Your cart is empty.
Your cart is empty.Product Description
RIDGE WASHER: Focus on Pressure Washer Attachments.
At RIDGE WASHER, we make cleaning effortless and enjoyable with our high-quality pressure washer accessories.
Our mission is to offer effective cleaning solutions that save you time and energy, while ensuring superior performance.
Whether you're a homeowner or a professional cleaner, we're committed to providing products that save you time and energy while ensuring superior cleaning performance.
Choose RIDGE WASHER for high-quality, convenient cleaning.
Feature
- Orifice size 1.1 mm, Male NPT screw fitting, about 1/4 inch.
- Working Pressure is up to 3000 PSI.
Feature
- Orifice size 1.1 mm, Male NPT screw fitting, about 1/4 inch. Working Pressure is up to 3000 PSI.
- If foam cannon works not very well as before, maybe orifice tip damaged or blocked. You can replace with new one and it will recover.
Feature
- Universal orifice nozzle to generate thick foam inside foam cannon, 2-pack
- Include 2 pieces of high replacement foam generator nozzles for snow foam lance. Made of brass, work durably in the foam cannon.
Anthony Espo
2025-09-04 14:55:55
The RIDGE WASHER 1.1 mm Foam Cannon Orifice Nozzle is the real MVP of my car wash routine. This little brass beauty delivers that thick, creamy foam we all crave. It’s like a snowstorm in a bottle!With a tighter orifice, it’s all about that white goodness – my car has never looked so clean. The universal fit and easy replacement make it a breeze to use. Plus, with two in the pack, I’m always ready for a foam party.If your foam cannon isn’t foaming like it used to, just swap in one of these bad boys, and you’re back in the game. At up to 3000 PSI, it’s a pressure washer’s best friend. Highly recommend for anyone looking to up their foam game!
Vince
2025-09-01 17:40:49
I installed one of these 1.1mm jets in my Armor All cannon and now the foam cannon works great. Before changing the jet, the foam cannon did work but the foam was too runny. After installing the replacement jet, the foam is thick and clings to the surface of the vehicle as it should. I use TW Hybrid Solutions Pure Wash with my cannon and it sprays on thick like a shaving cream now thanks to this 1.1mm jet.Pros: resolved runny foam problem, use less wash solution, brass, easy to install, dramatically increased dwell timeCons: none
Gary B.
2025-08-07 16:52:02
These were recommended for my foam cannon and they work great!
CANDODAD
2025-08-01 12:56:07
Excellent machining and orifice within tolerance. In addition, good price vs quality of this item.
Future Millionaire Trader
2025-07-27 13:58:26
As we all love our cars, it is our duty to make sure we keep them clean and shiny throughout its lifetime. We all know the best way to do that is by buying a FOAM CANNON and creating tons of foam. Now unless you purchase an expensive pressure washer with great PSI + a nice foam cannon (and soap), you may not get the foam you were expecting. It takes precise measurement of water to soap ratio as well as a few other factors to get that "professional grade" foam.Well, an easy mod / hack to get that great foam quicker is to change the stock orifice that comes with your foam cannon with this 1.1mm orifice. This will provide you thicker foam without changing anything allowing you to dial in your measurements / using cheaper equipment. I definitely recommend this mod to anybody who does have a foam cannon as it makes a great difference.
Randy
2025-07-20 18:41:50
Worked just fine as described
seoulfull
2025-07-06 11:15:48
I bought this to use with my two Foam Cannons for washing my cars. Where I live the water is extremely hard and currently own an electric pressure washer that says its rated at 1.8 GPM & 3000 PSI but I highly doubt it. One of my foam cannons is a cheap one I got for around 18 bucks and the other is one is a torq that is much better quality and was around 70. After playing around with many different foaming car washes & changing up my set up in little ways I was able to go from runny, watery (yet slick) foam to thick suds and this little guy made all the difference. For around 6 bucks, you can't go wrong! After fitting this smaller orifice in my foam cannon, using distilled water in it, buying and using $25 hose spigot filter, and my fav shampoo/soap to water ratio... It literally changed my Car wash/detail game! TBH, this little addition was the real game-changer (especially in my cheap foam cannon). Even people passing by noticed, LOL. As soon as I made the change, people came up to my driveway asking me what soap/machine/contraption I was using and how my car wash looked like "that". With all that being said, I normally wouldn't go on and on about something like this but I'm so happy I found this and it makes all the difference, especially going through so many combinations of shampoos and trouble with my hard water and my sucky pressure washer. I feel your pain if you've got the lubrication and slickness from your shampoo but want super thick suds to actually stay on your car long enough to wash properly, try this! you wont regret it!
jagdeep ladhar
2025-07-04 12:13:47
Replaced on my washer gun, now it gives perfect foam everytime.
Ernesto Bandala
2025-06-16 14:43:20
Esta herramienta logró transformar la espuma de mi cañón de espuma de una consistencia más lÃquida de la esperada a una que logra permanecer varios segundos pegadas al auto, sin duda alguna permite gozar de un cañón de espuma de la forma que dejerÃa ser utilizado.
saud
2025-06-11 18:09:52
The bestttt
Giuliano
2025-06-10 12:40:33
You really see a difference with this adapter
David B.
