.In this setup I get 2 fully manual, RF triggered fill lights plus my Key light thats connected with the E-TTL cord so it can function in full E-TTL mode.I could have put my RF Trigger directly in the camera shoe and used a 3rd RF receiver to trigger the key light but then I wouldn't have been able to retain ETTL function on the Key Light. I need this adapter to make my setup work and use the radio trigger + keep ETTL function.
Mark Genovese
2025-07-08 17:21:02
A well constructed and functional adapter. I can't get too excited about it which is why its 3 star, its ok and it works. It is sturdy enough to hold my Newer speed light however i only use it when i need to use a PC sync cable so I do not normally attach a flash to its hot shoe. Just to clarify this is not a means to fool your canon camera in to thinking a manual flash is a TTL flash. My Canon T5 i will not trigger a non TTL flash when in live view, manual flash only fires only while using the eye piece view finder. This adapter only passes the TTL signals through it to a TTL flash if it is attached.
Philip G. Ruffolo
2025-05-24 10:25:16
This is one of those accessories that is needed once in a blue moon, but indispensable none the less. The only thing I need this for is to get a dead accurate flash meter reading using a 50 ft. PC sync cord (12 or 25 ft. just too short,). My camera (Canon EOS Rebel T5i) is not equipped with a PC sync socket since the hot shoe has such advanced capability. My flash meter will operate without a direct connection, but occasions call for critical metering. At those times, this and the long PC sync cord are a must.I find the quality of this piece to be quite good.
J. Sroka
2025-05-22 17:57:48
Need to use with a lot of flashes. Two for my Canon flashes to not have a cable connection, this works great to fire the flash. I will be purchasing another Hot Shoe.
JB
2025-05-11 12:02:59
A simple well made piece of tech
alberto
2025-03-24 09:21:08
No funciona con cámaras canon t7 fraude total
Mastus
2024-12-26 14:28:33
Ich benutze diesen Adapter um eine Canon EOS R6 Mark II mit einer Studioblitzanlage zu verbinden. Bis jetzt funktioniert alles astrein. Die Verarbeitung / Material macht einen soliden Eindruck. Der Blitzfuß fügt sich sauber in den Blitzschuh der Kamera ein und läßt sich auch wieder gut rausziehen.
Saul-Swing
2024-12-25 16:09:26
Una buena compra si tu cámara no tiene entrada coaxial para sincronizar flashes externos por medio de cable.Se acopla perfectamente a la zapata de cámara, en mi caso, una Canon 1000D.La sincronización es perfecta y por ahora no he tenido ningún tipo de problema.La sujección es robusta y los plásticos bastante buenos.
Antonio
2024-12-22 17:24:24
Comprato per utilizzare un flash TTL per una Canon analogica su una Canon 505D funziona perfettamente (anche la funzione TTL).Abbastanza robusto.Poichè sospettavo che l'apparecchio potesse essere solo un contatto privo di sistema di protezione, lo ho aperto e ho riscontrato la presenza di un circuito elettronico che serve ad evitare alla fotocamera digitale le sovratensioni dei flash vecchio tipo.Sono soddisfatto dell'acquisto
Recommended Products