Your cart is empty.
Your cart is empty.Product Description
- Specification:
- Net Weight:1.9 pounds
- Folding Height: 35 cm (13.7 inch)
- Opening Height: 55 cm (21.6 inch)
- Package included:
- 1 x Ceiling Rod (Ceiling Stand); 1 x Adapter Screw (Convert Screw); 4 x M8*60 Expansion screws
- MK studio Highly Recommendation:
- 1. The stud can be used vertical or horizontal.
- 2. This Light stand adapter is great for wall and ceiling mount.
- 3. It comes with 3/8, 1/4 adapter screw to apply to different flash.
- 4. Made of high-quality metal material, the length can be adjusted.
- Notes: Does not offer the rotation and tilt.
Adam
2025-09-07 17:27:42
These are very well built. The included hardware is foreign and useless. Use your own screws. Holds a good amount of weight. I am not going to test its limits, but it holds a medium sized soft box with a large CFL with ease. Plus a significant amount of weight from me applying pressure to make sure it's tight. It wouldn't budge. Make sure you are in a stud with 2 holes, and use anchors for the other 2 and you won't have a problem.The extension arm works, there really isn't a lot of difference from open to closed, but depending on your use they might be more useful to you. The fact that it's there was a plus because I had the idea of adding my own sections from my current stands so I could have them farther from the ceiling, but my old parts would not fit properly.Make sure youKnow where you want these before you install them, or even buy them. You are limited to a stud (if you don't make your own mount) and once it's installed you don't have a lot of options for movement other than one dimension of rotation and about 10 inches of extension.I ended up mounting these to my wall onstead of the ceiling since my ceiling is very high and the lighting angle wasn't going to work for me.These are perfect of you have a similar setup over and over and don't want to put away and setup lighting stands every time or have stands cluttering your floorspace.I would buy more of these if I needed them again.
Marcellus King
2025-09-03 16:24:48
I bought this in order to hold an overhead camera from the ceiling rather than having to use my C-stand in an awkward and somewhat dangerous position and this thing came through perfectly. It's sturdy, and with the right screws and mounting, it's very sturdy.The package comes with screw hardware for mounting into concrete, but that was not my situation so I just used my own. I currently have two of the holes mounted directly onto a stud, and the other two secured with a screw into a drywall anchor. It holds up tight and I don't have to worry about it. I also plan on using it for my somewhat heavy softbox.I might get another one for suspending the main camera from the ceiling as well, but I would have to get a longer one so that the camera would be able to rest at face height. But I have some other hardware ideas for this additional setup. But overall, I'm very happy with this purchase.
E Z
2025-08-25 16:51:27
I was a bit skeptical at first, but the Selens Photography Wall Mount exceeded all my expectations. Once installed, it became an essential part of my studio setup. It holds my lights and reflectors like a champ, with zero wobble or instability. The build quality is impressive, and it feels like it’s built to last. I love that it helps me keep my workspace clear while securely holding my equipment overhead. If you’re looking for a reliable mounting solution that frees up floor space, this is the way to go!
Melissa Moshette
2025-08-19 10:52:38
My husband loves this product. Easy to install and it dows the job.
spohn
2025-08-14 10:40:51
Overall I am happy with this wall mount. I'm mounting an LED video light panel to my wall. It's well built and sturdy. However, this did not come with traditional screws to mount this to the wall. It came with what appears to be concrete anchors. I'm not sure why they would assume we are mounting this in concrete and not wood/drywall. So I had to improvise with screws I had on-hand.
Customer
2025-08-11 21:51:24
We got tired to tripping around the light/camera tripods...saw these and found the solution! Easy to mount (mine are on the ceiling); easy to adjust. Wires for the lights go in command clips along the wall.
Kevin A.
2025-07-26 15:46:24
1/4" thread on the adapter enables this to be used to mount a studio microphone from a beam above. This helps space issues in a tight closet acoustic recording booth.
Mrs. Olivia Ballard
2025-07-16 13:20:53
Great investment
Jean-Guy Hinse
2025-07-05 20:25:49
Solide et polyvalent. Bon rapport qualité prix
Ricachá
2025-06-26 16:24:24
Producto y servicio como puede esperarse. Quizá sólo un poco tardada la entrega. Pero el producto está bien y no de calidad chafa.
