Your cart is empty.
Your cart is empty.Product Description
The prototype stepper motor 42 stepping motor (1.8°). The steel cup has high precision, large carrying capacity and long service life.
A timing platform with stepper motor and RS232 interface for easy connection to motion controllers.
Standard stepper motor and DB9 interface, choose controller flexibility, so we can provide a fully customized motion system.
Product description
The limit function and zero function can be added. The stage can be used vertically or assembled with other stages. The servo motor can be replaced according to requirements.
Fine grinding worm drive, comfortable movement, backwards can be neglected, the motor is connected with the worm through a high-quality elastic coupling, synchronous drive without noise.
Dash the outside of the platform to easily read the scale.
Kierie Aramayo
2025-08-04 15:01:12
Sounds like R2D2 when I push a fast stepper acceleration and its the most beautiful sound I ever heard.
Bryan Pantoja
2025-07-19 15:11:03
I connect it to a driver and control it with a Arduino uno use c plus coding the motor paired with a button. I want it to rotate in only 1 direction and stop but each press of the button it reverses direction randomly not following protocol.
thanu
2025-07-17 16:38:08
The base is a bit bulky. Hard to mount it on other movable bases. But it does provide good stability
drew
2025-04-15 15:06:25
No issues. Works well.
Nicholas Cox
2025-03-16 11:01:29
Nice motor, but cannot find pinout for home/zero switch!!
M. Vanstone
2025-03-05 14:27:37
This little motor unit is compact and sturdy. Simple to use. It's a nice touch that the 'home' sensor is built in instead of a value add.For those that are interested the stepper pin out on the DB9 connector is as follows:Pin 1(+) - 4(-) = Diode Vf = 2.57V (suspect this is LED emitter)Pin 4(+) - 5(-) = Diode VF = 795mV (suspect this is a photodiode)Pin 6 - 7 = motor winding 1A/1BPin 8 - 9 = motor winding 2A/2B
LB
2025-02-07 13:01:35
This works well seems torquey, not sure what the max feed rate is. Opened up the motor and soldered my own leads. The only thing connected is the motor, nothing else.
Recommended Products