Your cart is empty.
Your cart is empty.Product Description
Just pump and fix it
Possible to get max suction power
As you get the air out thru multiple pumping, you can always reach the maximum suction power, 18 lb.
Keeping the suction power
When you see a red-line on the button, pump again to recover suction power. That will keep maintaining stable suction power for an extended period.
Adjustable and stoppable
It is adjustable and stoppable with tension at any angle to 45° from the wall. Insert shower head first and move it.
Standard slot diameter : 24 mm
The adjustable slot can hold various types of shower head or shower hoses. Just for making sure, check your shower head connector, large cone-shaped, diameter before ordering.
Where does it stick best?
Suction cups adhere best to smooth, non-porous surfaces such as tile, glass, fiberglass, or metal.
A suction cup might work on the tiny dumpling or wavy texture due to the material's high elasticity.
But if there is too much air flowing on the surface that elasticity can not cover, suction won't work.
To ensure a firm bond, surfaces should be free of dirt before attaching the suction cup.
The wet surface does not matter.
Installation and remove
Clean the surface
Clean the suction plate and the surface to attach. Spray water a little on the wall. It helps suction work better.
Press button 7 to 8 times or more
Pump the center button 7 to 8 times until the red line is not visible.
Lock the knob
Lock the knob clockwise. It adds extra suction power.
Remove
Loosen the knob anticlockwise.
Push cards or spoons between the suction plate and wall to remove it. Do not use sharp edge stuff that could give damage the suction pad.
Remove and reuse without drying
In the case of reuse, wash the suction cup with flowing water and follow the installation instruction.
No dry needed. A wet suction surface helps suction work smooth and better.
MinBee
2025-08-24 19:08:02
I'm finally hands free in the shower. Yay! Installation was a no brainer. Just positioned it on the wall and pressed the button a few times to activate the suction and secure it. It's been up for a month and hasn't moved. I positioned it low enough so my hair doesn't get wet so no more need for a shower cap. Big plus for me! This showerhead holder is not flimsy and has performed flawlessly so far.
A Baldridge
2025-08-13 10:29:09
This works great. The suction is really tight. Holds my heavy Moen hand shower head with no problem
Mike
2025-08-09 14:22:42
Works as expected and it holds my shower head exactly how I want. It was easy to put on the wall and easy to pump it to keep it tight. Definitely recommend.
Michelle
2025-06-15 11:36:22
Awesome for someone who doesn't want to attach permanently. I have it on the clear, smooth glass shower wall. I'm still deciding the position so I wanted something I could easily adjust without ruining the glass, or the holder. I also measured this time and this one works fine (the previous one was too small to hold the wand correctly). I left off the last star because the suction isn't as good as it should be. With it on perfect glass I expected it to last for months before I need to pump it up. If I leave the wand in the holder, I need to pump it up the next day. I've been leaving the wand hanging and only using the holder during the actual shower time - seems to last much longer but I don't know how long yet. I should say that my wand is the heaviest one I've ever owned.
Andrew
2025-06-08 17:57:02
The push-button suction thing is what makes this worth it. It's stayed in place for a month solid so far and all I've had to do is press the button like once a week whenever I see the red stripe. I can even clean around it with no problem. You need a piece of carboard or a credit card to pry up the lip to release the suction.I should note that my shower is made from basic molded plastic with a smooth finish. I don't think it'd work well with textured walls or tiles that are smaller than the cup. The button is neat, but it's still a suction cup.The dial around the button is only there for you to adjust the left/right rotation of the mount, it doesn't affect the suction cup as it seemed to indicate in the video. I do wish there was a second dial for the up/down rotation though. I can see it not staying in place if you've got a heavy shower head.
Simon Templar
2025-05-24 12:49:33
Nice suction! It has been working for several months now.
kitty
2025-04-14 21:23:42
This was so simple to hang. You don't have to take it apart like so many others. I took it out of the package and was surprised to see how heavy it was. It is heavy duty plastic not cheap and flimsy. I followed the directions to the letter. I wiped the rubber with a cotton ball soaked with alcohol and did the same with the area of the fiberglass shower wall then wet the rubber with water and put it on the wall and pushed the button til the red disappeared. and turned the knob just a little to the right. That's it. It is on the wall tight. I don't care that it doesn't come in chrome like my shower head. My shower is white so it matches that. The quality is great and well worth the price. Buy one!!!
Ninjacorey
2025-03-29 10:37:04
Life changer! Nothing would stick to my shower walls so being disabled I always had to hold the shower head. Now I can take a proper relaxing shower! Love it!
NIM
2025-03-11 16:55:45
The media could not be loaded.
Mireille Bernier
2025-03-02 10:33:10
Je le trouve très bien fait, il tiens bien au mur dans la douche
David M
2025-02-07 11:03:24
Fantastic quality and worth every penny.
Shower holder
2025-01-15 19:38:18
This worked great with a normal showerhead. Had brought the glue one prior to this which fell in one use. This is working much better and can be moved and reused, without the headache of drilling.
Fabulous
2025-01-08 14:40:43
I've had no problems and have really loved being able to move my shower head to exactly where I need it. I've even moved it around a few times.I've seen other reviews of people having issues. I wonder if their product wasn't out together correctly before shipped to them or if they didn't put it back together correctly when trying to take it off and on the wall themselves.It can be tricky to remove it from the wall as the suction is so powerful, so it requires some disassembly. Therefore when putting it back together, you need to really make sure you do it correctly. The button part needs to go all the way in, and I think that is the part some people might be too gentle on when putting it back together - or maybe it wasn't quite put together correctly when they first received it? Make sure you can't see the red part of the button! That's how you know you have proper suction to the wall (assuming the wall is a good suction surface, that could be an issue too).
Recommended Products
$32.25
$ 15 .99 $15.99