Your cart is empty.
Your cart is empty.Product Description
Instantly upgrade your network switch to PoE. Power an IP camera, desktop phone, WiFi access point, or other low voltage device through a network data cable using this Passive Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled ‘802.3af’, or you can use a 24 volt DC power supply to power 24-volt passive PoE devices like Access Points from MikroTik, Ubiquiti, and many more. Send Data In one port, and receive Data + Power Out from the other port. Extend PoE to devices up to 328 feet away from the source.
Convert non-PoE to PoE without needing to replace your existing switch or infrastructure. Benefit from versatility and customizability in your network configuration by adding PoE to any non-PoE switch, one port at a time. Great for home offices, temporary WFH setups, and small businesses utilizing security cameras, VoIP desktop phone systems, and WiFi Access Points.
10/100/1000 Gigabit Data Transfer
Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port.
PoE for Compatible Devices
- WiFi Access Points (MikroTik, Ubiquiti)
- VoIP Phones
- IP Cameras
- 802.3af devices
- 802.3at devices
NOTE: Compatible with IEEE 802.3af devices with “Always On” passive PoE
NOTE: Passive PoE is always on, so do not use on ports where a non-PoE device can be connected
Use with 12 to 56-volt power supply (SOLD SEPARATELY) 2.1mm x 5.5mm DC connector fits most AC adapters. Allows passthrough of voltage equal to the input voltage, ie. 12v will deliver 12v on the Ethernet, 24v will deliver 24v, 48v delivers 48v, all the way up to 56v.
Zero configuration, software installation, or troubleshooting needed. Eliminate interruptions with this cost-effective and efficient way to power your PoE device from a non-PoE switch. Plug the injector into the wall, put Data In one port, and receive Data + Power Out from the other port.
Versatile Network Readiness
Home Network - Easy to use in residential homes
Office Network - Functional to use in any size office
Surveillance Network - Safe to use for security needs
Service Industry Network - Ideal to use with WiFi Access Points in cafes, restaurants, bars, hotels, Airbnb, service & hospitality
- 2.1mm x 5.5mm DC connector fits most AC adapters
- The injector will always deliver the same voltage as its power supply
- Power supply sold separately
- Lighting fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port
- Transmits data to devices as far as 328 feet away
- Wall mount tabs allow for secure installation.
- Personalize and streamline your setup with the ability to screw it directly into walls near necessary outlets or into the underside of desks or shelving units.
K. LEE
2025-09-03 14:46:31
cheap and work with my Unifi, power my Unifi with 24v DC. Beautiful.
Dave C
2025-08-20 17:13:02
(Power Supply NOT Included)Feed power up to 48 volts DC with ease.Power is not required to pass data.These small devices that do the trick. The internal schematic sealed the deal, you see how simple the design is.These are much more flexible and lower cost than passive pigtail adapters.Note: These devices are polarity specific, positive and negative. If you have polarity flipped, no power will pass through.
Boaster
2025-08-18 16:53:01
BUYER BEWARE! Please heed all reviews for this item. This item is conveniently cheap and looks super simple and effective. Item did not work! Attempt to replace, but no replacements or returns! Amazon did process a refund, however. BEWARE, BEWARE!
Douglas Mead
2025-07-25 15:46:21
Great space saver. can be used for 24 or 48 Volt.
SnuggieUser
2025-06-25 17:15:18
The Order meets our requirements.
jeep2liberty
2025-06-20 19:27:45
Yes this is gigabit speed not just 100 poe standard.User supplies the DC power to the unit via a 2.1mm connection. Works with TP Link CPE710 GBE 24V.
Brent
2025-06-14 16:55:03
There is no way to return, that's true.I have had good luck powering LTE radios and LTU lite stations. It however seems to struggle (I think) with the larger rocket. Regardless if it's 24V or 54V the rocket gives up working and just quits. Seems fine on an actual inserter. The rocket prefers 4 pairs and this is 2 - hence the voltage doubling. Still no dice.
J. D.
2025-05-27 13:30:19
Fits the need for a compact single port Mode B PoE injector. We have used these previously as injectors and splitters where the space would not allow installing AC power for the power supply
SYLVAIN
2025-05-26 09:59:26
C'est parfait pour un POE
David Lusty
2025-04-26 13:54:29
This little device is unnecessary as it literally just connects power into a couple of wires. It makes the job very neat though, and takes less time to put in. I used it on a boat to add PoE for a wifi router and it works perfectly.
