Your cart is empty.
Your cart is empty.keith
2025-08-25 11:47:25
I looked everywhere for this kit for a Dodge dart NOTHING.. dealership said there's no rebuild kit & its $500 for a new vacuum pump... i said 🤣👋....then seen this kit for a jeep with same motor 🤔ðŸ˜ðŸ‘..no more oil leakðŸ˜
Werners Elite Automotive
2025-08-03 17:55:00
We use these exclusively and have great service from them. Thank you!
Customer
2025-07-13 16:34:46
Bought this to fix a leak with the vacuum pump to block seal.After replacing old seal leak was just as bad.Bought the actual Fiat part - leak was fixed.The factory part has a coating on the engine side of the gasket that the RKX part did not.Did not need or use the other parts.
richard marquard
2025-06-19 10:38:43
Perfect o ring to fix the oil leak on my 2012 Fiat 500 vacuum pump. Tho I should note that this is an o ring, not a square cut seal like the one that came out. Sure beats having to buy a $500 pump
STEWART JAIME PEREZ
2025-05-10 14:24:55
This pump is nothing special inside, you just need change the o rings , use silicone for oil (special for oil) to the gasket with the block.
Ender Contreras
2025-04-15 14:57:47
Excelente lo recomiendo
Julio Medina Morales
2025-04-04 12:37:57
Funciona muy bien.
Alvaro Cantu
2025-03-29 18:38:48
The main seal gasket doesn’t work well, this is the second set I bought but neither really work on fixing the oil leak, I have to get a better gasket from my local parts store to get a good quality gasket.
omar de leon
2025-03-18 12:53:56
La pza original Vacumm bump no es similar al remplazo, la original es de forma cuadrada y la de remplazo es de forma de O-ring, no le quedo a la bomba de vacio, por el contrario tuve problemas, dinero tirado.
Chrrris
2025-02-13 14:24:01
Great product. Worked a treat for me and fixed a leak from metal gasket on the vacuum pump (which I think was caused by a garage doing a timing belt change in the past and re-using the old gasket -- they are single use gaskets). Much cheaper than buying a new pump.Be careful when re-assembling the pump. Make sure it spins freely by hand before re-attaching it to the engine block and make sure the pump input is fitted snugly into the connector on the end of the camshaft.
Recommended Products