Your cart is empty.
Your cart is empty.
Description:
100% Brand new,never used
Set of 6 quality machine heads for guitars
Complete with vintage push in bushes & screws
Semiclosed machine heads
Heavy duty internal gear
Chrome finish
Position: 3R3L
Package Includes:
6 x Tuning Pegs; 6 x ferrules; 12 x screws
Kian
2025-09-01 14:01:51
These are nice tuners. They feel and look great, especially for the price. They’re a little stiff, with other tuners from this brand, but it works out nice as it holds tuning decently. They’re a perfect fit on my Epiphone Les Paul, with the exact dimensions, key size, and even the screws that came with hold up nice. I didn’t put strings on yet, but overall, these are good quality.
Customer
2025-08-16 11:55:00
My sister bought me a cheap classical guitar on the street in Spain in1978. Flew back with it. When I tried to restring the last time the tuner rollers (white plastic) basically cracked and fell apart. So this item-showed up the day after I ordered it. Looks fine.The big tuner holes lined up perfectly (I measured ahead of time and guitar seemed to match the diagram).Of the 8 screw holes, 4 matched up perfectly, 4 were a little off. I was able to catch the offline ones and drive the screws fine.These ain’t fine quality machine screws-I would suggest lightly oiling the gears, and waxing (I used bar soap) just the ends of the rollers so they turn more smoothly where they contact the wood. I did this and it seemed to work ok. Tuned up and playable again!So- a very cheap instrument with a lot of sentimental value. Well worth the $12.00 to get it up and running. Recommend. Make sure to take some measurements and check the diagrams for the tuners you order
Larry W Sparks
2025-07-10 10:43:57
Good quality, unfortunately they didn’t work for my Applause, but I’m having a really hard time finding the right ones for my guitar! Thankx for your nice product. ✌ï¸
Mr. Badluckdartboardbuyer
2025-06-29 19:17:26
These seem very good for the money and are a big improvement over the original tuners on my Yamaha FG JR-2. The main reason I'm writing this is to caution anyone looking to replace the tuners on their Yamaha FG JR-2 (a common mod on these guitars because the stock tuners are pretty bad). The original hole is quite a bit smaller than 10mm (enough so you will have to drill). Another reviewer said that he dropped these tuners into his JR-1 without any mods, but I can't see how that is possible. I used a 10mm drill bit.
sstanger256
2025-06-26 10:12:49
very good price. Easy to install. Accurate tuning, no excess play. only thing I do not like it the handles seem to be larger than ones I replaced. They seem too close to each other, so have to be careful tuning.
Daveydoh
2025-06-13 13:02:04
These were a lot smaller than I expected and weren’t the same size of the ones on my guitar. It’s also very stiff to turn, I feel it’s going to snap at any moment. I don’t care though it’s just on my beater.
Jeremy K.
2025-05-02 13:37:03
Installed these on a Yamaha FG-Junior acoustic. The fit was perfect without any modifications needed. They are an improvement on the stock tuners. They turn smooth and stay in tune well. One small criticism is that the included screws appeared to be made of slightly soft type of metal. Not an issue for me as I decided to reuse the screws I had from the stock tuners. Although there are higher quality tuners out there, I am giving these a 5 based on the overall quality for the price.
cheyenne byrd
2025-04-20 12:51:39
They went on the guitar with no problem and look nice and they have slacked off just a little bit but thats usually normal with new strings or slight bumps against things
Angel Gabriel
2025-04-07 15:59:04
De buen material y el mecanismo funciona bien, la fuerza que necesitan para girar es muy consistente
Ghengi Asswhaami
2025-03-18 10:30:57
They were fine, exactly as described.
bubby-joe
2025-02-23 14:06:05
look good hope they do the job for years
Eric Perez
2024-12-25 11:03:01
Es un buen producto por el precio que maneja, aunque dependiendo del uso que se le de sera su tiempo de vida.
Chris McMahon
2024-12-23 15:35:02
Replaced my old pegs with this set. They fit perfectly, although two screw holes did not align with the old ones. Not a problem, as the small self-tapping screws inserted easily. Smooth action. Pretty happy with the result.
Recommended Products
$12.99
$ 6 .99 $6.99