Your cart is empty.
Your cart is empty.Product Description
Specification:
- Rating voltage: 5V
- Rating current: 1A
- Each LED strip length: 0.5m
- Total Weight: 15g
Package included:
- LED controller * 1
- LED Strip * 2 (one red and one green)
- Y cable * 1
- User manual
RikDog
2025-09-07 11:29:46
Easy to install and work great. I put these on my flying wing and they have not come off yet. The wing does about 80 mph and now I can see it later in the day. They are not bright enough to see at altitude during the middle of the day, but when it is overcast or getting later in the day, they increase visibility tremendously.I put a set of the blue ones on the bottom of the wing and when I do high speed corkscrews the lights really add to the effect.
Customer
2025-08-30 15:06:10
Thanks looks great Works great also
STS 51
2025-08-14 10:33:58
The lights are nice and bright, but the second unit I purchased would not light up at all.
Darrel Abbe
2025-07-28 13:54:09
I plugged this Light kit into Channel 6 of my SPEKTRUM AR631 receiver in my AeroScout S1.1 RC Plane and it works PERFECTLY by pushing the SAFE/PANIC button on my DXS Transmitter. It will change modes by clicking the SAFE/PANIC button, experiment with the settings by pushing it repeatedly OR SIMPLY push the button on the little circuit board that it comes with to the light setting you want and ONE CLICK of the BUTTON ON YOUR TRANSMITTER will turn it ON AND OFF. It REMEMBERS your last MODE SETTING which makes this SUPER FUN AND SIMPLE TO USEI left the lights on for 30 mins. even though my plane battery will only allow 10 mins. of flight just to see if the SWITCH CIRCUIT BOARD got hot from using power. I could feel ANY HEAT, it was as if it was not turned on and cool normal to the touchThanks to the SELLER FOR THIS SUPER EASY TOTALLY COOL LIGHT KIT !!!
James PJ
2025-07-03 12:17:41
I used two of these for scale flashing wing tip strobes on my radio controlled FMS 1500mm Cessna 182 model airplane. IF you have that model aircraft this set works well for both wing tip strobes. Just cut the wires to each strobe and solder the small board in line. The board is labeled "in" and "out, " and tiny button selects what you want the "strobe" to do.
John C.
2025-06-07 16:18:46
These LED stripes are essential if you are flying at night and to be able to see where your airplane is flying and what position it is during night flying.
Customer
2025-05-07 16:13:48
Works great. Easy to use. Good value. I tried to defuse the light by covering it with heavy white paper, but the lights still show as individual lights, so its ok, fine.
bthrow
2025-05-05 12:39:03
Lights work fine. Bought them for my Areoscout and as others have said channel 6 on the AR631 receiver and bind button to toggle modes and switch on and off. Simple enough. I’d just add that when double clicking the bind button to change modes it will give you a quick preview and turn off until you single click the bind button again. No big deal since I discovered this on the ground and not in the air. So easily toggling around in flight uninterrupted isn’t great if you are counting on them. But that’s why I say it’s a fun novelty item. I wouldn’t rely on them for any sort of navigation. I mounted mine between the CG and underneath the leading edge of the wing. Perfectly visible flying level but will disappear during banking turns. Fine at dusk to extend field time a little but not much else. I might move them to the fuselage and try that. I didn’t bother with the adhesive strip on the LED’s and used clear packing tape just in case I wanted to move them. Don’t know how well that adhesive stuff would stick anyway since it looks pretty questionable. One last thing is I didn’t notice any changes in performance as some have mentioned. The plane flew just as well without them. For the price it’s fun to have and a couple walking in the park got a chuckle. Considering how easy installation is if you manage your expectations they’re fine.
Kunde
2025-05-04 20:45:01
Funktioniert super und ist schön hell. Die LED‘s werden etwas warm aber kein Wunder bei der Helligkeit :)
Mr. Clean
2025-03-30 17:42:58
a l'air en bonne état, mais ne peut testé avant quelques semaines, le temps de construire mon super clod buster !!
H. Hogan
2025-02-17 10:13:29
All the lights work, when they wnat to... Hooked them up on a plane and when plugged in they all came on and switch worked too, but shortly after they seemed to develop a mind of their own and only light up internitantly and soemtimes stay off the entire flight, nothing I did with my transmitter or the switch changed anything. So they work, just when they want to. If your flying at night relying on these would be a bad idea.
marcel
2025-02-08 15:56:25
these are great LEDs for any RC controlled vehicles. plus directly into a pwm rx of any kind, or can be soldered up to anything that gives off up to 5volts of power. Great for my fixed wings and rc trucks. I highly recommend these!@
AWD Turbo
2025-01-10 18:44:40
Pretty decent bang for your buck. They don't do so great under trucks. Gravel etc will break them eventually. But great brightness and the different functions were neat.
Recommended Products