Shopping Cart

Your cart is empty.

Your cart is empty.

Powerbuilt Alltrade 648649 Kit 21 Clutch Pilot SAE/MM Tool Set Silver

5.0 (10) Write Review
Free shipping on orders over $29.99

$24.99

$ 10 .99 $10.99

In Stock
  • Made to be the most reliable tools in the market today
  • Tool solutions for most all situations
  • Built to exceed tool standards
  • Tool set for aligning clutch components when installing a new clutch
  • Aligns clutch plate and disc to pilot bearing
  • Includes tapered cone clutch plate adapter and centering shaft
  • Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch
  • Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch


Product Description

powerbuilt

Powerbuilt Clutch Pilot Tool Kit

Get your clutch in line with the clutch pilot tool set. Properly aligning the components is one of the most important parts of installing a new clutch. This handy set gives you the pieces you need to hold the clutch plate, disc and pilot bearing in the correct position while you are tightening the nuts. Strong and dependable enough to last a lifetime.

Kit Services: most foreign and domestic vehicles

Any specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt automotive installer tools take the concept of ‘help’ a big step further. It starts with the storage case – heavy-duty design ensures it will stand up to years of use and abuse. Inside the case lid you’ll find how to instructions and photos that show step-by-step usage instructions.

  • Keeps clutch components in place when installing new clutch
  • Durable storage case with step-by-step instructions
  • Precision-built to meet or exceed ANSI standards
  • Kit #21

Set includes:

  • Tapered Cone Clutch Main Adapter and Centering Shaft
  • 1.18"/.984" Pilot Bearing Adapter
  • .874"/.812" Pilot Bearing Adapter
  • .787"/.749" Pilot Bearing Adapter
  • .718"/.668" Pilot Bearing Adapter
  • .624"/.614" Pilot Bearing Adapter
  • .590"/.561" Pilot Bearing Adapter
  • 17mm/15mm Pilot Bearing Adapter
  • 15.8mm/12mm Pilot Bearing Adapter
  • Storage Case

Nachtjager
2025-08-04 16:10:31
I bought this set to reassemble the clutch and pressure plate in my 1929 Packard Dietrich Club Sedan because nobody has extra pilot shafts for the job. This thing lined the clutch up perfectly, and literally, when we stuck that big 225 pound transmission, it went straight in on the first push - we were stunned!WOULD HIGHLY RECOMMEND THIS KIT - BANG FOR THE BUCK, I DON'T THINK YOU CAN DO BETTER!
William R Iteen
2025-07-27 12:09:43
Looks to be made well
James
2025-07-24 18:42:40
I bought this kit /set to have just in case: good quality nice case
El moreno
2025-06-24 16:06:40
Exelente herramienta para centrar discos de croche de cualquier tipo de vehículo
Chris
2025-06-08 19:31:07
Works like it's supposed to lines up the clutch perfectly
Chris
2025-04-20 18:38:44
Although the tool got the job done, I had to modify everything to make it work. The pilot bearing inserts are not machined to the proper tolerances. I did not bother to measure them, but there was significant slop with any of the adapters I tried. I ended up picking the pilot bearing insert that was the closest match and wrapping it in electrical tape and then shoving it in the pilot bearing for a tight fit. Tight fitment on the pilot bearing is crucial or your clutch and flywheel will not be aligned properly. If you are using this tool I recommend using the tape trick to ensure good fitment. Because I couldn't get a good fitment with the pilot bearing adapter and had to resort to using tape, I had to be very careful and ensure I held the tool shaft straight. Normally if it fit in the bearing as expected, there would be minimal slop and you won't have to focus on keeping the guide shaft straight. In the end I was able to make it work because my OEM clutch never came with a disposable cheap plastic clutch alignment tool. For whatever reason I don't know. So I had to use this, but it is far from ideal. The plastic insert tools work better, so if you have one stick with that.
Robert Lefevre
2025-03-05 15:35:31
Good tool ,work
Kevin Williams
2025-02-20 17:50:11
Trying to line up my clutch with this tool kinda sucked so i was glad my new clutch came with its own alignment tool, which was far better.
martin girard
2025-02-14 17:25:38
j aine
Consumer advocate
2024-12-21 18:24:30
This should do the job if you have anything but a Fiat. None of the adapters were the size I needed. The low price reflects in the quality of the machining. The bore through the "cone" was off center in the one I recieved, and the threads in the tips were tight going on until they were run on and off a couple times. I don't think these issues would affect the ability to use the tool. Just be aware that lower cost = lower expectations.