Your cart is empty.
Your cart is empty.Product Description
Rivet nut tool combination
430 rivet nut combination kit
In this rivet nut assortment tool kit, we have prepared 430pcs rivet nuts for you, including: M3/160 pcs, M4/110 pcs, M5/70pcs, M6/70pcs, M8/20pcs, a total of 430pcs of pressure rivet nuts, it will help you when you need to establish a connection between bolts and nuts
Comes with manual rivet nut installation tool
This package comes with 1 set of rivet nut installation tools and 5 PCS rivet nut installation spindles. The horizontal handle design is sturdy and durable, very suitable for working in small spaces, and convenient for you to carry and use when going out.
Easy to use rivet nuts
Metric threaded rivet nuts are made of aluminum alloy and are very easy to curl. The knurled body design prevents slipping and clear threads ensure normal working between the nut and the bolt.
Essential fasteners for tool rooms
Rivet nuts are a common fastener in our tool rooms and will do the work for you when we need to create a connection between a bolt and a nut. Rivet nuts are widely used in sheet metal assembly, automotive/marine, metal doors and windows, and various industrial applications.
Suz
2025-08-29 15:28:24
My husband said it worked well for his needs.
Blanca Ortiz
2025-08-04 18:58:03
Me gusto que tiene rosca el remache
Customer
2025-07-24 15:58:51
Worked great to replace junk factory rivets in my GMC tailgate.
Steve H.
2025-07-03 11:11:07
Great assortment of aluminum riv-nuts. These are metric, which I did not have any of, so it will round out my hardware drawer.I verified all with a thread gauge, to make sure they are all course metric threads. They were, which means the thread sizes are:M3-.5M4-.7M5-.8M6-1.0M8-1.25 (not1.0)M10-1.5 (not 1.0 or 1.25)I pulled one into some scrap aluminum and it crushed well and fully formed into the hole. No spinning and seemed pretty heavy duty.Could not find a spec for what grip range they are able to accommodate, though. My unofficial eyeball says the smaller should be able to do up to .060 with no issues and the larger can easily go to .125 angle/tube/sheet. If you need to do anything thicker, it may be hit or miss if they would pull and seat properly. I'll cross that bridge if/when I need to, since I didn't have any scrap handle to try them.Be sure to note that you want to use the same material for you riv-nut and the metal you will be installing them in. It is not recommended to use aluminum riv-nuts in steel. This would create an issue with galvanic corrosion over time. But if you need to get riv-nuts into aluminum, the seem to be a great choice.
Rhett D.
2025-03-26 10:24:03
Good quality, good thread.
Cheelo
2025-03-03 12:19:06
I discovered Rivnuts on a recent project and wanted to pick up some aluminum ones for an automotive application. These were perfect for plugging a few self-tapper holes the previous owner put in the roof of the vehicle. I drilled out the holes, installed these rivnuts with some clear RTV, and the roof was back to being watertight. This kit is a great value and the aluminum rivnuts are very easy to install. Follow the info in the listing when drilling out the holes and you'll be fine. These are plenty of sizes for a variety of applications, I used the M5 size for my first project. Great quality product, highly recommend!
DW in NE
2025-02-27 15:09:41
Garbage. Would have been better off with the older popover gun
chrispartida
2025-01-18 18:26:17
With the few I've had to use so far, they worked, and worked well enough. Haven't had any issues with the rivnuts breaking, but I'll definitely update this if I see that occurring.Make sure not to compress them too quickly, as aluminum doesn't like quick deformation, as it creates a lot of heat. Also make sure to have good straight pulling of the rivnut tool, so you don't torque the nut.
Recommended Products
$12.99
$ 6 .99 $6.99