Your cart is empty.
Your cart is empty.Product Description
Specifications:
- Pad Size: 2" and 3"
- Orbit Diameter: 3mm
- Free Speed: 15,000RPM
- Air Consumption: 4 CFM
- Air Inlet: 1/4"
- Air Pressure: 90 PSI
- Exhaust: Rear End
- Weight: 920g
- Light weight and high base, single hand operation
- The rubber sleeve handle can be used for a long time
- Eccentric double-rotation polishing method to make the polishing effect more uniform and smooth
- Different type of sandpaper can be installed with different type of disc
- The small design makes it perfect for reaching smaller areas and tighter contours with less user fatigue.
- New version, high strength, wear resistant, long service life
Product Feature
Press-to-Switch Design
Designed with comfortable pressing switch which is easy to use with higher efficiency.
Exhaust and Noise Elimination Design
With the exhaust and noise elimination design,it creates a quiter working environment with less noise.
There is a dust net inside, which can effectively prevent foreign bodies from entering the body
Air Speeding Regulator Valve
The working speed and air pressure can be adjusted according to detailed working requirement.
Widely used
Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
How to Replace the Sanding Pad?
STEP 1
Find the lock hole
STEP 2
Insert the fixed pin into the lock hole and keep the pin still
STEP 3
Turn right and screw off the sanding pad
STEP 4
Put on the new sanding pad and screw tight. Replacement complete!
inRoutine maintenance for 2" and 3" random orbital air sander
- Stop your Job when finding any irregular sound or vibration at operation and then check and repair the tool.
- Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air.
- Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended.
- Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance.
- Do release the water out of the air compressor and air hose after an operation.
- Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.
Instruction manual for 2" and 3" random orbital air sander
- Please check off all tightening parts of the tools to be in good condition before operation.
- Working pressure to be 6.3 kg/cm3 (90PSI) at operation.
- Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet
- The best hand stress on the tool is from 5Kg to 7Kg when operation.
- Release the air supply when replacing the sandpaper or the backing pad.
- Wear protection glasses, eye protector, dust mask and gloves at operation.
- Have a short break in every 30minutes to avoid any possible injury due to tiredness.
- Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage.
- Do not touch the rotating part of the tool with your hand or your body at operation.
- Start your sanding job after you fit the sanding pad flat on the surface you are working on. Please refer to Figure 2.
jeff h.
2025-08-28 10:59:14
great product, works great,
CS
2025-07-31 13:03:46
Buffed tight areas perfectly. Very pleased.
Shane and Jess
2025-06-27 20:47:05
The sander works great, great price and arrived on time.
Jim jones
2025-05-29 13:28:35
Did more in 5 minutes with this than I got done in an hour with my electric sander. Highly recommend 👌
Neutronmx
2025-05-26 17:14:49
This works great. It has a very short throw so it's perfect for detail work. The adjustment knob is firm so it stays where you set it. You can't control the speed with the trigger but the knob is easy to access. There is air leaking out of the tool somewhere but it's not enough to cause any issues.
Thomas E
2025-05-20 17:41:00
With several questionable reviews, I wasn't sure what to expect, but this sander is great so far. I purchased for woodworking and I have not encountered many of the issues that others have.- The sanding disks stay on the pad with no issues, but I run mine at 60psi and also turn the air flow down for slower rotation.- Many have reported trouble inserting the pin in the rotating assembly to change pads. It is a little challenging at times since there are two holes to align but it's not been a big issue.- The air hose fitting that was included fit the same quick disconnect that all my other tools use, with no leakage.-The only issue I've encountered is with the unit spitting oil on the wood. So I attached a cloth sleeve on the exhaust to absorb the oil when it is discharged. See photo.- I can't speak to quality of the included sanding disks since I bought another brand due to the grit numbers I needed.- I've been using the 1" and 2" backing pads. No issues after several hours of sanding. Really pleased with the unit at this point.
Javier M.
2025-05-06 13:13:55
Cheap junk - immediately started leaking air. Item is poorly built. leaking air constantly, trigger works half the time.
Air Rover
2025-04-28 18:28:02
This did not come with 45 pcs of sanding discs. We did get the sander itself and the pads.
Pedram
2025-04-11 11:15:39
Perfect to get the job done, amazing & lots of flexibility …… so happy to get it
Eje581
2025-04-05 15:59:52
I use it for all kinds of work. Woodwork, 3D printer, bodywork on cars and so on. Handy little tool, easy to use. Good buy.
Joly angelique
2025-01-05 18:06:44
Offert pour un cadeau à mon mari donc pas encore testerJe l ai quand même ouvert, al air de bonne facture un peu lourde toutefois
ChristineThibault
2025-01-01 17:32:52
Très heureux de l'achat car chacune des pièces est utile
eddie boddice
2024-11-17 13:48:36
Was very pleased with the result easy to handle does a great job
Recommended Products
$45.67
$ 20 .99 $20.99