Your cart is empty.
Your cart is empty. Description:
100% Brand new, never used
Pickguard and three Mini Humbucker
Switch is a 5 way switch and the wiring is one volume and two tone controls
Magnet: Ceramic.
D.C. Resistance:
Neck and Middle and Bridge 9K
11 screw holes
As with any pickguard, some modification may be necessary for exact hole alignment, as there are many different hole patterns.
Material: PVC Pickguard and Copper Coil Pickup
Pickguard Colour: 3 ply PVC, white or Black
Package Include:
1 x Guitar Loaded Pickguard
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Due to manual measurement, there may be 1-2mm error in size.
J. Hdz
2025-08-07 16:28:24
For someone who has been doing Frankenstein Strat telly and various bolts on builds and knowing what fits and knowing what you have to retrofit and going through all troubleshooting victories, you name it. You know applied science, not influencing cutting out what you messed up. You need the snags to show real life.I have a course called The Tone Consultant, related to HomeWrecker Pickups.I’m not the influencer with the fancy videos, I teach you and my classes real life situations because we build these and we are players as well and take them on the road and put them to the test.This guard fit one of those projects I needed rails which sounded legit, especially tapped. I swapped the humbucker, checked the phase, linked it up. The guitar had a mahogany body and a custom neck from Alloy Guitars. All fit. Lined up as if it were cut to the scale and spec of the guitar. As I dropped the bridge/trem in.I would source them if they made harnesses! Excellent and durable wiring. Easy install, ground bridge to pots or Eric Johnson style, straight to the jack. As with the out from volume and ground of pots/switchesSwitches tapping all pickups especially since the bridge I added a highly charged magnet and custom alloy screws. All worked fantastically. Balance. It saved me a lot of time. So best value for the money if looking for a prewired PG. stock pickups were surprisingly good! I modified bridge mag, custom alloy screws on coil, and keeper bar. Set it on fire! The rails sounded better than i imagined.And I worked for ESP/LTD for 6 years in a custom position that they created for me. Working next to the VP in production management, product development, and special projects for the custom shop. Then I directed multiple departments such as warranty repair and was one of the few to handle the top artists builds and modifications.. The person I did this for was blown away. A combination with this guard and.Thanks to Alloy guitars for the titanium reinforced neck and 1 piece body. This project really exceeded all I thought it would come out. I knew it would be good. But this was next level. And the guard/rail pickups harness were time saving and useable. Thank you so much! I’d love to get in contact and see if there is a broader menu for pre wired harnesses. The workmanship was very clean and strong!
Michael Smull
2025-08-06 16:19:24
I found a $40 Squire Strat for sale on Marketplace. The pickups weren't working, it needed a lot of work. I decided to give this very inexpensive loaded pick guard a try and so far I am very pleased. The sound is very good and all 11 screws lined up perfectly. Yes, it has inexpensive pickups and parts, but to rehab a very inexpensive guitar, you really can't beat it. I haven't tried this guitar yet with my band, but I've been playing all 5 positions in my practice amp for the last two days and I am very pleased with it. I took off one star for the overall cheap feel of it, but again, it is just so inexpensive I'm not sure that is justified.
Ark Music and Tech
2025-05-12 20:01:49
Purchased this to throw in a spare Strat, and it sounds great! I wasn't expecting much at the price, but the pickups are very solid. Not microphonic at all, and good clarity. Neck is smooth and can be creamy, bridge has nice bite. Middle is a little lacking, not just because of Strat middle position.The electronic options are cool to have at this price point. Dime-size pots and cheap wire is to be expected, not sure on the quality of the coil split switches/mute switch but they feel solid.Coil splits work, but as expected the 60-cycle hum is quite high. I'm not too big a fan for the neck/mid splits, too thin, not at all like a true single coil which is to be expected. The coil split for the bridge sounds decent and I'll likely use when playing more light-mid gain that needs some extra bite.One thing to note, the mute switch will require some *slight* alteration to the body route/cavity on your guitar itself. It's just a tad too wide, so you'll need to dremel or chisel out just a tad of wood - I just took a chisel and removed the "corner" of the body route, and that allowed enough room to fit. Only 1 pickguard screw was off, rest were typical Fender 11-hole mounting.The mute switch is not a momentary kill switch, so unfortunately no Buckethead-style playing, but it's nice to have a total mute since the knobs are just a tad blocked by the switches now
Che Wannsit
2025-05-02 18:25:58
Slightly underpowered, but that works for my practice rig. The dual humbucker on the bridge was not wired properly for splitting. Easily fixed. For the price and the style alone, 4/5 stars!
Joe Bouler
2025-03-24 09:07:45
Perfect fit, easy to install and sounds great.
Doc Monty
2025-02-22 18:57:27
I ordered two of these loaded pick guards, and they both turned out to be poor quality and unusable in their current condition.I tested these loaded pickguards prior to installation. I found the electronics to be wired incorrectly to the mini toggle switches and the five way selector switchs. The mini toggle switches worked intermittently so I had to replace those with much better quality ones. I also found open ground soldeting issues. The kill switch is really questionable (open ground hum/buzz). First thing to note, if you are installing this on Squier Stratocasters as I am, you will have to use a Dremel or a chisel to remove a portion of the cavity in order for the kill switch to fit. The three pickups tested ok on one pickguard, while the other pickguard had a shorted hot rail middle pickup. The wire used is subpar at 26 or 28 gauge. I recommend changing this wire to a minimum of 22 gauge stranded. If you are not familiar with guitar electronic wiring (FYI, no wiring diagram or instructions are included) and proficient use of a soldering iron, then you should stay away from these item.
David W Gibbs
2024-12-20 16:06:31
Did not work wiring was all wrong 😔 nothing but buzzing and humming
Erick Dragon
2024-12-14 13:01:27
Llego rápido, en buen estado y ya colocada suena genial, mucho mejor de lo que esperaba Definitivamente le dio una mejora muy grande a mi guitarraâï¸âï¸âï¸âï¸âï¸
Stephanie Hewitt
2024-12-06 11:17:53
Not much more to say as I can’t use the product
Recommended Products
