Your cart is empty.
Your cart is empty.Product Description
Flexible Shaft Grinder Carver Rotary Tool
Strong Power
The powerful 780W motor turns bits at high speed to deliver the performance you need for various tasks.
Air Hose
Air outlet helps radiating, prevent machine burn.
Flexible Shaft
Metal flexible shaft features good extension for precision work. Soft, durable and heat-resistant, ensures long lasting service time.
Pakcage list
1x Chuck key 2x Carbon brush 8x Sanding bands 6x Sanding disc 9x Grinding heads 2x Sanding tape connect rod 1x Slice rod 1x Flex Shaft Grinder
Chuck Key and Foot Pedal
Included Chuck Key
Chuck range: 0.4-6.5mm
Why we choose plastic pedal?
Steel material may vary the speed more obvious, but steel material will conduct heat and easily hurt user. After exploring many times, we decide use plastic.
The plastic electronic pedal design ensures safety and prevent heat and leakage of electricity.
Adjustable the foot pedal
If you feel the speed adjustment is not very various, there is a screw on the pedal to adjust the constant speed and rotating speed.
Wide Application
Multi-use rotary tool for cutting, sanding, polishing, drilling, burr removal and more
Greg F.
2025-09-06 12:59:50
Update: May, 2022. I have used this tool probably about 8 times now since I purchased it. As I mentioned, because of reviews I’ve read I used fishing reel grease to lube the cable because of breakage. Yesterday I was using the tool and the shaft broke right at the connection to the motor. I have been extremely careful with the shaft and have always extended it so there was no pressure on it from binding. Well, it broke anyway. The company I purchased this from included an additional shaft, most likely because they are aware of the problem. I will be contacting them to find out what to expect from the new shaft and future support. It really is a good powerful motor and the head works well. I just hope that I won’t have to be continually replacing shafts to use it.This rotary tool is very powerful and has worked great so far. I took the flexible shaft apart and used some fishing reel grease to lube it up. I did this because of the many reviews for many of these brands that talk about the flexible shafts failing. It’s a really important step in my opinion to keep these shafts healthy. It’s also important not to bend the shaft at too sharp of an angle. This causes friction and resistance which can cause undue stress. My set up came with an extra internal shaft which is great in case of failure. The tool head works well and is comfortable in the hand. My foot peddle has a good range of speed but if yours doesn’t I understand there is an adjustment you can do to fix that.
Jacob S.
2025-08-26 13:00:03
Great, quality machine. This is the kind that will last you a lifetime if properly cared for. If you use your rotary tool often, this is worth the money. It has the power you need, and won't break down on you. The chuck is fantastic, lets me use all sizes of bits, and holds them securely. It does get a bit warm as you use it, but that's just how rotary carving works. Give it a few seconds to cool down if it's too hot on your hands.I've seen complaints about the foot pedal. It is indeed cheaply constructed, but I've used it quite a bit in the past six months and had no issues with it. I do recommend unplugging the carver when you're not using it, because if you're like me, you might tend to accidentally step on the pedal.
BookCritic
2025-08-24 12:00:20
Not sure what happened with the people that gave this a low rating but there were two main complaints I saw before I bought this:1. The pedal control didn't work well2. the internal drive shaft of the flex cable brokeWell, I just unboxed mine and tested it out. The pedal works fine and DOES produce variable speeds. For those of you that had a problem with this, there is an adjustment screw. The pedal is nothing more than a switch. So no problems with that.I haven't used this for long so take this for what its worth, first, the company shipped this with an extra drive shaft in case of a break. Second, I ground down some metal bars, sharpened a knife, sanded some plastic, and used on various other surfaces. No problems, the thing works great and all my Dremel bits fit.I did buy this bundled with some other recommended products; some grinder bits, and a stand to hang it on. I have a complaint about the recommended stand.Whoever paired this hanging stand with this rotary tool obviously did not have the dimensions of the motor. The hook on the recommend stand was way to small and is worthless. This motor has a lot of torque and it falls right off this hook that doesn't quite get a good purchase on the hardware of the motor.I recommend that you get this tool first, then figure out how you will hang it.I am very satisfied with this product so far, its quiet, its strong, and it works and it was very reasonably priced when you compare to a Dremel tool at your local hardware store.My recommendation is "buy"
mike parker
2025-08-17 14:35:56
Works great thanks
Dan Widener
2025-08-11 11:02:05
I have been using this little grinder pretty regularly for over a year now and haven't had any problems at all. It does exactly what I expect it to do, the chuck is strong and I haven't had any slips. The motor is plenty powerful and I love the foot pedal control, although in my small office workshop, it can sometimes get in the way, but that is my problem not the devices. I do find that even with larger hands, this one is a bit on the wide side to grip. I am not saying it is huge or uncomfortable, but just maybe a bit awkward. Rather than designing it like a pen, it feels like I am holding a small mag light. Regardless this is my only real complaint and it is small in the grand scope of things. Happy they included an extra flex shaft, although I haven't needed it yet, at some point, I am sure I will.
Never received
2025-06-09 13:38:53
Bought this as a go to with my Dremel, it worked great for 8 years, just got same type so now I have 2 rotaries and new motor. This machine was tough only replace the bolt to spin the rotary tool once from a very nasty snag that sheared it. Just screwed in new one and good to go. And, i replaced the bushings twice in the course of it's life. Recommend this company for a good inexpensive rotary tool.
B.Park
2025-06-03 15:34:03
Lot's of power for those pesky grinding jobs !
Dr Ray Dewey
2025-05-06 10:13:34
the motor has lots of power. I use course kutzall burrs and have not had any problems with motor stalling. The foot switch allows handsfree operation, left hand holds the wood and the right does the carving. The motor has good torque and requires a sturdy hanger to keep motor steady.
Customer
2025-01-22 12:22:08
Having it hanging is a good idea, all the torque can cause it to move.
Alexander Scutaru
2024-12-08 15:29:30
quick snap removable head great. Would love if it would fit wider shafts as well.
Dennis Dyck
2024-11-24 11:54:28
Seems to work as it should. Still to spend more time using the product to determine longevity
Recommended Products