Your cart is empty.
Your cart is empty.Get the most control over your vinyl installation projects with Rapid Tac Application Fluid. A simple application of this fluid on any smooth surface allows you to more easily reposition vinyl and aids in the longevity of the wrap afterwards. Also included with this item is a Blue Squeegee, Yellow Detailer and 2 Felt Tips. Directions for use: Step 1. Clean surface thoroughly with Rapid Tac and a paper towel. Do not use other cleaners or solvents. Step 2. Spray surface again with Rapid Tac, peel backing off vinyl decal and place on wet surface. Step 3. Position vinyl decal. Use squeegee to remove fluid, working from the center out to the edges in all directions, ensuring all bubbles are pressed to the edges. Step 4. Wait approximately 90 seconds. Saturate paper cover tape or transfer paper, if any, with Rapid Tac, then remove paper tape. Wipe surface clean with microfiber towel.
Great product
2025-09-03 11:03:02
Works great
CLR
2025-06-11 16:57:43
I’ve been putting graphics on dirt bikes for many years, but always had a few bubbles here and there. I’ve tried Windex, soap mixtures, and other tricks of the trade. I have to say this is an amazing product and makes the job seamless. I definitely recommend a little bit of heat from a heat gun or hairdryer to help finish the process, but overall very pleased with the outcome.
Richard C
2025-05-19 18:22:18
This product not only does it clean well, but it makes your Vinyl application easier and more adhesive strength. Basically, after cleaning the, lets say the Hood, spray, wipe clean, then spray liberally over entire hood, this makes the vinyl slippery for ease of positioning the vinyl, without worrying about the adhesive on the underside of vinyl breaking down. Normally, most vinyl applications are supposed to be installed with a water/soap solution, which can lead to fogging, unwanted bubbles, etc.DO NOT USE ON TOP OF THE VINYL. Use water and dish soap mix of 75% water and 25% liquid soap. Hope this was helpful. A must for Carbon Fiber, 1pc. Installation.ðŸ‘😎✌
NexGen
2025-03-27 10:56:41
Not a huge deal, but didn't come with the spray nozzle as pictured. It just came with a childproof cap on top. You can probably snag a spray nozzle off of a household cleaning product and clean it out real good and use that, but still, it's an inconvenience and the picture shows a spray nozzle on it, so I deducted 1 star.
Eric Ross
2025-02-16 18:49:11
Great product at a great price, but either I did something wrong or it really didnt help me get done what I was doing in trying to wrap a few items
Bobby Creech
2025-02-09 10:25:28
Bottle of liquid was shrink wrapped with towels inside and shipped in an envelope. Envelope was not damaged, but the lid was not tight, so about half was gone, mostly contained in the shrink wrap and towels. Asked for replacement, got it, same way, only not as much leaked out so I gave it a try. I was using a brand name vinyl and transfer tape (but not the paper type) Followed directions and cleaned surface with spray. wet surface again applied decal, was easy to re position, but when it came time to remove transfer tape decal wouldn't stick to car. tried the door panel and glass. Tried letting it sit for 10 minutes, no go. I had to use razor to get decal off transfer tape and pat it down on car.
Steve
2024-12-24 15:27:26
GOOD DEAL
Recommended Products
