Your cart is empty.
Your cart is empty.Product Description
Sandy
2025-08-15 12:55:38
The template worked great for even & correct spacing to install drawer pulls & handles in the kitchen. The template aided with speed of completing the installation.
Andrea Greenhill @greenhillsathome
2025-08-07 16:37:26
The media could not be loaded.
Suzie-Q
2025-07-04 20:27:19
These made installing my cabinet & drawer pulls so much easier. Took a fraction of the time it would have taken measuring them out. Would highly recommend to everyone. A++++++++++
Je'Nay Gonzalez
2025-06-17 17:18:42
Love the template! It was perfect for installing the hardware on my kitchen cabinets. The drill bit that comes with it is terrible! Use your own.
Me
2025-06-14 13:49:31
Works just as described. This is our second one. The second one is easier to use and more precise. It has specific measurements for all types of handles or knobs. Great buy and a must have to install cabinet hardware.
John W.
2025-06-07 18:41:33
Very Handy - takes any guesswork out of installation. Just remember to adjust cabinet doors as level as possible at the door bottoms - supplied drill bit is a bit larger than screws - gives some adjustment for leveling handles across doors of wall-mounted cabinets.
Lala
2025-05-31 14:57:13
This tool made installing kitchen cabinet hardware an absolute breeze. takes the guesswork and uncertainty out of installation. line it up, put dots, drill, and install
Gerald in Denver
2025-05-20 10:14:25
Worked well. Pretty sturdy. Thought with plastic it may not be the case but if you take care they should last.My gripe is that the door template is not made for all handles. And I didn't pay attention enough to notice this. You can see on the photos that the round handles align with the bottom edge of the cabinet when they should be an inch or more above it. That was a bit annoying. My fault. My excuse is I was tired but that doesn't count. There's a really good video online of a gentleman with a white kitchen/cabinets using this set in a smarter way than I did. Use the drawer template for the doors. He does that and it's much better. Unless you have the square handles. That would be my advice. Either way plan this carefully.Otherwise really helpful was fast to get 29 drawers and cabinets done.I measured them all, first, then determined their center and wrote that down. Painter's tape on the drawer to mark the centers. Marked the holes with a fine sharpie. And, drilled away.The screws were all good. From the bag of screws you receive and the pairs that come with each handle only two screws failed. The ones in the bag that you can break off snapped to size easily but not so easily that it would be a stability issues. Just easily enough to break them with pliers.Someone else noted that the drill bit is poor. And I didn't want to believe that. But it is. Do yourself a favor and if you don't have one get a set from a brand name for $20 bucks or so and go to town. It's just really dull. Takes forever to drill the holes. The bit also splintered the wood. Normally I check for the needle tip and drill from the other side. This was not great. You can also mark holes on both sides and drill from both sides of course if you want to be really neat.The last thing I found is that it is helpful to mark the holes on the template you ARE using to have a clear visual of which you will use to mark the doors and drawers. Little white duct tape or something.Great set. Few shortcomings. I'd recommend it.
Juan andres almada aleman
2025-04-07 15:21:53
Las agarraderas me quedaron bien. Me gustó lo práctico que es. Gracias
SUSANA BENEJAM
2025-04-02 13:05:49
Va bien
Richard Halverson
2025-02-24 17:40:49
Awesome
Daniel Andréa
2025-02-19 10:21:56
Très facile d’utilisation avec de nombreux gabarits de perçage . J’ai utilisé l’entracte de 128mm pour mes poignées de meuble de dressing. Tout est nickel , la pose est propre et d’équerre !
N.L.Bella
2025-02-08 18:34:54
Needed to drill to install kitchen hardware. Very easy to use.
Recommended Products