Your cart is empty.
Your cart is empty.Product Description
PURE COPPER CORE
Good conductivity & stability
12 VOLT POWER RED WIRE
To solve the problem, which OEM radio harness of your vehicle does not have an ignition wire,
EASY TO INSTALL
Without cutting any OEM wire
FLEXIBLE SHELL
Security
Michael Freeman
2025-08-27 18:55:47
Car stereo installation wiring harness works great makes it easy to install car stereos
rickey Todd jr
2025-08-19 10:49:56
What to know is that the factory harness in the truck has not accessory power wire so the jumper that comes with this harness is very I'mportant tie all wires in to new harness besides the red wire on new harness you will jump this wire from an accessory wire coming from your ac control panel. You will need a volt meter to find the wire you need start by checking with switch off for a constant which will have 12v with switch off than turn switch on and hunt for another wire that reads around 12v this will be your jumper wire. Hope this helps.
M. A. Botha
2025-08-03 15:38:25
Does what it’s meant to do.
Skylar Peters
2025-07-22 20:53:38
Didn’t work for 2004 Pontiac Montana due to certain wires not being lined up with adapter may work for other models though.
Matt L.
2025-07-08 12:22:20
This did NOT convert the 2004 GMC Canyon factory harness to fit our new BOSS stereo. It was a waste of money. I blame Amazon as much as RedWolf, since Amazon said it would fit the vehicle and recommended it.
Christina Stephens
2025-06-17 16:48:32
Works great easy to use and install seems like the connection is good great price
Rhett
2025-06-14 18:33:31
So, for all intensive purposes, it works. Harness connector fits the factory plug, speakers are correct, power is correct, but the factory wiring does not have a 12v acc wire present, and you gotta have that for the unit to power up. This won't be an easy job for a beginner, and it was a bit of a pain for me, and I'd consider myself intermediate. The broken English in the instructions doesn't help...at all. A little research, and I found what I needed...which required a trip to the big box home improvement store. It started feeling like a "free" puppy $50 later.You're going to need a voltmeter, something to jump off of your fuse box (make sure you don't jump off of anything necessary for vehicle operation, and don't jump off of something that is continuously powered,) a little ingenuity, YouTube, anger management courses, NyQuil (so you can sleep at night and not think about why your radio isn't working,) lots of beer, and a strong vocabulary of curse words.Once you've ran that wire, it will attach to the red acc 12v wire from your new unit's harness. If you wired everything properly, you will have a working unit.You can search YouTube for "acc wire from fuse panel," and you should find what you need for that.I also ended up using a previously installed XM radio acc wire because the one supplied was too short. That's also why you'll need anger management courses.Keep in mind, no matter what harness you buy, you'll have this problem. This isn't an error on Red Wolf's part. But their instructions were garbage, and helped zero.Hope this helps, and be sure to just go ahead and get about 20-25 ft of similar gauge wire for your acc from the fuse panel. It's cheap, and it's better to have too much than not enough.
Jeramiah S.
2025-05-27 17:34:05
To say the least everything was quality, the hard part was bypassing my factory amp with Staples and four jumper wires lol trying to find a pinout and a wire scheme for a 2008 trailblazer with the Bose system and an amp is almost impossible hundreds of different forums but none are adequate enough to follow without cutting a few wires. With that being said the product works well.
Guido
2025-05-17 20:17:30
Saved so much time
Arthur
2025-04-02 18:39:07
The way to go when replacing a stereo. No cutting of the stock harness. Wire colours all lined up with my aftermarket Kkmoon deck.
A. Furlong
2025-02-12 17:22:31
Didn't fit my truck like it said it would! Very annoyed. There was no point in returning and getting it changed as it would just take more time and money. Should just be taken down as it doesn't fit the stuff it says it does!
Dan S
2025-01-02 16:00:50
Used this to install a pioneer stereo into my 2005 sierra 2500HD w/ boseIt worked - but one of the wires (12v switched) was incorrect and comes from a second harness, which this didn't include. A wiring diagram would've been helpful, which is not included with the product.Everything else worked and was right, and the second harness only has 3 wires so it was easy to locate the one with switched power.
Cameron
2024-12-19 16:00:58
This wiring harness clips in perfect in my 2005 Pontiac Sunfire and the wires were pre stripped, can't wait to get my deck in!
Recommended Products