Your cart is empty.
Your cart is empty.
Engineers have made many improvements and achieved seven major performance improvements. With proficiency, you can quickly replace the valve in 15 seconds:
Improved stability: The outer side of the tapered positioning tube is designed with grooves and convex rings, which greatly improves the friction of the hand and helps to provide more accurate positioning during the installation process.
Improved durability: The tapered positioning tube is made of high-strength plastic material and the tube wall is thickened to make it stronger and more durable.
Improved versatility: Optimized the aperture size of the cone part of the tapered positioning tube to adapt to more wheel hubs of different specifications
Improved convenience: The inner wall of the sleeve is smoothed and used with lubricating oil to reduce propulsion resistance and effectively protect the new valve.
Reliability improvement: The plum blossom handle of the push rod grip is thickened to enhance palm control, advance the valve more stably, improve the installation success rate, and advance the valve faster
Improved installation efficiency: The end of the T-shaped hook is chamfered. When hooking out the old valve, it can be pulled out of the rim more easily to prevent it from being stuck in the rim valve hole.
Improved safety: The T-hook handle end is welded through and wrapped in plastic, which reduces the safety risk of scratching your hands when installing with force and improves safety.
Griller
2025-09-04 11:49:18
Put some grease on the bottom of the valve stem to lubricate it in the insertion tube and it popped in a trailer tire, even though the hole in the wheel was smaller than the insertion tool and the insertion tool would not even go in it, it still compressed the bottom of the valve stem enough for it to slide through with all the grease I put on it! Wish I had bought one earlier
Brandon Winquest
2025-08-01 13:04:43
This is a very nice quality kit! All the tools stand up to the the job! This will be a great addition to my tool collection! Made it super easy to swap my leaky tire valve on my 2003 Chevy Silverado. Got the wheel safely removed from the truck. Took off the cap and removed the core the release all the pressure. Sprayed a little wd40 on the valve and slid the remover tool in with a little effort. Was easier than I thought it would be. Turned it to hook the valve and pulled it out, again with a little effort, but less than anticipated. Grabbed the funnel and push tool next. Assembled everything together per instructions, and then Sprayed the funnel and valve with wd40 and tried my first attempt. Had to hold the funnel down harder than I did cause it didn't make it in. Nbd, took apart, and tried again, using more force on the funnel to keep it still. Also used a rubber mallet this time to force it thru the funnel. Couple good taps on the valve and it popped right in. Was still pretty easy, just gotta make sure to hold the funnel down tightly. Re-aired my tire up, wiggled the valve to check if the leak was fixed and it indeed was. Saved me from taking it into the shop and will most definitely save me money over the long run. Definitely reccomend this kit for the home mechanic or DIY'er that likes to save money over the long run.
Gerald dasilva
2025-07-31 09:35:58
I was on the fence, but the valves are good quality and the tools did the one valve stem that I needed replaced without breaking lol so as far as I'm concerned it's great
bud
2025-07-03 10:40:33
If it works just once, it will have probably paid for itself.
Bamper
2025-06-14 10:02:15
The hook tool broke on the first try when attempting to remove old valve stem. The plastic cone tool to reset the new valve stem is too wide, making it completely unusable. This is not worth the money. I will be asking for a refund.
Becky Kirby
2025-06-10 10:36:54
Not as easy as videos make it look. But yes.. it does work . Also.. can not be used for motorcycle wheels... the tool is too tall and there is not enough room to install the valve stem between the wheel and hub of wheel.
RE
2025-05-04 15:49:11
Tire valve stem recently failed on a travel trailer. Researched a way to replace without breaking the bead and figured this kit was worth a shot.Pleasantly surprised at quality of kit and detailed instructions made it easy. Hardest part was getting the hook in to remove the old valve. Once out install of new valve stem was easier than expected. Did a second tire without removing it from the trailer. Less than 5 minutes for me to do both tires.This kit definitely saved time from having to take tires to a shop and most likely cheaper than what a tire shop would have charged.
Bear
2025-04-30 16:58:43
It took me less than a minute to slip in the new valve, very little effort ( but I am a big guy, lol ), I used laundry detergent, dipped the bottom of the valve in it then poured some in the funnel. On the ground I pushed it nearly there and as I said very little effort, the liquid laundry soap is super slippery. Then I positioned it over the stem hole in the wheel and slightly pushed it in, then pulled it out and it seated perfectly. I didn't use the pull out tool, I just cut the old one and dug it out with needle nose plyers. In short, this is a great tool and pays for itself after one use, cuz the rip off tire schmucks charge $20-$30.
KOLE Dhaliwal
2025-04-24 14:24:45
I was a bit sceptical but this tool is amazing! It only took me 5 mins to remove and install the new valve stem. The pull out hook tool is bit flimsy so not sure how long it will last but the conical installation tool is amazing. I definitely recommend this tool over other designs.
Rene
2025-03-31 15:16:19
Compré el Kit porque la llanta del vehÃculo se le salÃa el aire por fuera del pivote al moverlo, el cambio fue muy fácil, no tuve problemas, recomiendo este artÃculo.
DB Aust
2025-02-20 10:14:55
What a great tool, so easy to use. Replaced 2 stems in record time.
Customer
2025-02-08 15:14:32
The tool to pull out the stem was be bending... they could have used stainless for it.but other then that it's good. And yes as easy as they say.
Bob
2025-01-29 12:14:45
Hook tool is cheap, broke off at the t handle on the second tire. Rest of kit appears better and functions as advertised
Recommended Products
