Your cart is empty.
Your cart is empty. Scotty #140 Transducer Arm Mount has been designed for kayak anglers needing an easy way to install transducers for transport. This Kayak/SUP Transducer Mounting Arm is made of high strength composite material that will offer you years of service without any corrosion problems. Also included is the Slip Discs that offer micro adjustments when needed. The Scotty Transducer Arm Mount telescopes from a compact 11.5 in. to 18 in. when fully extended and swivels 360 degrees.
Scotty manufactures products that are sold into the fishing, marine, and outdoor industries worldwide. We have all the gear from Pot Pullers, manual and electric Downriggers, Rod Holders, Oar Locks, Fishfinder, Rod, and Float Tube Mounts, to Safety Equipment for your boat, kayak, and stand up paddle board. When it comes to on the water safety, Scotty has got you covered! Scotty safety equipment ranges from Rescue Throw Bags, Whistles, Flashlights, and Sea-Lights.
We have total commitment to quality, and unmatched service. That means our customers everywhere can expect reliability and satisfaction from every product that carries the Scotty name. With Scotty you will find the right Downrigger, Mounting System and Accessories to suit your fishing, boating, kayaking and stand up paddle board needs.
Steve A
2025-09-04 15:46:20
I used this, paired with a Scotty inflatable accessory attachment, and it works well for my inflatable Intex Mariner 4. It allows me to quickly attach my Garmin Striker 4 portable to the boat and remove it when I'm done. I also like how the arm allows you to raise and lower the probe depending on if you're using it or not. Surprising it was very solid in the water and even on my inflatable had very little movement, even going 5mph in the water.
Rob
2025-09-01 10:07:49
I've used this mount a couple times and so far it's working out well with my setup. The mount is all plastic and seemed a little flimsy in the fully extended position. Fortunately I am able to collapse it, which makes it sturdier. I do wish the final piece that connects to the transducer was a bit thicker / sturdier as it seems like it will be the weak point in this setup. I did 3D print an extension to get the mount to swing over the side of my inflatable kayak properly. I don't think this would be an issue on a hard shell kayak. Overall I am happy with my purchase, especially since I got it on sale.
JJ
2025-08-31 15:45:30
Pretty good. I messed up attaching the transducer due to bad instructions.
Robert Griffith
2025-08-19 18:03:29
It’s a little awkward to use in my bass raider, but that has nothing to do with the quality. I’m a big fan of this.
Austin
2025-08-16 12:07:14
Overall this mount is awesome. The installation instruction weren't even needed. Find a good spot out of your way and mount.. simple. Very solid mount. The adjustability is as simple as turning a few wing nuts. I would like to see black small lines on the rubber washers that adjust the angle of the arm. For now I use a sharpie to make sure I'm level when I set my transducer.
Laura Southworth
2025-08-11 17:13:46
I got this for my jon boat. I mounted it on the front of the boat and was concerned with it being to flimsy with me running around the lake but it does really good with 2 electric trolling motors that equal about 60 pounds of thrust wide open. Dont know how it would do with a gas motor but I like how you can easily flip it up out of the water when I am river fishing and get up around some sticks and logs in the water. The only thing I wish that it had which I though I was going to need but didnt was an extension. I would have rather paid a few extra dollars to have had it included in the kit. Other than that great buy and cheaper here than the big box fishing mega store.
dan t
2025-08-03 15:41:05
I put this on my cheap sun dolphin it works like advertised
Daniel Lee Thompson
2025-07-28 14:23:30
I gave this item three star only because it was to short for my application, probably work great on a smaller boat .
Jason Bonney
2025-06-30 14:31:32
Legitimate scotty product! I like This because I didn't have to drill holes below the water line or put epoxy all over. This is a great rig, I was able to set it up with a humminbird pirhana197c on my pelican maxim100 angler kayak. The humminbird transducer required a little modification to make it work but in the end fits great. It can be adjusted in almost any way. You can easily flip it up out of the water or harms way. No complaints, it's a very well built and sturdy product. You won't be disappointed!
Cesar ivan reynoso gutierrez
2025-06-26 11:08:51
Excelente
maik weihrauch maik weihrauch
2025-06-13 17:01:19
Eine einfache aber geniale Erfindung, einfach empfehlenswert
MAURO
2025-05-25 15:15:37
tutto perfetto
GoPro MAXサラリーマン
2025-05-07 11:31:16
安定性ãŒã‚ã‚‹
Steve A
2025-04-21 13:41:33
I used this, paired with a Scotty inflatable accessory attachment, and it works well for my inflatable Intex Mariner 4. It allows me to quickly attach my Garmin Striker 4 portable to the boat and remove it when I'm done. I also like how the arm allows you to raise and lower the probe depending on if you're using it or not. Surprising it was very solid in the water and even on my inflatable had very little movement, even going 5mph in the water.
Rob
2025-04-09 14:28:57
I've used this mount a couple times and so far it's working out well with my setup. The mount is all plastic and seemed a little flimsy in the fully extended position. Fortunately I am able to collapse it, which makes it sturdier. I do wish the final piece that connects to the transducer was a bit thicker / sturdier as it seems like it will be the weak point in this setup. I did 3D print an extension to get the mount to swing over the side of my inflatable kayak properly. I don't think this would be an issue on a hard shell kayak. Overall I am happy with my purchase, especially since I got it on sale.
JJ
2025-03-23 12:36:38
Pretty good. I messed up attaching the transducer due to bad instructions.
Robert Griffith
2025-03-21 14:01:44
It’s a little awkward to use in my bass raider, but that has nothing to do with the quality. I’m a big fan of this.
Austin
2025-03-12 12:13:12
Overall this mount is awesome. The installation instruction weren't even needed. Find a good spot out of your way and mount.. simple. Very solid mount. The adjustability is as simple as turning a few wing nuts. I would like to see black small lines on the rubber washers that adjust the angle of the arm. For now I use a sharpie to make sure I'm level when I set my transducer.
Laura Southworth
2025-03-01 13:34:23
I got this for my jon boat. I mounted it on the front of the boat and was concerned with it being to flimsy with me running around the lake but it does really good with 2 electric trolling motors that equal about 60 pounds of thrust wide open. Dont know how it would do with a gas motor but I like how you can easily flip it up out of the water when I am river fishing and get up around some sticks and logs in the water. The only thing I wish that it had which I though I was going to need but didnt was an extension. I would have rather paid a few extra dollars to have had it included in the kit. Other than that great buy and cheaper here than the big box fishing mega store.
dan t
2025-02-21 11:34:57
I put this on my cheap sun dolphin it works like advertised
Daniel Lee Thompson
2025-02-19 17:38:21
I gave this item three star only because it was to short for my application, probably work great on a smaller boat .
Jason Bonney
2025-02-15 11:14:44
Legitimate scotty product! I like This because I didn't have to drill holes below the water line or put epoxy all over. This is a great rig, I was able to set it up with a humminbird pirhana197c on my pelican maxim100 angler kayak. The humminbird transducer required a little modification to make it work but in the end fits great. It can be adjusted in almost any way. You can easily flip it up out of the water or harms way. No complaints, it's a very well built and sturdy product. You won't be disappointed!
Cesar ivan reynoso gutierrez
2025-02-03 17:45:17
Excelente
maik weihrauch maik weihrauch
2025-01-20 17:08:56
Eine einfache aber geniale Erfindung, einfach empfehlenswert
MAURO
2024-12-17 10:08:41
tutto perfetto
GoPro MAXサラリーマン
2024-12-01 13:02:32
安定性ãŒã‚ã‚‹
Recommended Products
