Your cart is empty.
Your cart is empty.
SE is proud to present our 9 in 1 Texturing Hammer with Interchangeable Tips. Our texturing hammer is a great way to introduce a variety of textures into your metal designs. Use the small designs to focus texture in certain areas and the larger designs to cover a bigger area. You can also layer textures by using multiple tips to create a unique design.
Features of our 9 in 1 Texturing Hammer with Interchangeable Tips include:
(1) 9 Different Interchangeable Tips Include:
Stripe Rounded Stripe (Rain)
Square (Checker Board)
Cross (Diamond)
Dome (Moon Face)
Dimple Singe Cone Single Round Single Square
(2) Tip diameter: 3/4-Inch
(3) Total hammer weight: 8oz
(4) Overall length: 10-1/2-Inch
(5) Each tip is attached with a threaded collar
Important:
Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging.
SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness this 9 in 1 Texturing Hammer with Interchangeable Tips has to offer.
SE is a registered trademark protected by US Trademark Law.
Jerry Customer
2025-08-31 21:45:13
This hammer is a nice size and weight for me...As other reviewers state ,I also found the collars come loose on their threads with only a few taps..I found a quick and easy cure for this is to wrap some Teflon thread tape around the threads before you attach your head..This stopped the threaded ring from coming loose..You will need to experiment with how much {how many turns} of tape to use..To many and you cant start the collar, to few and it does not keep the head from loosening...You may need to add more tape after you change out the head a few times as the tape will ware off after a while..Over All its a good hammer and good price...
Angelique
2025-08-25 19:00:42
This is one of the coolest tools for making jewelry I have ever seen. I love everything about it. I keep on smooth hammer on the one side and so on the other side, I change the different textures.It works GREAT. I love it.I can recommend this to anyone in the jewelry-making business. You will be happy to own this gem.
James
2025-08-04 20:48:29
Not bad and not great.Works as it should.Good price for the product.
Michelle Christensen
2025-07-31 14:55:35
I love all the options and its easy to change out! They do come loose while hammering so I'll probably have to use a little tape. Very light weight and not made for heavy duty hammering.
D. Mutchler
2025-07-24 13:17:00
As others have said, I believe, the cups that screw on to hold the various heads/tips do not tighten down well; they loosen pretty easily. I have not had one come off, I admit, but I use extreme force to tighten and after not much hammering, I can tell the one being used (usually) is loosening. That is a potential hazard. As well, right out of the box, the entire head needed to be tightened; it too was loose on the wooden body, but that’s an easy fix.All in all, it is a very inexpensive alternative to, e.g., a Fretz interchangable head hammer and set of faces (about $350-400 bucks). It works, so there you are.Myself, if I find I use this quite a bit, I’ll probably take the leap and buy the Fretz.
Sheehan
2025-06-25 18:39:39
The product is what I wanted.
P. McIntosh
2025-06-07 15:51:19
One session of texturing a few square inches of copper against a steel bench block flattened the patterns on two of the faces (the one with squares and the one with the thick lines). The steel is of poor quality and can't hold up to the job. The faces will also not hold position because the retaining ring comes loose after a few blows, even if tightened with pliers. I don't know if this is an inherent flaw in the concept of interchangeable faces or just this particular implementation, but you might want to consider fixed-face hammers instead, and you definitely want a better quality steel than this offers.
Tommy J McFerin
2025-06-05 20:21:37
I love this hammer with design ends! I’ve used it to make several jewelry pieces already! What a great idea!
Tracy
2025-05-19 17:35:48
Has been used and has worked well
Wonderbeecats
2025-05-12 11:57:09
Makes 9 different textures, works well, comes a little loose while using, but just needs to be tightened, it's not a problem. Textures are nice, you can't go wrong at this price, recommended.
Roberto M
2025-04-21 17:04:32
Purtroppo la maggior parte degli innesti non si adattano all alloggiamento e vanno modificati. Non è un buon acquisto anche se la struttura è solida. Peccato bastava fare un controllo di qualità prima di inviare L articolo ai clienti
Julie
2025-02-22 17:12:54
Since I just dabble in texturizing copper wire, this was absolutely perfect for me. I didn't want to spend a lot on several different hammers, so this was the best option for my needs. I totally love it!
Maxim Spralja
2025-02-16 21:22:33
Great for the price. Like the interchangable heads. Screw on point will loosen up with heavy hammering, but nothing someone handy cant overcome
Recommended Products
