Your cart is empty.
Your cart is empty.Product Description
CB693 Installation Instructions - 3 Options
Option 1 - Existing Thread 3/8" - 16 UNC
1. Unscrew to remove the existing threaded item.
2. Screw the Rollerblade wheel into the existing 3/8" - 16 UNC thread and tighten it.
* Will Not Fit M10 Thread
Option 2 - Items With or Without Through Hole
1. Drill 7/16" (11mm) through hole.
2. Insert wheel thread into the hole.
3. Place the washer then nut over the thread, and tighten with a wrench.
(4 Washers & 4 Nuts Included)
Option 3 - Items with a Blind Hole
1. Drill 1/2" (12.5mm) hole x 1" (25mm) deep.
2. Use 3/8" (10mm) Hex Key to install Insert Nut until flush with the surface.
3. Screw Rollerblade Wheel into Insert Nut & Tighten.
Optional - Screw on supplied Nut first then lock when at the desired height.
(4 Steam Insert Nuts & 4 Nuts Included)
Terri
2025-08-31 14:39:23
Perfect fit for very heavy antique dresser. Almost went with wooden wheels, saw these, went with them for wooden floor protection. Glad we did everything was included to enable a perfect fit, into wobbled out hole, for wheel placement Had no problem placing castors The appearance of the castors look great on dresser. The ease of moving the dresser is 100% easier. Smoothly glides into place with little effort. The locking breaks work very well to keep dresser and people safe Win win as I like to rearrange rooms often . Very sturdy castors and braking system
Jason Artis
2025-08-28 10:12:15
I added these to a 300lb steel conference table to roll over laminate floor because I couldn’t scoot it or lift it easily. Easy to roll, quiet, locks work great. So far no marks on the floor. Size fits perfectly. I can relocate the table as needed
Mr. Keo
2025-08-15 11:32:11
I recently purchased a nice foldable creeper from a local auto parts store that was great for everything except how it rolled in my driveway. The original plastic casters were loud, jarring, and already wearing down in the first day of moderate use. So I ordered these bad boys without first checking their listed 3/4" threaded shaft length. Needless to say the included lock washers and nut were useless since it wouldn't fit all the way through. But, after boring out the hole the originals ones went through with a step bit I could actually thread these new casters in which left the top of the shaft exposed. Put a little JB Weld that I had handy in the gap and voila! These are more durable, more smooth, and much better wearing. Plus I now have the option to lock myself in position if need be. I'm sure now these casters will outlast the creeper itself.
RedReader
2025-08-11 12:20:33
When I built my desk, it came with fixed leveling screw in feet. Which whil working great for the purpose didn’t make it easy to move. So, when moving, i decided that locking, rolling wheels would be a great addition. The desk is white with a light colored top so was hoping for something that would not look like a statement. I needed screw in wheels that could hold hundreds of pounds. These were one of the few that had good ratings and locked, and weren’t obnoxious looking. Giving only 4 stars because I really wanted the clear ones, that I ordered, but post move, didn’t have time to wait to return to get what i originally ordered.
JTN from Seattle
2025-08-08 13:41:13
I was both amused and encouraged to see another review with the same exact use case as mine: Adding casters to a standing desk. My standing desk is from Ikea. When I received the casters I was prepared to hack the desk with a drill to fasten the casters on. I didn't have to. I was so happy to discover the desk already had threads underneath that fit perfectly! I'm happier than ever and will be buying another set for a book shelf that I want to easily move around. Thank you, Australia, for this solution!
Fess
2025-08-02 10:30:16
The OEM hard 2" locking wheels on our portable flight simulato,r made for a rough ride over sidewalk cracks and the wheels would slip on smooth floors even though locked. The 3 " wheels provide a smoother ride, are easy to lock and they don't slip. Well made product with and good price point.Jim
E Watkins
2025-07-13 18:35:24
I changed out the wheels on my office chair to be quiter on the floor at night and I am pleased to say that these are worth the upgrade.
NatalieL
2025-07-03 14:00:10
The image of the spec for the post length is 3/4" without a fixed hexagonal nut, and the product received has a 1" long post above a fixed hexagonal nut and is too long for dress form mannequin base.
stuart
2025-06-22 11:33:58
Make sure you have a 10mm drill bit if you plan on using the threaded insert.I put these on the bottom of my desk so I could move it around over laminate and a thin carpet and they work great. Very smooth and have zero issue transitioning or moving on the carpet, just zips about. The breaks keep it in place when I'm working or bump it.
Marc Bailey
2025-05-06 11:03:04
Awesome wheels that are thread compatible with Rack Technologies data racks due to 3/8th threads (note M10 is not compatible). Delivered very fast via Prime. Will buy again. Recommended. I wish there were surface mount versions of the same wheels. Cheaper than buying individual wheels at Bunnings, and much higher quality.
Mike Johnson
2025-04-13 17:02:35
Installed on my rolling seat. I can now roll all over the shop as needed. This is my third set of wheels and so far the best!
Steve
2025-04-09 14:44:02
I’ve got these wheels on my weight plate stack. Pretty sure the stack is heavier than what the box maximum load says but it’s still working well
Thinking.space
2025-02-01 09:00:07
I installed these on a stool that i use for welding. I am now the fastest welder in the shop. I can travel 40-50 feet on a single push off while others with their garbage plastic wheels get hung up on a staple.
Recommended Products