Your cart is empty.
Your cart is empty. The Schumacher BAF-C50 50-Amp Replacement Battery Clamps are exactly what you need to ensure your automotive battery is up and running. The clamps are easy to use, with clear instructions included on the packaging. They’re also color-coded red and black to provide clear polarity insight, preventing risk of damage from reverse polarity.
If you need a reliable and well-made replacement part or accessory for your Schumacher product or your vehicle battery, you should look no further than Schumacher Electric’s line of battery accessories and replacement parts. Since 1947, Schumacher has been manufacturing high-quality and innovative power conversion tools and automotive accessories. For your peace of mind, each Schumacher product is backed by Schumacher’s minimum one-year warranty period and supported by U.S.-based customer service agents.
En español (ES): Si necesita un repuesto o accesorio confiable y bien fabricado para su producto Schumacher o la batería de su vehículo, no debe buscar más allá de la línea de accesorios y repuestos para baterías de Schumacher Electric. Desde 1947, Schumacher fabrica herramientas de conversión de potencia y accesorios de automóviles innovadores y de alta calidad. Para su tranquilidad, cada producto Schumacher está respaldado por una garantía mínima de un año con Schumacher y cuenta con el respaldo de agentes del servicio de atención al cliente en Estados Unidos.
Jaxmom
2025-08-31 14:04:24
These clamps are at least as good as the original clamps, which last 10 years. I soldered the wires and the whole project took about 20 minutes. I am happy with these $4 clamps.
L. R. Krause
2025-08-08 20:36:25
Needed for replacement on battery charger. Worked well no issues.
partspharm
2025-07-27 13:10:08
These clamps were more heavy duty than the original original 50 amp clamps that came with my old charger. However the instructions that came with them were not for the clamps I Ordered. Not a big deal. Good value
engineer
2025-07-25 11:19:32
I used a soldering gun to solder the cables to the clamps. As you can see, my cables aren’t sized for 50-amps (my power supply puts out only about 6 amps) so the crimp holding the insulation is a little too large. But it still holds just fine - in my application there’s not a lot of force on the cables.
RickB
2025-06-06 13:26:01
Worked perfect to refresh the clips on my battery charger
ernslinger
2025-04-27 18:00:41
Awesome... they do just what they're supposed to do... go figure... ha
Tony G.
2025-03-31 12:24:07
I have used some of these to make high current jumper wires for testing automotive/RV systems. However I have a different use for these. When making voltage measurements around batteries, inverters and chargers using thick cables I am not always able to connect my small voltmeter alligator clips to the large connectors. I keep two of these handy to connect to the large power connectors and then connect the small alligator clips to the back of these clips. The voltmeter connections stay in place and my hands are free to flip switches or tighten/loosen things while troubleshooting.
Phil 1956
2025-03-14 11:16:00
I mistakenly bought these clamps because they look exactly like the ones on my Schumacher speed charger. One of the originals had fallen off and was lost. These are good clamps but the are not built to facilitate attachment to a coopper wire as needed for the charger.
Kevin F.
2025-02-22 13:48:20
Genuine part can't complain
DR
2025-01-29 18:22:23
The factory clips broke off the booster after 2 years. These were very easy to attach and work great
Acreage Big Bull
2025-01-19 13:27:39
I purchased these to replace those that were on a bargain battery minder that I purchased last year. The original clips on it were awful. They came apart in no time. These look better and so far so good.
Louise Tessier
2025-01-06 12:13:46
OK
Dino
2024-12-24 14:42:58
Well made and good locking tabs to attach wires. Suggest you run wire up one leg of clamp and down to the bottom of the other clamp and crimp twice. Once to hold cable and the other to make connection to exposed copper wire. Strip enough wire back to double if not triple fold and twist before crimping wire for a solid electrical connection.
Recommended Products
