Your cart is empty.
Your cart is empty.Product Description
Maximum voltage: 300 V AC, 48 V DC,
Maximum continuous current: 130 A AC, 150 A DC.
The nut is designed as a washer, and the brass sheet as conductors have low resistance, conductivity and corrosion resistance.
The base is made of hard plastic, durable, and the protective cover is made of PC to prevent accidental electrical short circuit.
You will get:
A red battery bus bar,
A black battery bus bar,
4 x Mounting screws
10 x Ring terminals.
Scope of application:Suitable for automobiles, trucks, ships, boats, yachts, etc.
Troy B.
2025-09-02 16:50:35
when i recieved them i was surprised..... they are bigger than i thought they would be,,,,,,also better built, they are heavy duty enough to handle plenty of load for small to medium large wiring projects,,,, so, large ,well built, and strong enough to handle the torqe when wires are added and tighteneddown.... all in all worth the money and if i have need for a item like this then i will purchuce this product again
jsnm
2025-07-30 14:24:41
These worked good for my application needed to attach multiple power lines to one source. Hardware is decent just careful not to over tighten can strip easy.
Corsicalers2
2025-07-26 18:17:22
I bought this to use in my 1980 firebird that I did an LS swap in, I like having one distribution block to have all my main power wires running to!!! It made wiring my engine up a lot easier!!!
RB
2025-05-08 11:52:37
It's not bad for the price so I'm going to be picky because I ran into two issues with these. The bus bar is slightly recessed from the plastic along the edges and it can cause a problem. Ideally you want the terminal to have full contact with the bus bar and the raised plastic prevents this with larger lugs. Second issue is how the cap fits on. The way the cover is molded requires that your terminals on the ends are placed perpendicular to the block if you are using larger terminal lugs. These are probably the same as all the others but just be aware that they're not perfect. Still giving 4 stars.
Micheal Phillips
2025-04-29 18:40:26
Exactly what i needed for the Rzr. Fast shipping
Rankin Services
2025-04-07 17:53:31
Worked great, was able to clean up the wiring on my firewall.
Karl S. Coplan
2025-03-20 12:20:13
This works, but as other have noted, the nuts that both hold the studs in place and clamp down on your wire lug don’t make a great connection with the conductor plate. You can fix this with extra nuts or washers.
Terrell
2024-12-23 13:51:13
They are a solid product. my only misgivings are that they lack a second nut per attachment point for the wires and the bolt moves in and out during the process of attaching your wiring. I mounted mine to the wall behind my desk to attach power leads from various radios, and struggled a little due to the bolt becoming floppy when loosened. Once the wire is attached and the nut again tightened it does become steadfast. I am still happy with the product just suggest that they include a second nut per attachment bolt.
Recommended Products
$38.00
$ 16 .99 $16.99