2025-05-29 18:24:57
Used with an Eclipse foam cannon from Repco, a typical example of these snow foam adapters that all seem to be the same basic design. This one requires a pressure washer capable of between 2000 and 5000 psi, so well in excess of the cheap consumer units most people have. The smaller orifice jet from Black Ridge makes the Eclipse entirely usable with a humble 1600 psi Karcher K2. Excellent product!
Anthony Espo
2025-05-25 11:02:03
The RIDGE WASHER 1.1 mm Foam Cannon Orifice Nozzle is the real MVP of my car wash routine. This little brass beauty delivers that thick, creamy foam we all crave. It’s like a snowstorm in a bottle!With a tighter orifice, it’s all about that white goodness – my car has never looked so clean. The universal fit and easy replacement make it a breeze to use. Plus, with two in the pack, I’m always ready for a foam party.If your foam cannon isn’t foaming like it used to, just swap in one of these bad boys, and you’re back in the game. At up to 3000 PSI, it’s a pressure washer’s best friend. Highly recommend for anyone looking to up their foam game!
Vince
2025-05-22 15:25:31
I installed one of these 1.1mm jets in my Armor All cannon and now the foam cannon works great. Before changing the jet, the foam cannon did work but the foam was too runny. After installing the replacement jet, the foam is thick and clings to the surface of the vehicle as it should. I use TW Hybrid Solutions Pure Wash with my cannon and it sprays on thick like a shaving cream now thanks to this 1.1mm jet.Pros: resolved runny foam problem, use less wash solution, brass, easy to install, dramatically increased dwell timeCons: none
Gary B.
2025-05-21 16:34:38
These were recommended for my foam cannon and they work great!
CANDODAD
2025-05-17 20:29:23
Excellent machining and orifice within tolerance. In addition, good price vs quality of this item.
Future Millionaire Trader
2025-04-26 16:52:23
As we all love our cars, it is our duty to make sure we keep them clean and shiny throughout its lifetime. We all know the best way to do that is by buying a FOAM CANNON and creating tons of foam. Now unless you purchase an expensive pressure washer with great PSI + a nice foam cannon (and soap), you may not get the foam you were expecting. It takes precise measurement of water to soap ratio as well as a few other factors to get that "professional grade" foam.Well, an easy mod / hack to get that great foam quicker is to change the stock orifice that comes with your foam cannon with this 1.1mm orifice. This will provide you thicker foam without changing anything allowing you to dial in your measurements / using cheaper equipment. I definitely recommend this mod to anybody who does have a foam cannon as it makes a great difference.
Randy
2025-04-22 12:09:52
Worked just fine as described
seoulfull
2025-04-05 15:20:37
I bought this to use with my two Foam Cannons for washing my cars. Where I live the water is extremely hard and currently own an electric pressure washer that says its rated at 1.8 GPM & 3000 PSI but I highly doubt it. One of my foam cannons is a cheap one I got for around 18 bucks and the other is one is a torq that is much better quality and was around 70. After playing around with many different foaming car washes & changing up my set up in little ways I was able to go from runny, watery (yet slick) foam to thick suds and this little guy made all the difference. For around 6 bucks, you can't go wrong! After fitting this smaller orifice in my foam cannon, using distilled water in it, buying and using $25 hose spigot filter, and my fav shampoo/soap to water ratio... It literally changed my Car wash/detail game! TBH, this little addition was the real game-changer (especially in my cheap foam cannon). Even people passing by noticed, LOL. As soon as I made the change, people came up to my driveway asking me what soap/machine/contraption I was using and how my car wash looked like "that". With all that being said, I normally wouldn't go on and on about something like this but I'm so happy I found this and it makes all the difference, especially going through so many combinations of shampoos and trouble with my hard water and my sucky pressure washer. I feel your pain if you've got the lubrication and slickness from your shampoo but want super thick suds to actually stay on your car long enough to wash properly, try this! you wont regret it!
jagdeep ladhar
2025-03-26 13:48:10
Replaced on my washer gun, now it gives perfect foam everytime.
Ernesto Bandala
2025-03-25 16:16:11
Esta herramienta logró transformar la espuma de mi cañón de espuma de una consistencia más lÃquida de la esperada a una que logra permanecer varios segundos pegadas al auto, sin duda alguna permite gozar de un cañón de espuma de la forma que dejerÃa ser utilizado.
saud
2025-02-18 17:17:12
The bestttt
Giuliano
2025-02-08 13:58:40
You really see a difference with this adapter
David B.
2025-02-05 14:00:21
Used with an Eclipse foam cannon from Repco, a typical example of these snow foam adapters that all seem to be the same basic design. This one requires a pressure washer capable of between 2000 and 5000 psi, so well in excess of the cheap consumer units most people have. The smaller orifice jet from Black Ridge makes the Eclipse entirely usable with a humble 1600 psi Karcher K2. Excellent product!
Recommended Products