Your cart is empty.
Your cart is empty.*****FOR THE BEST FIT ONTO BOTTLES: PLEASE wash/use the lids up to 4x for the smoothest twist/fit. Have a brand new bottle? PLEASE was them in the dishwasher at least 2-3x as well for the smoothest fit.***** *PLEASE NOTE* These ONLY fit the flat/rounded base models of one name brand (most popular) shaker bottle brand (sizes 28oz only, may fit other sizes but not guaranteed). Please wash the lids multiple times in the dishwasher before initial use - this will remedy any potential fitting issues. These lids only fit onto shaker bottles from ONE brand. Also, they DO NOT fit the Perfect Shaker Bottle Brand, Hydra cup, Shakeology Brand, Ice Shaker brand, Jax Brand, Blue Peak Brand, nor are they compatible with mason jars. Here at Impeccable Lids, we were extremely frustrated with the poor quality lids that come with most shaker bottles. Unacceptable, right? After months of experiencing leaky lids when making a protein shake, I knew I needed to do something… My mother cemented this idea in my head when she was furious that I got my protein shake all over the walls and floor of our house! And the last thing you want to do is clean up a mess after working your tail off in the gym! We are the only company that offers the perfect/most universal replacement lid for those lids that keep on cracking. These have been specifically designed so they will fit well onto your shakers without any hassle, and most importantly, will not crack on you! We also know that lids can easily be misplaced. Instead of searching your entire house to find a lid, save some time, money (and the environment!) by having an extra replacement handy! This wide mouth, secure replacement lid is excellent for making protein shakes, smoothies, meal replacements, dressings, or pancake batter. The reliability you need for those lids that keep cracking as a result of daily use. BPA/PHTHALATE FREE & DISHWASHER SAFE
Neil
2025-08-11 13:20:20
I didn’t think it was possible to fall in love with a shaker bottle lid, but here I am, waxing poetic about the Impeccable Lids Shaker Bottle Replacement Lid Cap Top. First of all, the name says it all—impeccable! This lid has breathed new life into my old shaker bottles, which were basically on life support thanks to cracked lids and mystery leaks.The seal on this thing? Tighter than my jeans after cheat day. Not a single drop escapes, no matter how vigorously I shake my protein concoction. It’s like a tiny Fort Knox for your beverages! And the flip-top lid snaps shut with the satisfying authority of a mic drop. Boom.Plus, it’s easy to clean—no more hunting for rogue protein powder stuck in nooks and crannies. (Seriously, who designs lids with more hiding spots than a game of hide-and-seek?)If you’re on the fence, just know this lid doesn’t just replace—it upgrades. It’s like going from a clunky old flip phone to the latest smartphone but for your shaker bottle. So go ahead, give your bottles a glow-up. Impeccable Lids: keeping your shakes contained and your day on point! 🥤✨
Timothy Hinson
2025-07-18 17:39:27
so close, but don't fit the spout hole or the screw-on cap.
ThatGuy
2025-07-03 15:38:49
My wife started recycling my blender bottles that have been in the back of the cabinet that are missing lids. The lids would crack or break by I hated to throw out the whole bottle and shaker. I found these replacements and thought I’d give them a try. At first I was not impressed. I tested the lids when they arrived on my bottles with water over the sink. The thread is slightly off so they did not screw on all the way and leaked drips of water. I put them through the dish washer and tried again. After the dish washer the thread seemed to tighten up and the fit better. No leaks. The white tap that covers the mouth hole is stiff so I suggest cycling it a few times before use.I have used the lid 4-5 times now with protein and pre work outs at the gym. No leaks. You can tell it doesn’t screw on 100% so don’t over tighten.Overall they work so far, no perfect fit but good replacement with no leaks. I highly recommend running through dish washer before first use for fitment before writing a review. Will update if I run into any issues.Hope this review helps someone.
Bryan R Craker
2025-05-19 13:33:57
They sort of work but they're pretty bad, they don't quite fit so they leak. Especially bad because these are meant to be used with a bottle that you shake full of liquid.
Dan
2025-05-18 10:21:51
This lids are a great replacement new, we will see how they do long term. However, I would order two packs (maybe even three depending on your luck) because their defect rate seems to be 50%. Check the picture, where the lid meets the mouthpiece, there are little divots that cause it to have a gap in the seal causing leakage. I ordered two packs, six total lids, three of them work perfect, the other three have this defect. Test each lid when you order!
Amanda Anderson
2025-04-03 12:02:16
I love blender bottles and I have 1 for every day of the week. Unfortunately, over the years the lids and caps would split and then I'd have a bottle with no lid and that sucks. One day just for S&G's I decided to search for replacement blender bottle caps, and I came across this product. The price wasn't too steep, so I deemed it worth the try. They arrived in 2 days, and after a dishwasher cycle, they were ready for use.Basically, they work as expected. They fit, they don't leak, and they're seemingly at least as durable as the originals. If you're missing blender bottle caps, these will absolutely suit for replacements, and I encourage you to try them.
kellie green-boes
2025-01-26 16:07:24
Update a few weeks after receiving the lids- they’ve become perfect after using quite a few times. Dishwashing has caused them to have a solid tight fit. Great co and product!I bought these lids and they leaked a little. I did a return. The manufacturer reached out with dishwasher instructions to get a tighter fit & sent me more to try. They believe in their product! I did a couple dishwasher washing’s and tightened them tighter and no leaks! Great product.
Kirby
2025-01-19 17:55:28
I bought these to be able to use them on my existing B-bottles instead of buying all new. I used them as one would, I rarely put them into the dishwasher even though it said you could in the description. All 3 of the lids that came broke this way. I only ever put protein and non effervescent pre-workout in it and this is the result. Honestly I am just bummed I have to buy all new bottles and throw my capless ones away.
Recommended Products
