Your cart is empty.
Your cart is empty.PRO PLUG PVC Tool: The Tool drives screws to the correct depth every time in deck and trim applications. It features a No Cam-Out Auto-Stop mechanism that prevents the screw from stripping and a free spinning stop collar that protects the board surface Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
Paul E. Jerome
2025-06-11 16:52:42
I needed to set some new decking in with face applied screws, set to a depth that could be covered with matching plugs. This bit worked like a charm, and functioned very well. I installed Moisture Shield decking in a Catalina color and used the recommended plugs. I don't know why but several local places in my area that sold the decking I used didn't carry this bit in stock. So thankfully I could get it from Amazon.
Jerry B. Cobb
2025-06-03 17:32:24
Did not use
Calvin Byrd
2025-05-10 18:20:58
Worked great until bit retainer broke, but still pretty good. Put complete porch and deck in Trex
edyturpin
2025-04-21 18:02:53
If your installing Trex or any other composite decking and using hidden fasteners, this is necessary. It was quick and easy, no marring on the deck finished surface.
Geoff Hazel
2025-03-22 20:35:46
If you're face screwing PVC decking boards, this tool does the job. After it drives the screw just the right distance, it disengages. The screw heads are not damaged and can be unscrewed once you pull the bit out of the tool and put it in a standard bit holder.The screw heads leave a small hole that is just the right size for the plugs (purchased separately) to be driven flush and hide the hole.I had no trouble with the tool. The directions did mention if you're pulling out the bit (or putting it in) rotating it slightly helps it seat. This is accurate.
Jennifer how
2024-12-05 15:26:46
It worked great until the trim bit wore out and I needed to replace it. I bought the Pro Plug bits that go with the tool and they will not lock into place. If the bit moves around, the screw will not go in properly. Waste of money. Just use the bit that comes with generic screws.
Kenneth James Gemmill
2024-11-23 16:30:29
The product works well
MAGA!
2024-11-14 10:03:44
Debth setting clutch and internal bit clip ring wears out after few hundred screws. It took four to complete my 700sqft pvc deck!
Recommended Products
