Shopping Cart

Your cart is empty.

Your cart is empty.

Race Ramps RR-TJ Trak - Jax

Free shipping on orders over $29.99

$142.00

$ 65 .99 $65.99

In Stock

About this item

  • Race Ramps are made from a patented process using space age foam and a polyurea coating and they have a rubbery textured surface for maximum grip
  • Each ramp can hold up to 1500 pounds, that's 3000 pounds per set
  • These ramps are lightweight but very strong and durable
  • The ramps have no sharp edges, they will not scratch or damage your floor
  • Ramps have a large solid bottom that won't sink or slide on a level surface including dirt, sand, grass or asphalt


Trak Jax car ramps were inspired by an auto-crosser that didn’t want to buy a new, high-priced, low-profile jack just to change his tires at the track. These lightweight, durable car lift ramps get low cars up high enough to fit a standard floor jack under the car. At less than 5 pounds each and only 30.1” long, you can even fit them in the trunk of any sports car. Trak-Jax are available with or without a 1.5” stop.


LoganExplosion
2025-09-04 16:42:46
I had a pair of the (much larger) RR-56 for about a decade. Excellent product. But can only back the vette onto them. Too low for the front. So I can get jacks under the front/sides and go from there. But when I purchased these ramps (RR-TJ), it changed the entire game. These smaller ones are all I ever needed. Used them on many lowered sports cars over the last 8 years. Able to use these ramps to get low-profile jacks underneath, front or rear. They JUST fit under my C6 with ZR1 sideskirts. Also, these take up about 1/10th the space of the 56" ones in my garage. Can not recommend these enough. Spring for the RaceRamps brand and it'll last you a LONG time.
Atreyuuuuuuuuuuuu
2025-08-11 14:52:44
After finally bringing myself to spend the money on a race ramps product, i can say they are definitely worth the money, and I will be buying more in the near future.For a home DIYer these will be indispensable. Super lightweight, grippy, gradual incline, and most importantly they do NOT SLIDE.I know the price of these products can be a bit much to swallow, but trust me, after you use them the first time you will wonder how you ever used other products to begin with.
Jim
2025-06-24 15:22:48
These ramps are great ! they allow me to get my car just high enough to get my floor jack underneath. My car is a lowered 03 mustang. Theyre also extremely light and therefore easy to store. they're also surprisingly durable.
Mike Trumble
2025-06-17 18:48:31
These work great
Brad H.
2025-06-13 16:10:37
Love my raceramps. Have several sets but needed these to give my lowered car a little lift so I could get the jack under it.
Anthony
2025-05-29 16:32:15
I have a lowered 2003 Cobra, these are perfect for getting just enough height so I can get a jack under the K member. Ive also accidentally rolled off the other side and they are low enough where they didnt damage the side skirts. They feel almost foam like but they are strong. I wouldnt drive an SUV or full size truck on then though
M. Vigod
2025-03-19 12:58:26
So far I really like these ramps. I am using them to make it easier for me to get my cars up and down on a garage lift. The ramps that came with my lift must weight 80lbs each and are awkward to move around. I wanted something easy and light to make this task easier so took a shot with these Race Ramps.These ramps are not heavy at all. I can carry both with one hand and not even strain. My steel ramps that came with my lift were a hand and backbreaker to lug around. I found these didn't slip around so that was good. I didn't have any crushing of the ramps like a few reviewers stated but my cars are only 3000 lbs each so figure just 750lbs per tire and these are rated for twice that.So I gave 4 stars for the following reasons which may be more of an issue with MY particular use case vs what yours might be. First I would have liked them to be a little wider. My sports cars have very wide tires so they spread out over both sides of this ramp. If it was maybe 4 or 6 inches wider that would have been better for me and a little more room for error. Additional weight would have been negligible as these are already so light. Second was I wish they were maybe an inch or two higher. My lift is a little over 2 inches taller than the max height of these ramps so a little more "bump" to get on the lift platform. It does work in the end so my one-star takeaway was only because it wasn't "perfect" for my own use case.Note as some people said there are two versions of this. One has no bump at the top and the other one does have it. Since mine were being used to go onto a lift I bought the no bump version. If you are using these free standing you would want the one with the little bump at the end of the top platform for a "wheel stop" of sorts.
D. Francis
2025-03-07 10:47:46
Very sturdy and a smooth incline for my car with low ground clearance that won't allow a jack under the front crossmember. They are extremely light weight and easy to move around too.
Nathan
2025-03-06 18:09:48
They work great tuck away nicely and makes it easy to get a lowered jack under car for lowered cars. I can get my jack all the way to centre jack point so I don’t have to destroy my pinch welds.
Sean
2025-02-26 15:01:07
Perefect for my lowered S2000 and Accord. Easily gets the jack under the jack points. A bit pricey, but worth it IMHO. Very light weight and sturdy.
Customer
2025-01-21 18:18:23
Great product, must have for your automotive use!!
Randell
2025-01-19 15:42:07
Works great! Very lightweight but very durable. Fits in the trunk of my FR-S.
Customer
2024-12-20 13:53:01
Great product, just as promised. Doesn't slip on an epoxy finished floor.