Stefan Ufer
2025-04-19 16:02:19
123
ismael
2025-04-16 11:58:52
Es producto se corresponde con la descripción, es un inyector POE pasivo de pequeñas dimensiones y buena calidad de fabricación, esta construido en plástico y tiene unas pequeñas petallas para poderlo atornillar y que quede fijado, dispone de dos puertos ethernet (RJ45), uno para inyección POE y otro para la entrada de red, tiene un conector de alimentación DC de 2,1 mm x 5,5 mm y un pequeño led verde que indica si hay corriente eléctrica. Funciona con una tensión continua de entre 12-48v y 1A, la fuente de alimentación no esta incluida. Tampoco incluye ningún tipo de instrucciones.Lo he usado para alimentar un cámara de videovigilancia a 12V 1A, a unos 15 metros de distancia y hasta ahora ningún tipo de problema. Para mayores distancias es posible que no funcione correctamente a esta tensión.Lo que me a gustado:- Es de pequeñas dimensiones- Buena calidad de fabricación.Lo que podrÃa mejorar:- Que se incluyeran algunas instrucciones en español.- El precio es aceptable, aunque por ser un producto simple que carece de demasiados componentes electrónicos, estarÃa bien un poco más barato.Lo que no me a gustado:- Hasta ahora no he tenido ningún inconveniente.
Alex
2025-04-07 13:32:55
Cercavo un POE passivo gigabit. Se ne trovano tanti a basso costo ma non sono gigabit. Questo invece lo è, funziona bene, è dotato di uno spinotto standard 5.5mm x 2.1mm per l'alimentazione. Rccomandato
K. LEE
2025-04-03 17:35:04
cheap and work with my Unifi, power my Unifi with 24v DC. Beautiful.
Dave C
2025-03-25 10:20:17
(Power Supply NOT Included)Feed power up to 48 volts DC with ease.Power is not required to pass data.These small devices that do the trick. The internal schematic sealed the deal, you see how simple the design is.These are much more flexible and lower cost than passive pigtail adapters.Note: These devices are polarity specific, positive and negative. If you have polarity flipped, no power will pass through.
Boaster
2025-03-23 17:39:36
BUYER BEWARE! Please heed all reviews for this item. This item is conveniently cheap and looks super simple and effective. Item did not work! Attempt to replace, but no replacements or returns! Amazon did process a refund, however. BEWARE, BEWARE!
Douglas Mead
2025-03-22 16:21:44
Great space saver. can be used for 24 or 48 Volt.
SnuggieUser
2025-03-18 12:25:21
The Order meets our requirements.
jeep2liberty
2025-02-13 10:38:17
Yes this is gigabit speed not just 100 poe standard.User supplies the DC power to the unit via a 2.1mm connection. Works with TP Link CPE710 GBE 24V.
Brent
2025-02-06 18:04:40
There is no way to return, that's true.I have had good luck powering LTE radios and LTU lite stations. It however seems to struggle (I think) with the larger rocket. Regardless if it's 24V or 54V the rocket gives up working and just quits. Seems fine on an actual inserter. The rocket prefers 4 pairs and this is 2 - hence the voltage doubling. Still no dice.
J. D.
2025-02-04 20:09:49
Fits the need for a compact single port Mode B PoE injector. We have used these previously as injectors and splitters where the space would not allow installing AC power for the power supply
SYLVAIN
2025-01-24 15:32:16
C'est parfait pour un POE
David Lusty
2025-01-21 14:41:43
This little device is unnecessary as it literally just connects power into a couple of wires. It makes the job very neat though, and takes less time to put in. I used it on a boat to add PoE for a wifi router and it works perfectly.
Stefan Ufer
2025-01-19 11:41:38
123
ismael
2024-12-13 10:54:44
Es producto se corresponde con la descripción, es un inyector POE pasivo de pequeñas dimensiones y buena calidad de fabricación, esta construido en plástico y tiene unas pequeñas petallas para poderlo atornillar y que quede fijado, dispone de dos puertos ethernet (RJ45), uno para inyección POE y otro para la entrada de red, tiene un conector de alimentación DC de 2,1 mm x 5,5 mm y un pequeño led verde que indica si hay corriente eléctrica. Funciona con una tensión continua de entre 12-48v y 1A, la fuente de alimentación no esta incluida. Tampoco incluye ningún tipo de instrucciones.Lo he usado para alimentar un cámara de videovigilancia a 12V 1A, a unos 15 metros de distancia y hasta ahora ningún tipo de problema. Para mayores distancias es posible que no funcione correctamente a esta tensión.Lo que me a gustado:- Es de pequeñas dimensiones- Buena calidad de fabricación.Lo que podrÃa mejorar:- Que se incluyeran algunas instrucciones en español.- El precio es aceptable, aunque por ser un producto simple que carece de demasiados componentes electrónicos, estarÃa bien un poco más barato.Lo que no me a gustado:- Hasta ahora no he tenido ningún inconveniente.
Alex
2024-11-28 17:40:31
Cercavo un POE passivo gigabit. Se ne trovano tanti a basso costo ma non sono gigabit. Questo invece lo è, funziona bene, è dotato di uno spinotto standard 5.5mm x 2.1mm per l'alimentazione. Rccomandato
Recommended Products