Your cart is empty.
Your cart is empty.
Details
The Quarter Inch Piecing Presser Foot is used for quilting ¼” seam allowances, a must-have for piecing quilt tops! It can be used for small projects with narrow seam allowances like baby clothes and doll clothes. The red guide lines on the foot help you master perfect corners! Use only a straight stitch with this presser foot and make sure to turn the hand wheel toward you prior to sewing to ensure that the needle clears the foot’s opening.
Instructions
Be sure your sewing machine is set to straight stitch, center needle position. Turn the handwheel toward you slowly and check to see that the needle clears the small opening in the foot. If it does not clear the small opening, use the stitch width control to move the needle until it lines up with the hole of the foot without hitting the foot. Place your fabric under the presser foot and align the raw edge of the fabric with the right hand side of the presser foot for an accurate 1/4 inch seamline. As you begin sewing, hold the thread tails at the back of the foot to keep them secure and prevent thread tangling.
Pivoting
The foot has horizontal markings for multi-purpose uses in sewing. The horizontal marking closest to the front is a 1/4 inch guide useful when pivoting at a seamline corner with a 1/4 inch seam allowance. To pivot using the guideline at the front, sew your seam up to the corner, but stopping when the edge of the fabric aligns with the 1/4 inch horizontal guideline. Then, put the needle down in the fabric. With the needle down in the fabric, raise the presser foot, turn the fabric to sew the remainder of the seam, aligning the raw edge of the fabric with the righthand edge of the presser foot. Lower the presser foot then continue sewing a 1/4 inch seam. The remaining two horizontal markings can also be used for pivoting. The center horizontal mark is used for a 3/8 inch seam and the horizontal mark closest to the needle opening is used for a 1/2 inch seam.
SINGER Futura sewing & embroidery machine sold separately For use with the SINGER Futura XL-400 sewing and embroidery machine model. System Requirements • PC with 1 GHz Intel or AMD Processor • Windows OS: Windows XP / Vista / 7 • 1GB of RAM (or more recommended) • CD-ROM Drive • 500 MB (or more recommended) of Available Hard-Disk Space for Installation • Color Standard (1024 x 768 Pixel; 65,000 Colors Recommended) VGA Adaptor Connected with a Color VGA Monitor • Microsoft Compatible Mouse • USB 1.1/2.0.
Laura of Harvest Lane Cottage
2025-08-23 13:38:10
This is a great presser foot that works well with my Singer One machine.
John Montgomery
2025-08-12 16:30:26
Really easy to use. I didn’t want to sew a project by hand.
Carolyne T
2025-07-25 19:10:22
Perfect fit on my machine and accurate quarter inch.
Stephanie Fox
2025-07-23 13:00:27
I had this foot for a long time and lost it, so just bought a replacement. I really like this foot, it helps my accuracy. It can be used on all three of my machines (singer and Jukix2) so can probably be used on any low shank machine.
Rita H
2025-07-03 18:30:10
Metal 1/4-inch foot not as easy to use as the clear plastic 1/4-inch foot. Likely more durable than the plastic foot.
N. Yoder
2025-06-29 11:18:32
Greatly improved my 1/4" seams. Should have invested in this item long before now.
David Cox
2025-06-12 15:47:34
Quilting! Great quarter inch foot.
Pamela Frank
2025-05-28 17:13:36
Quality product and prompt delivery
Cynthia Clement
2025-04-25 18:41:00
I was looking for an open 1/4" foot for my Singer Featherweight C240 and this works well. The only drawback is that you cannot engage the IEF System with it. A bonus is that it also works with my Janome Memory Craft 6500
Lucky Cat Mama
2025-04-19 12:30:07
Este prensatelas es muy útil para coser a 1/4 y 1/8 de pulgadas sin mayor problema y a diferencia del que viene con mi máquina que es de plástico, éste es de metal por lo que es mucho más duradero y las marcas no se borran.
Lise
2025-03-26 10:31:14
This arrived quickly and us a perfect fit.
Nadia R.
2025-03-20 19:57:58
Es muy útil para coser costuras angostas
Rita giesbrecht
2025-02-13 12:33:48
Fits my singer one perfectly and works great.
Recommended Products
