Your cart is empty.
Your cart is empty.Product Description
AT10II 12 Channel Airplane Transmitter
AT10II Key Features
- Low Latency (3ms Fast Response)
- Voltage Telemetry on Radio Screen (PRM-01)
- RSSI, Low Voltage Fail Safe Alert Setting etc.
- Dual/Triple Rate, EXPO, EPA, Throttle Cut, Mix Control etc.
- Wired/Wireless Training, RC Simulator/Crossfire Support
- Joystick Mode Change (Mode 1 & Mode 2 & dual-stick back to center)
- RC Models Selection(Glider, Helicopter, Quad, Fixed Wing, Car, etc.)
*Frequently Asked Questions and User Manual are at the bottom of this page "Product guides and documents"
- Voltage Telemetry: Include Real-time airplane voltage monitor on AT10II screen when paired with voltage telemetry module PRM-01(package included). To telemetry flight information on the radio's screen like battery voltage, speed, altitude, RSSI, yaw roll and more, AT10II should be equipped with a PRM-03 module and flight controller APM, Pixhawk, Mini Pix, Turbo Pix.
- Programmable Mix Control: Easy to understand graph view, 5-12 channels can be programmed to any advanced setting. An Airbrake can be programmed by using pre-programmed mixes. Multi-servo elevator mixing for Flying Wings or V-Shaped tail models.
- Friendly Remind: Low RSSI, low voltage and throttle position alarm, with DD sounds and words remind you on outdoor readable LCD screen.
- Channel Servo Travel Display: Each channel travel can be real-time displayed on the radio screen, press EXIT from the home page to this page.
- Screen Background Switch: Support white or black screen background change, and backlight brightness is adjustable.
Left & Right Throttle Hand Modify
- AT10II can change the mode 2 from mode 1 or dual-stick back to the center for different use applications.
- Note: you need to calibrate the joysticks after changing the modes.
- Simulator/Training Crossfire module Support: it supports wired/wireless training function, and AT10II compatible with the majority of aircraft simulator software like Realflight, PhoenixRC, FreeRider, etc.
- Update Firmware Support: AT10II radio is easily updated to the latest firmware. Simply connect the transmitter to the PC with a USB cable for updating. Not supported updating firmware with an Apple Mac computer.
- Works with a Variety of Radiolink Receivers: R12DS, R12DSM, R12DSE, R9DS, R6DS, R6DSM, or TBS receiver when works with crossfire module.
- Adapts to Most types of RC Models: 15 models data storage, and it supports models, like Fixed Wing, Airplane, Multirotor, Helicopter, Mower, Cars, and Baitboats. To work with Drone, we suggest going to mini size R12DSM, R12DSE, R6DSM.
- *Note: Simulator sold separately. To use the simulator, your receiver should switch to PPM signal. (R6DS/R6DSM/R12DSE/R12DSM receiver has PPM signal).
R12DS 12 Channels Receiver
- Support PWM/SBUS signal output, 3.6-12V support.
- Quick press the bind button to switch signal, SBUS used for the flight controller.
Airplane Voltage Telemetry Module
- Real-time telemetry airplane voltage monitor on AT10II's screen when paired with voltage telemetry module PRM-01.
- To support more flight informations telemetry, AT10II need equiped with PRM-03.
7dBi High Gain Antenna
- With 7dBi high gain antenna, cuts down interference, that's ensure control range up to 4KM (2.4 Miles).
- Lower signal noise with a channel Bandwidth of 5.0 MHz.
- RF power output is over 100mW for a stable response.
Voltage Protection System
- AT10II with reverse polarity protection circuit, do not worry about it damage even you insert wrong polarity.
- Battery box dimensions: 115(L)x32(W)x30.5(H)mm (4.5’’x1.25’’x1.2’’)
- Batteries are not included
Jose
2025-08-28 19:58:37
Good Experience.
Alec Justice
2025-08-27 14:24:32
Doesn't work with any of my devices OR simulators it was advertised as being. Tried several receivers and cables, nothing worked. Device was recognized and paired, but no stick input is being read at all.Be prepared to be told by their support that you need to order a third-party, unincluded adapter cable set from AliBaba/China and wait ages on shipping to try it again. Not available on Amazon.A useless and expensive paperweight, I'll be returning it as soon as possible.
Omar Lozano
2025-08-24 13:29:42
It is okay but pricey for being a knock off. It was very hard to get it to bind to my drone, there is a long list of adjustments and changes to the controls and parameters that need to be changed before operation. Battery drains quickly. Not compatable with other recievers. Limited accsessories. If you want to use it for a multicopter then i recommend another more compatible transmitter..
Motoguy
2025-06-05 14:35:21
I figured at this price point it would be hit or miss. Mine was a miss… I tried two different battery manufacturers with no luck. The screen didn’t work and I wasn’t able to access any menus. I will be getting a flysky like I should have the first time.
Al
2025-06-03 15:13:24
Linked right up to a R12DSM and works flawlessly. Everything works great so far but their are so many buttons, switches,levers,triggers, and dials that I couldn't tell ya if they all work yet or what they can do lol I like it.
Kris
2025-01-10 20:44:41
Great product!! Love it!!
Recommended Products
$14.50
$ 7 .99 $7.99
$12.59
$ 5 .99 $5.99