Your cart is empty.
Your cart is empty. DINSE style connection.
2pcs EDKL10-25 200A Euro Style Cable Connector
2pcs DKJ10-25 200A Euro Style Cable Connector
Craig
2025-08-31 10:12:59
Needed to make extensions for welder leads for a 225 amp stick welder. These were the same size as the panel plug on my Harbor Freight welder (100 - 200 Amp connector - Harbor Freight doesn't overbuild anything). Worked perfectly with 4AWG cable and were very easy to assemble. The rubber boots are keyed, and the keys are marked on the face. I assembled the male ends first, then the female ends so did not mix up the rubber boots, as they are different.The sleeves allowed me to use cables with exposed and mashed ends with very little effort - without the sleeves I would have had to cut off the mashed end and cut back the insulation to get the four gauge cable into the socket. Took a matter of minutes to assemble. Very pleased.
James S. Hancock
2025-08-09 09:27:51
Works and fits well. I was able to install on #2cable.
Adam
2025-07-30 11:30:24
Bought these to add a 1500W inverter on my 06 Prius. I wanted the inverter to be able to quick disconnect that way I can move when not in use.They worked well, the only problem with the product was the crush pins to hold the wires just fell out after being crushed, it worked just fine with just screwing the tap screw straight onto the wire.The only other thing that didn’t work well for me was it doesn’t have a cover so if you disconnect it but still have juice on it you basically have a tiny pair of bad jumper cables.
Prof100
2025-07-26 12:25:08
Good value. Solves making the ground cable longer than the 16 foot plasma torch. The stock ground cable is 7 foot. Worked perfectly for making an extension cord for my CUT50 plasma cutter. Assembled the ground cable using Dielectric grease to prevent corrosion over time.On the male end of one connector the rubber cover would not lock in position so I used some Loctite poly seal to retain it. This stuff goes on white and dries clear. It is an excellent sealant and bonding agent.Black Electric Tape was added to seal up the cable to the covers.
Hans471
2025-07-21 10:40:18
Very good price. Worked perfectly for me to put together an extra set of extension cables for my plasma cutter and welder. Easy to work with, seem well made and they fit both my machines perfectly. What more can I ask for? Yes, I would buy them again.
John`
2025-07-06 17:04:28
These adapters fit better than the ones that came with the machine. good buy
Penny M. Forney
2025-06-21 18:22:40
Dad used it, so must have worked.
Me
2025-06-05 17:56:17
1 of them cracked when torqueing the set crew but I probably over did it
ayanokhoji
2025-05-23 15:53:16
å¤ã„ディーゼル溶接機ã®ç‚ºã‚¯ã‚¤ãƒƒã‚¯ã‚³ãƒã‚¯ã‚¿ãŒæ¬²ã—ãã¦è³¼å…¥ã€‚普通ã«ä½¿ãˆã¾ã™ã€‚
ISAIAS
2025-05-15 12:00:48
Buen Producto cubre la necesidad que esperabaGracias
Solena
2025-04-18 19:44:50
Perfect, exactly as advertised and Excellent Quality, I also ordered the same ones but in the 18mm size and they too were perfect and exactly as advertised, they fit into all Tooliom tools and plasma cutters. what i used my sets for was one set converted from an 8mm to 13mm and one vise versa so I can share leads for grounds and I can use my Lift TIG torch on my larger welder. they are awesome and made of excellent quality will buy again if i need more.
Izzy
2025-03-01 16:30:38
I did work with this kind of connector before.They are good quality. I’m happy with it.
ãŠã‚Œã‚“ã˜
2024-12-27 17:21:30
é…é”ã—ã¦ãã‚Œã¦ã“ã®å€¤æ®µï¼ã„ã„ãï¼
Recommended Products