Adam
2025-06-21 14:18:07
These are very well built. The included hardware is foreign and useless. Use your own screws. Holds a good amount of weight. I am not going to test its limits, but it holds a medium sized soft box with a large CFL with ease. Plus a significant amount of weight from me applying pressure to make sure it's tight. It wouldn't budge. Make sure you are in a stud with 2 holes, and use anchors for the other 2 and you won't have a problem.The extension arm works, there really isn't a lot of difference from open to closed, but depending on your use they might be more useful to you. The fact that it's there was a plus because I had the idea of adding my own sections from my current stands so I could have them farther from the ceiling, but my old parts would not fit properly.Make sure youKnow where you want these before you install them, or even buy them. You are limited to a stud (if you don't make your own mount) and once it's installed you don't have a lot of options for movement other than one dimension of rotation and about 10 inches of extension.I ended up mounting these to my wall onstead of the ceiling since my ceiling is very high and the lighting angle wasn't going to work for me.These are perfect of you have a similar setup over and over and don't want to put away and setup lighting stands every time or have stands cluttering your floorspace.I would buy more of these if I needed them again.
Marcellus King
2025-06-12 12:13:16
I bought this in order to hold an overhead camera from the ceiling rather than having to use my C-stand in an awkward and somewhat dangerous position and this thing came through perfectly. It's sturdy, and with the right screws and mounting, it's very sturdy.The package comes with screw hardware for mounting into concrete, but that was not my situation so I just used my own. I currently have two of the holes mounted directly onto a stud, and the other two secured with a screw into a drywall anchor. It holds up tight and I don't have to worry about it. I also plan on using it for my somewhat heavy softbox.I might get another one for suspending the main camera from the ceiling as well, but I would have to get a longer one so that the camera would be able to rest at face height. But I have some other hardware ideas for this additional setup. But overall, I'm very happy with this purchase.
E Z
2025-05-31 13:54:13
I was a bit skeptical at first, but the Selens Photography Wall Mount exceeded all my expectations. Once installed, it became an essential part of my studio setup. It holds my lights and reflectors like a champ, with zero wobble or instability. The build quality is impressive, and it feels like it’s built to last. I love that it helps me keep my workspace clear while securely holding my equipment overhead. If you’re looking for a reliable mounting solution that frees up floor space, this is the way to go!
Melissa Moshette
2025-05-29 18:39:53
My husband loves this product. Easy to install and it dows the job.
spohn
2025-05-28 12:26:07
Overall I am happy with this wall mount. I'm mounting an LED video light panel to my wall. It's well built and sturdy. However, this did not come with traditional screws to mount this to the wall. It came with what appears to be concrete anchors. I'm not sure why they would assume we are mounting this in concrete and not wood/drywall. So I had to improvise with screws I had on-hand.
Customer
2025-05-26 15:50:20
We got tired to tripping around the light/camera tripods...saw these and found the solution! Easy to mount (mine are on the ceiling); easy to adjust. Wires for the lights go in command clips along the wall.
Kevin A.
2025-05-22 14:24:55
1/4" thread on the adapter enables this to be used to mount a studio microphone from a beam above. This helps space issues in a tight closet acoustic recording booth.
Mrs. Olivia Ballard
2025-05-16 15:04:38
Great investment
Jean-Guy Hinse
2025-05-12 21:03:11
Solide et polyvalent. Bon rapport qualité prix
Ricachá
2025-04-28 18:37:55
Producto y servicio como puede esperarse. Quizá sólo un poco tardada la entrega. Pero el producto está bien y no de calidad chafa.
Vince Lombardi
2025-04-14 11:20:18
Bought this camera mount, but not to use it as intended. I had been looking for a simple desk mount pole for my desk with nothing that would suit my needs or in the price range I wanted. Then i found this Meking ceiling mount and I new it would work. Instead of ceiling or wall mounting it, I sat the flange end on the desk and used a clamp to hold it down. Now I can mount my DSLR to it behind my monitor and it is just perfect. Given it's great build quality I am certain that it would have worked fabulously as a ceiling mount, but in my case, it ended up working great as a desk mount. I would not hesitate, and have been considering buying another.
Michael
2025-04-09 18:24:18
The media could not be loaded.
Oliver W.
2025-03-08 15:51:22
Added this to my adjustable table for streaming and mic setup. Sturdy build.
Vince Lombardi
2025-02-25 16:19:16
Bought this camera mount, but not to use it as intended. I had been looking for a simple desk mount pole for my desk with nothing that would suit my needs or in the price range I wanted. Then i found this Meking ceiling mount and I new it would work. Instead of ceiling or wall mounting it, I sat the flange end on the desk and used a clamp to hold it down. Now I can mount my DSLR to it behind my monitor and it is just perfect. Given it's great build quality I am certain that it would have worked fabulously as a ceiling mount, but in my case, it ended up working great as a desk mount. I would not hesitate, and have been considering buying another.
Michael
2025-02-17 09:33:00
The media could not be loaded.
Oliver W.
2025-02-12 10:29:40
Added this to my adjustable table for streaming and mic setup. Sturdy build.
Recommended Products