Your cart is empty.
Your cart is empty.ScotchBlue Original Multi-Surface Painter's Tape offers a versatile solution for protecting your surfaces so you can bring your creative visions to life. Designed for smooth or lightly textured walls, trim, baseboards, tile and glass, this adhesive tape can stay on for up to 14 days and removes easily without leaving behind a sticky residue. Resistant to UV rays, sunlight and moisture, ScotchBlue Painters Tape is an ideal indoor and outdoor tape, letting you conquer wow-worthy painting projects on multiple surfaces. Made from 45% renewable resources with a core made from 70% post-consumer waste, this solvent-free tape is made in a zero-landfill site certified for energy management to provide you with a sustainable painting product. To use, apply the painting tape firmly onto the surface and let sit for 30 to 60 minutes before painting. Wait until the paint is dry before removal. The best paint jobs start with Scotch Painters Tape. With a full range of adhesive solutions, ScotchBlue Painter’s Tape delivers confidence in superior results to get the job done right and effectively the first time.
K cup gal
2025-08-28 15:32:17
Sticks to surface and does not damage the wall when you remove. Good Stuff !
Lorin
2025-08-14 14:39:31
I used this tape whenever I put peel and stick tile down and it worked great! I had used 1 inch tape in another bathroom, but using this tape made the process so much faster. Would definitely get if you plan on doing a project like that
April Press
2025-08-06 15:44:23
Went on easy, half plastic sheeting up well and came off easy with no residue. Very good tape. Arrived quickly.
Steven Peck
2025-07-25 12:28:57
It's blue and it's sticky. It's paper tape that's very easy to tear.
Javid Akhundov
2025-07-19 16:30:03
The product arrived without any physical damage or cosmetic imperfection.The usage of this tape was mostly for modifying the sound signature of a mechanical keyboard. Overall, it is good, does the job and does not leave any adhesive on keyboard's PCB.After a while, I used in to sort of stitch the teared parts of a pleather office chair. To my surprise, not only does it hold the pleather together, but it also does not get peeled off so easily. For three months straight, it still stays on the chair and looks, as if it was applied yesterday. The only things, which started to peel off, are tiny sharp corners, but the tape does not continue to peel off from them.Before I purchased this tape, I used other types of cheap masking tapes for all sorts of work. They always failed me in holding stuff, staying in place for a long period, and they always left adhesive one way or another.I will probably start looking into other products from 3M Company from now on.
L.G
2025-07-06 13:12:02
But it leaves sticky glue on wood..hard to remove. But from other material it's very good and I like the wide size
DTM
2025-06-03 17:54:33
Your time and workmanship is worth the extra price.
Black Poodle
2025-05-17 18:04:52
Good quality. Used for painting project.
Ale DG
2025-04-30 12:22:44
Pensé que requeriria mas producto y compre 2, ahora veo que cada cama de cinta dura hasta 10 impresiones antes de desgastarse, se utilizan 3 tiras de 22 cm para cubrir una cama de 22 x 22, cada cinta dura 80 camas aprox.
Carlos
2025-04-29 21:13:58
Llegó en tiempo y forma, todo correctamente.
Maurice
2025-04-17 16:11:49
This is the right tape if you use tape on your 3D printer hot bed. It's nice and wide, so you don't have to lay down as many strips. Prints adhere better to this than to no-name blue masking tape...no idea why. A roll lasts a long time, so the cost per print is quite low, compared to a single-sheet product With a single sheet, if you gouge it, you need to replace the whole thing. If I gouge this masking tape, especially when it's still fairly new, I just change out the damaged strip. Also, I rarely change out the strips at the edge of my table (330 x 330 mm), as I rarely print things that large. So, again, the tape is better value for a second reason. It's hard to find locally, especially in this width, as all our local hardware stores seem to have gone out of Scotch products for some other brand I never heard of. Glad to be able to get this on Amazon!
RealRiggs
2025-04-11 15:54:24
I like this wider tape for the bed of my 3d printer. Easier to cover bed with less seem line ups to worry about.You need to know your prices, as this item seems to fluctuate between low tens and low twenties.
Cody n' Lauren
2025-01-22 14:10:46
Notice how all my builds have painters tape? That's because BLUE painters tape is pourse. Filament sticks to it like crazy! It's all I use. I mean I have a mega pro, the filament sticks just fine to the bed but to the tape. BETTER! Slight rub with a green scratch pad. Omg, the finest detail sticks. Trust me. It's all I use now. Buy the wide stuff. 2.8 inches or whatever. Make sure it's this brand, don't go cheap.
Recommended Products
