Your cart is empty.
Your cart is empty.
Introducing the 4 inch Rectangular Dust Hood by POWERTEC.
This dust hood is designed to provide you with an easy-to-use wide mouth dust collection attachment. Not only does it capture a sizable area of dust and debris, but offers a handy – ergonomic design that can be placed in multiple positions for almost any dust collection requirement. It’s intended to work with a variety of machines and can be placed on top of a table/bench near the area where dust is being produced. The dust hood has a standard 4-inch port with a slightly tapered end to accommodate 4” ID dust hoses.
Premium Design and Construction
This dust collection dust hood possesses an interior funnel design. These ABS fittings also possess high tensile strength, abrasion resistance and durability – perfect for most workshops that deliver exceptional woodworking and professional quality results.
Package Contains
(1) Dust Hood Collector attachment
Dimensions
Overall size is 10" (across) x 4" (opening) x 9" (deep)
Please Note: For some flexible dust hoses, hose clamps may be required (not included).
POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
Blackjack
2025-08-30 11:28:14
Item is well made and strong. Rockler hoses will not fit without a little modification. Overall awesome product. Using for dust collection on lathe.
R. Duck
2025-07-26 12:15:30
Works as designed.
Gman
2025-07-10 14:06:31
This is a full 1/8" thick injection molded ABS part. What I really like about it is it makes for a perfect air intake for cooling the brakes on my race car.It is sturdier than all the "made for a race car" parts that cost two and three times as much. I just trimmed it down to fit, ground off the internal step and it worked perfectly for my 2007 WRX STi. Will work for 2006 too, at least. Fits to the opening for a fog lamp in the fascia. Works well with GM Z06 Corvette brake ducts!
cross_wings_wood
2025-07-08 21:37:39
I use this vac hood on my lathe. Like a big gulp, it sucks most all the dust and shavings that would normally create a huge mess in my shop. Attached the hood just behind the cutting area with a simple bracket I made from scrap wood. It's attached to the lathe table with a clamp so I can move it as needed. Very helpful.
Gramps
2025-06-10 13:23:54
This hood, of course, requires some engineering to use but it fit my need for dust collection in sanding on the lathe. The Jet 1642 lathe comes with a deflection guard that I've never seen anyone use but offers a sturdy mounting base for this hood. I turned six inches of a 16" long piece of 3" X 3" maple round to fit in the guard mounting base hole while leaving the remainder square. This then provided the correct location for supporting the hood, with some more engineering, to be moved within four inches of the piece being sanded. I only use it during sanding since that seems to the most problematic and most other products of turning are easy to clean up with a dust pan. Along with my Grizzly Cyclone Dust Collector (G0703) it gets 95% of the sanding dust. It is a cheap solution to protecting your lungs.
SandovalFam
2025-05-24 10:20:35
I’m a fan of powertec equipment. It’s competitively priced and works. This piece is no exception.
SchrodingersKatz
2025-05-10 18:53:26
I use this behind my benchtop wood lathe connected to this, the semi flexible tubing keeps it in place as I move it with the work and the size of the funnel is just right to pull in the dust I create when finishing turnings on the lathe. Very tough material.
gary
2025-03-05 18:18:34
IT IS TOBIG YOU NEED A BIG HOSE TO USE
D.C.
2025-01-24 15:26:23
Good quality, value and fits as advertised
Storm
2025-01-12 18:45:08
Good price.
shehab saeed
2025-01-11 12:19:55
all good
markr
2025-01-03 16:56:11
You can never have enough dust extraction in a workshop. Dust is a killer so having big dust catchers helps with my dust extraction system. This is tough and big.
Customer
2024-12-15 12:01:05
Works great, the 10" covers the saw blade when hanging above it, very little dust escapes.
Recommended Products
