Your cart is empty.
Your cart is empty.Product Description
High Quality EPDM Rubber U Channel Edge Trim
EPDM rubber have much better resistance to heat, light, and ozone than unsaturated rubbers such as natural rubber, SBR, or neoprene (polychloroprene). This makes it suitable to be utilized in external harsh environments and can be used outdoors for many years or decades without degradation. Our U channel Rubber Edge Trim can be widely used in automotive, chemical, instrumentation, machinery and daily necessities. For example: edge protection or sealing of furniture, electronic appliances, fish tanks, car doors, gas stoves, roofs, shelves, stairs, cabinets, barbecue grills and other equipment.
We Also Have Other Self Adhesive Black or Clear Color Rubber Edge Trim On Sale, Please Click The Photos As Below To Reach Them Directly:
Multiple Usage:
DIY Sheet Metal Products
Cabinet or Steel Boxes
Car Doors
Steel Tiles
General Information
Size:
Slot-1/16"
Wide-3/16"
High-13/32"
Fit for: 1/16" to 3/32"
Thermal properties of EPDM
Coefficient of thermal expansion, linear: 160 µm/(m·K)
Maximum service temperature: 212F
Minimum service temperature: −40F
Mechanical properties of EPDM
- Hardness, Shore A: 30–90
- Tensile failure stress, ultimate: 17 MPa (500-2500 PSI)
- Elongation after fracture: ≥ 300%
- Density: Can be compounded from 0.90 to >2.00 g/cm3
How To Install The Gasket
Step 1- Clean The Surface
Step 2- Apply The Glue
Most of the Super Glue is available for our edge trim. Available Super Glue models example: #403, #460, #495, #502, #808.
Step 3- Cut The Rest of The Gasket
ral
2025-09-03 14:35:28
Worked. Used on an opening I cut in a piece of .040 aluminum.
John J.
2025-08-27 16:48:49
Excellent, great price.
Michael L
2025-08-24 17:00:19
Good material, flexibility easy installation.
Mike
2025-08-14 13:33:56
I used this on a drill press. The lid where the belts are located vibrated loudly. It was metal on metal. This rubber fit perfect, on lower edge.No more vibration. No more noise.
Tom G
2025-08-05 16:03:14
I tried to use this to cover a fairly sharp edge on a piece of outdoor furniture. It seemed to fit well initially but slipped off within a short time. Tried to re-install several times but ended up not using this. Maybe could be used on very thin and extremely smooth material, but didn't work for me.
Murphy
2025-07-23 10:21:56
This is very good molding. I used it around 1/4 inch plexiglass shelving.
Customer
2025-07-10 13:16:14
Poor not sticking to surface very flimsy not a good quality I will return it, but I already use some of it too bad
Lee Allen
2025-06-21 15:54:24
This silicone U-channel edge guard meets my needs for a mirror light surround for a 36'x48" wall mirror. Pliable enough to install on a 1.5-inch diameter curve without any cutting. I have another mirror light for a different bathroom mirror 36"x36" that will not have curves in the inside corners that I will have to miter-cut the product. The judicious application of CA glue comes in handy if it becomes necessary.
Gia
2025-05-03 18:16:07
A bit too flimsy to stay in place, might need glue/tape which is not provided with the item.
Pedra
2025-04-25 16:53:22
Re-enforcing plastic window well cover. Works very well.
Stephanie S.
2025-04-06 14:10:38
I used this edging for a piece of hardware cloth to cover my engine when the car is parked, because a squirrel had been getting in and eating cones on top of the engine. Didn't want wire mesh to snag anything nor cut my hands taking it out, so I got this edging and chose silicone as the most heat tolerant material.I was able to attach strips of this U trim to all sides of the rectangular piece without any need for adhesive, just using a snip of wire at the corner ends bent back to pinch into place. It fits snugly and so far doesn't need any other attachment. The material is quite strong and thick but malleable enough for the sharp edges to also provide some grip. So I am quite satisfied with the product quality and has worked perfectly for this application.
MDR Innovations
2025-01-21 15:23:42
Used it to cover sharp metal edges.
Jean Piché
2024-11-28 12:08:50
Caoutchouc un peu mou pour mon utilisation
Recommended Products