Your cart is empty.
Your cart is empty.Product Description
Pro Chaser PC210-11942 Carburetor Package
Center to Center Mounting Hole Distance: 31mm / 1.22''
Central Bore Diameter: 15mm / 0.59''
Fuel Inlet O.D.: 4mm / 0.16''
- Replaces Part Number 62100-81010 A021000811 A021000810 A021000302 A021002040 A200774 A201112 300486
- Replaces Walbro WYK192 WYK-192 WYK-192-1
- Replaces Echo PB-650 PB651H PB651T PB-750H PB751H PB751T PB755H PB755SH PB755ST PB-755ST PB755T PB-755T PB-770 SRM-400
- Replaces Shindaiwa EB633RT EB630 blower
- Replaces RedMax EB6200 Leaf Blower
Central Bore Diameter: 15mm / 0.59''
Center to Center Mounting Hole Distance: 31mm / 1.22''
Fuel Inlet Nozzle O.D.: 4mm / 0.16''
Fuel Outlet Nozzle O.D.: 4.8mm / 0.18''
- Replaces Earthquake E43 E43CE E43WC auger/drill, MC43 MC43CE MC43E MC43ECE MC43RCE tiller/cultivator, Earthquake MD43 Dethatcher, Earthquake WE43 WE43E WE43CE walk-behind edger
- Replaces Powermate PEA438 PEA438.1 auger, PCV43 PCV43.1 PCV43.2 cultivator, PWSTM4317 PWSTM4317.1 PWSTM4317.2 String Trimmer Mower
- Replaces Southland SCV43 SCV43.1 SCV43.2 cultivator, SEA43 SEA43.1 SEA438 SEA438.1 auger SWSTM4317 SWSTM4317.1 SWSTM4317.2 String Trimmer Mower
- Replaces Eskimo Mako M43 M43Q9 Z51Q8 Z51Q9 Z51Q10 Z71 ice auger
- Replaces Huskee MC43ETSC
Corey Washington
2025-08-13 15:03:45
This carburetor was easy to install and got my leaf blower working well again. I highly recommend it.
Gene Tobin
2025-08-06 12:35:39
The carburetor was exactly what was described and replaced the faulty carburetor. Unit immediately ran great.
Rick L.
2025-07-14 16:35:23
The rubber tank plugs that came with this had 2 holes in them while my OEM only has one. Ended up using the old one. Two hoses and 2 fuel filters came in this. The pink hose was smaller diameter and fit the supplied fuel filters well, but not to the carb. The clear larger hose barely held onto the supplied fuel filter but was snug on the carb. Ended up just using the old fuel filter and the larger clear hose. Other than that, the carb fit and the motor fired right up and worked perfectly.
Matthew
2025-06-04 15:18:32
I made a mistake and destroyed the carburetor on my Ryobi RY38BP leaf blower (a gutter cleaning kit killed it, don't attach one of these to this blower). I can't find an aftermarket replacement for that carb. The impulse port is in an odd location, not matched by anything I could find. The Ryobi part, a Walbro carb, would cost about $50 shipped, and I didn't want to pay that considering that it's a $200 blower.This is a rotary throttle valve just like the Walbro and the throttle cable attaches in the same place. But the impulse port is way off, and the throat is bigger, .590 rather than .500. I made an adapter plate out of 1/8" aluminum stock, with the impulse port drilled all the way through where it contacts the intake manifold, and partway through where it contacts the carb, and made a channel between them with a small file (a mill would have been nice for this), and made gaskets for each side to match. I also beveled the intake port in the adapter plate to better match up the .590 carb throat to the .500 intake.I haven't adjusted the idle needle (and the plug is still in place) but it seems to be idling fine. The main needle as shipped was 2.5 turns out from its seat which seemed excessive, but putting it in one turn made it run very badly. I ended up with 3 turns out, or somewhere thereabouts. It's pumping fuel as it should and running very strong. Maybe even better than with the OEM carb. I was worried that the carb would be too big, but I don't think it is. And having an external high-side adjustment needle is a big plus.Note again that this is NOT a direct fit for the RY38BP blower. It took a few hours of work to make the adapter plate and gaskets. But next time I have carb problems, I'll just buy a new one of these and swap it out. You can't beat the price.It seems to be a good carb. If it's a direct fit for your application, you probably won't be disappointed.I just got done blowing for about a half hour. It died on me once and I don't know why. I pumped the fuel bulb a few times and it started back up and did not die again. It was blowing very well, moving mounds of wet leaves with no problem.
Amy
2025-05-22 16:04:28
As described fits properly works for me. Got Poland Pro leaf blower working properly.
Walter K Conley Jr
2025-05-11 18:09:51
Nice price
Customer
2025-05-08 14:42:37
Arrived safely and had no issues with installing into Poulan Pro Leaf Blower 48. Had let old gas sit for too long and gummed up the original Once adjusted the mix screw, ran just fine. Didn't need/use the included spark plug. If you are a little mechanically minded can save having to replace a tool or spend much more having someone do for you.
Matt
2025-04-28 10:58:27
I like the product and the price, I believe through the description that the parts would fit what I own, the only problem was the spark plug was the wrong kind. Other than that I was satisfied with what I received.
Boggy Path
2025-03-30 12:35:51
Spot on.
zozapan
2025-03-10 16:08:02
Run’s good. The rubber grommet fit’s loose and will probably leak over time.
Harvey
2025-02-15 16:42:43
Order came in a few days. Easy to install. Started on the second pull and runs great. I recommend using the "canned gas" rather than mixing your own gas/ oil mix...especially if machine is not used very often.
Customer
2025-02-03 13:53:09
Replaced a carb that had internal leak in check valve. Works great.
Tibo
2025-01-19 14:38:45
Le produit est arrivé dans les temps et c'est vraiment merveilleux
Recommended Products