Your cart is empty.
Your cart is empty.Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to control every step of the manufacturing process guaranteeing a superior product that you can rely upon. Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2000 degrees-day after day, week after week, year after year. For over 10 years Remflex have been bringing this technology to automotive enthusiasts of all kinds to eliminate exhaust leaks for good. Experience has shown that no gasket should be reused if you want a reliable seal, therefore Remflex do not sell or market gaskets as reusable even though it have been told that they have been reused successfully in the past. Do not use sealants of any type with gaskets. The sealant burns out rapidly leaving a gap which creates an exhaust leak. Remflex Exhaust Gaskets are good to 3000 degrees which far exceeds the temperature rating of any sealant.
FrequentShopper
2025-08-22 16:32:17
Be very careful, these break easily. Fit perfect. No issues, no leaks, no re torque needed as advertised. They will tear very easily, use gasket maker to repair if needed.
Jason N.
2025-08-19 13:53:42
I've used Remflex exhaust gaskets in the past with great experience. I bought them this time for a header installation on a 5.7 Hemi. I was skeptical about shipping since my postal service like to fold important gaskets in half to shove them in my mailbox. This seller took GREAT CARE in packaging so they did not get damaged in transit. Thank you much!
RHS
2025-04-23 14:59:40
I have a set of no-name Chinese stainless headers on my 5.7 HEMI. They were inexpensive and not bad quality overall, but one of the flanges was warped beyond the sealing ability of a normal gasket. I could have had a machine shop mill the flange, but it might warp again, and the cost would be more than the price of the Remflex 6022 Exhaust Gasket. So I got a set and they did the trick. No more exhaust leak, and no more O2 codes. They get my recommendation.
Jon H.
2025-04-14 11:57:37
These gaskets are extra thick and conform to irregular nicks and scratches on gasket mating surfaces. They work great at sealing up the exhaust and eliminating those annoying ticking exhaust noises.
Eric
2025-02-17 10:00:52
only complaint is the set I got were almost split from being bent, which will ruin these types. Likely it was only starting to leave a seam where it would likely be trash. Installed them but hopefully I won’t have a future exhaust leak.
Jesse Winkler
2025-02-09 17:50:30
I cant say enough about this gasket. First off ive never seen one so thick and with so much "squish". After removing the manifolds to repair the dreaded 5.7 broken bolt tick I was able to remove all but one broken stud. The last broken stud decide to fight me for 4 hrs before it snapped the tip of my stud extractor off and lodged it dead center in a recessed stud. I fought for several hours before having to admit defeat and needing to get my vehicle back together for work. I decided to install it minus the one stud. I torqued everything to remflex manufacturer spec and fired it up...absolutely zero tick or leak of any kind. Several months later now, still zero complaints!!! I wish I knew about these guys years ago when I used to fight repeated header leaks!!
jonathon smith
2025-01-21 12:52:03
The media could not be loaded.
james wells
2024-12-14 12:30:25
first item shipped was damaged. but after contacting seller the item was replaced in no time. great product great seller!!
Recommended Products
